Steel BSPP Male Cross, forged carbon steel, trivalent zinc plated. 1 part number, 1/2"; the size table gives the size on each end for every Indus part number.
Key features
- Body Configuration: cross
- Port A Thread: BSPP, 1/2" (G1/2-14)
- Port A Sealing: BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread
- Nominal Size Range: 1/2"
- Body Configuration
- cross
- Port A Thread
- BSPP, 1/2" (G1/2-14)
- Port A Sealing
- BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread
Product description
The Steel BSPP Male Cross is a cross, in forged carbon steel, trivalent zinc plated. It has four BSPP male ends. BSP adapters join British Standard Pipe ports, common on European and Asian equipment, to JIC, NPT and ORB lines.
Construction
- Body: cross
- End 1: BSPP male
- End 2: BSPP male
- End 3: BSPP male
- Ends: 4, all BSPP male
- Material: forged carbon steel, trivalent zinc plated
Ends and sealing
- BSPP: BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread; ISO 228-1.
Sizes
1 part number, 1/2". The Sizes & Part Numbers tab lists the size on each end for every one.
- End 1: BSPP, 1/2" (G1/2-14)
- End 2: BSPP, 1/2" (G1/2-14)
- End 3: BSPP, 1/2" (G1/2-14)
Pressure rating
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | cross |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | BSPP, 1/2" (G1/2-14) |
| Port A Sealing | BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | BSPP, 1/2" (G1/2-14) |
| Port B Sealing | BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread |
| Port B Gender | male |
Port C
| Parameter | Value |
|---|---|
| Additional Ports | BSPP male, BSPP male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/2" |
Construction
| Parameter | Value |
|---|---|
| Material | forged carbon steel, trivalent zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228-1 |
Shipping & lead time
Sizes & part numbers
1 size| Indus part no. | End 1 | End 2 | End 3 |
|---|---|---|---|
| IH-ST-9096-08 | 1/2" BSPP (G1/2-14) | 1/2" BSPP (G1/2-14) | 1/2" BSPP (G1/2-14) |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- BSP Außengewinde mit O-Ring Kreuzstück
- fr
- mâle BSP avec joint torique croix
- es
- macho BSP con junta tórica cruz
- it
- maschio BSP con O-ring croce
From the blog
Written about this range
Thread & fitting identification
BSPP bonded seals and dowty washers: getting the size right
A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.
5 min read
Thread & fitting identification
Fittings on a used Japanese machine: the 30° seat problem
Two common families share a 30° seat and use different threads underneath it. Checking the angle alone tells you they match, and they do not — here is how to separate them.
3 min read
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Engineers viewing this also looked at
Steel JIC 37° Male × BSPP Adjustable Branch Tee
Steel JIC 37° Male × BSPT Male Run Tee
Steel JIC 37° Male × BSPT Male Branch Tee
Steel JIC 37° Male × BSPP Female Flat-Face Swivel Adapter
Steel Komatsu M16 Male × BSPT Male Adapter
Steel JIC 37° Male × BSPP Female Swivel Adapter
Bulkhead Locknut
