Sun Hydraulics 4-Way, 3-Position, Pilot-to-Shift Directional Valve — DCCC to DDHC, Series 1 to 4

Sun Hydraulics 4-Way, 3-Position, Pilot-to-Shift Directional Valve: DCCC to DDHC, series 1 to 4, 7 - 10 gpm to 80 gpm (28 - 40 L/min to 320 L/min), T-61A, T-62A, T-52A, T-63A, T-53A, T-64A and more cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Pilot-to-Shift Directional Spool Valve
- Capacity: 7 - 10 gpm to 80 gpm (28 - 40 L/min to 320 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-61A, T-62A, T-52A, T-63A, T-53A, T-64A, T-54A
- Valve function
- Pilot-to-Shift Directional Spool Valve
- Series (frame sizes)
- 1 to 4
- Cavity
- T-61A, T-62A, T-52A, T-63A, T-53A, T-64A, T-54A
Product description
A spool directional cartridge moved by hydraulic pilot pressure instead of a solenoid. The 4-way versions are 6-port valves with supply at port 3 and pilot ports X and Y (ports 5 and 6); all ports, pilot ports included, take 5,000 psi (350 bar). A choice of spools sets the flow paths.
Sizes and cavities
Sun Hydraulics builds this valve in 7 versions:
- DCCC — series 1, T-61A cavity, 7 - 10 gpm (28 - 40 L/min)
- DCDC — series 2, T-62A cavity, 11 - 30 gpm (38 - 120 L/min)
- DDDC — series 2, T-52A cavity, 20 gpm (80 L/min)
- DCEC — series 3, T-63A cavity, 25 - 100 gpm (95 - 380 L/min)
- DDFC — series 3, T-53A cavity, 40 gpm (160 L/min)
- DCFC — series 4, T-64A cavity, 50 - 200 gpm (200 - 760 L/min)
- DDHC — series 4, T-54A cavity, 80 gpm (320 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Minimum pilot pressure to shift: 175 psi (12 bar), 150 psi (10,5 bar), 125 psi (9 bar), 200 psi (14 bar)
- Maximum leakage: 2 in³/min.@1000 psi (30 cc/min.@70 bar), 10 in³/min.@1000 psi (160 cc/min.@70 bar), 5 in³/min.@1000 psi (80 cc/min.@70 bar)
Configuration options
The letters after the base model code choose these options (shown for DCCC; a size may add or drop a choice):
- Control: X — Standard Pilot
- Spool / poppet configuration: A — A to T Center, B — B to T Center, C — Blocked Center, F — Closed Center, A and B to T, H — Open Center, N — P to A and B to T Center, R — Regen Center, T — Tandem Center, W — A and B Bleed to T Center, Y — A and B to T Center, X — P to B and A to T Center
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X.
Selection notes
- Capacity depends on the spool: flow forces can stop a spool reaching full stroke at high flow and pressure, so higher flows are possible at lower pressures.
- Check the minimum pilot pressure in the ratings against your pilot supply.
Where it is used
Main-stage directional control piloted from a joystick, a remote pilot valve or a small solenoid pilot.
Installation and seal kits
Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990061007, Polyurethane: 990061002, Viton: 990061006; series 2: Buna: 990062007, Polyurethane: 990062002, Viton: 990062006, Buna: 990052007, Viton: 990052006; series 3: Buna: 990063007, EPDM: 990063014, Polyurethane: 990063002, Viton: 990063006, Buna: 990053007, Viton: 990053006; series 4: Buna: 990064007, EPDM: 990064014, Polyurethane: 990064002, Viton: 990064006, Buna: 990054007, Viton: 990054006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DCCCXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Pilot-to-Shift Directional Spool Valve |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-61A, T-62A, T-52A, T-63A, T-53A, T-64A, T-54A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7 - 10 gpm to 80 gpm (28 - 40 L/min to 320 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 2 in³/min.@1000 psi (30 cc/min.@70 bar), 10 in³/min.@1000 psi (160 cc/min.@70 bar), 5 in³/min.@1000 psi (80 cc/min.@70 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Standard Pilot; A — A to T Center, B — B to T Center, C — Blocked Center, F — Closed Center, A and B to T, H — Open Center, N — P to A and B to T Center, R — Regen Center, T — Tandem Center, W — A and B Bleed to T Center, Y — A and B to T Center, X — P to B and A to T Center |
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990061007, Polyurethane: 990061002, Viton: 990061006; series 2: Buna: 990062007, Polyurethane: 990062002, Viton: 990062006, Buna: 990052007, Viton: 990052006; series 3: Buna: 990063007, EPDM: 990063014, Polyurethane: 990063002, Viton: 990063006, Buna: 990053007, Viton: 990053006; series 4: Buna: 990064007, EPDM: 990064014, Polyurethane: 990064002, Viton: 990064006, Buna: 990054007, Viton: 990054006 |
| Weight | .40 lb (0,20 kg) to 5.9 lb (2,7 kg) |
Shipping & lead time
Sizes & part numbers
7 sizes- Sun Hydraulics part no.DCCC
- Series
- 1
- Cavity
- T-61A
- Capacity
- 7 - 10 gpm / 28 - 40 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DCDC
- Series
- 2
- Cavity
- T-62A
- Capacity
- 11 - 30 gpm / 38 - 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DDDC
- Series
- 2
- Cavity
- T-52A
- Capacity
- 20 gpm / 80 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DCEC
- Series
- 3
- Cavity
- T-63A
- Capacity
- 25 - 100 gpm / 95 - 380 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DDFC
- Series
- 3
- Cavity
- T-53A
- Capacity
- 40 gpm / 160 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DCFC
- Series
- 4
- Cavity
- T-64A
- Capacity
- 50 - 200 gpm / 200 - 760 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DDHC
- Series
- 4
- Cavity
- T-54A
- Capacity
- 80 gpm / 320 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics DCCC to DDHC pilot-to-shift directional spool valve used for?▾
Which sizes and versions does the Sun Hydraulics DCCC to DDHC pilot-to-shift directional spool valve come in?▾
How do I read the Sun Hydraulics model code DCCCXCN for the DCCC to DDHC pilot-to-shift directional spool valve?▾
What is the maximum operating pressure of the Sun Hydraulics DCCC to DDHC pilot-to-shift directional spool valve?▾
What flow capacity does the Sun Hydraulics DCCC to DDHC pilot-to-shift directional spool valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics DCCC to DDHC pilot-to-shift directional spool valve come with?▾
Which cavity does the Sun Hydraulics DCCC to DDHC pilot-to-shift directional spool valve fit?▾
Which seal kit fits the Sun Hydraulics DCCC to DDHC pilot-to-shift directional spool valve?▾
How is the Sun Hydraulics DCCC to DDHC pilot-to-shift directional spool valve installed?▾
Where is the Sun Hydraulics DCCC to DDHC pilot-to-shift directional spool valve used?▾
Sun Hydraulics DCCC to DDHC or DCCF, DCDF, DCEF, DCFF: what is the difference?▾
Do you stock the Sun Hydraulics DCCC to DDHC in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








