Stock Anchor

Stock Anchor, in 14 sizes. Indus part numbers.
Key features
- Product type: Stock Anchor
- Size range: 10 kg to 12,000 kg
Product description
Stock anchor.
Sizes
14 sizes, from 10 kg to 12,000 kg. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the anchor type and mass, and whether a classification-society certificate is required.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stock Anchor |
| Sizes | 14 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 10 kg to 12,000 kg |
Shipping & lead time
Sizes & part numbers
14 sizes- Indus part no.IH-MR-AN-STK-10KG
- Size
- 10 kg
- A (mm)
- 650
- B (mm)
- 400
- C (mm)
- 100
- D (mm)
- 150
- Indus part no.IH-MR-AN-STK-25KG
- Size
- 25 kg
- A (mm)
- 890
- B (mm)
- 550
- C (mm)
- 130
- D (mm)
- 200
- Indus part no.IH-MR-AN-STK-50KG
- Size
- 50 kg
- A (mm)
- 960
- B (mm)
- 635
- C (mm)
- 185
- D (mm)
- 230
- Indus part no.IH-MR-AN-STK-75KG
- Size
- 75 kg
- A (mm)
- 1,105
- B (mm)
- 710
- C (mm)
- 210
- D (mm)
- 266
- Indus part no.IH-MR-AN-STK-100KG
- Size
- 100 kg
- A (mm)
- 1,215
- B (mm)
- 780
- C (mm)
- 230
- D (mm)
- 293
- Indus part no.IH-MR-AN-STK-150KG
- Size
- 150 kg
- A (mm)
- 1,395
- B (mm)
- 900
- C (mm)
- 265
- D (mm)
- 336
- Indus part no.IH-MR-AN-STK-200KG
- Size
- 200 kg
- A (mm)
- 1,535
- B (mm)
- 990
- C (mm)
- 290
- D (mm)
- 370
- Indus part no.IH-MR-AN-STK-300KG
- Size
- 300 kg
- A (mm)
- 1,755
- B (mm)
- 1,105
- C (mm)
- 330
- D (mm)
- 423
Show all 14 sizesShow fewer sizes
- Indus part no.IH-MR-AN-STK-500KG
- Size
- 500 kg
- A (mm)
- 2,080
- B (mm)
- 1,335
- C (mm)
- 390
- D (mm)
- 502
- Indus part no.IH-MR-AN-STK-700KG
- Size
- 700 kg
- A (mm)
- 2,330
- B (mm)
- 1,500
- C (mm)
- 440
- D (mm)
- 560
- Indus part no.IH-MR-AN-STK-1000KG
- Size
- 1,000 kg
- A (mm)
- 2,620
- B (mm)
- 1,685
- C (mm)
- 495
- D (mm)
- 633
- Indus part no.IH-MR-AN-STK-2000KG
- Size
- 2,000 kg
- A (mm)
- 3,300
- B (mm)
- 2,140
- C (mm)
- 625
- D (mm)
- 797
- Indus part no.IH-MR-AN-STK-3000KG
- Size
- 3,000 kg
- A (mm)
- 3,780
- B (mm)
- 2,415
- C (mm)
- 715
- D (mm)
- 912
- Indus part no.IH-MR-AN-STK-12000KG
- Size
- 12,000 kg
- A (mm)
- 5,770
- B (mm)
- 4,150
- C (mm)
- 961
- D (mm)
- 1,530
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the stock anchor and what sizes does it come in?▾
How do I read the Indus part number on the stock anchor?▾
Which sizes does the stock anchor come in?▾
How do I choose the mass of the stock anchor?▾
What holding power or proof load does the stock anchor have?▾
What is the stock anchor made from?▾
Which standard or certificate applies to the stock anchor?▾
What anchor chain and shackles go with the stock anchor?▾
What should I check before supplying a stock anchor?▾
Where is the stock anchor used?▾
Stock anchor compared with the JIS stock anchor?▾
Do you stock the stock anchor, and how do I request a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Types of marine anchors: stockless, Hall, Pool, HHP, Admiralty, fluke, claw and offshore drag anchors
Ship anchors, small-craft anchors and offshore mooring anchors are different families with different jobs. The anchor types we list, how each one holds, the mass ranges available and what to specify when ordering one.
7 min read
Anchor chain & mooring
Equipment number: how a ship’s anchors and anchor chain are sized
Classification rules size a ship’s anchors and chain from a single figure, the equipment number. What it represents, how to read the equipment table to find anchor mass, total chain length and chain diameter in each grade, and why a high-holding-power anchor and a higher chain grade change the answer.
5 min read
Anchor chain & mooring
Anchor proof load testing: test loads by anchor mass, and why HHP anchors are tested harder
Every ship’s anchor is proof loaded before it is certified, to a load set by its mass. The proof test load for anchors from 50 kg to 48 tonnes, how high-holding-power anchors are treated, what the test proves, and what to check on the certificate.
4 min read








