Spool Adapters: Type DD Female × Female Coupler Spool
Sealfast Type DD spool adapter — female coupler on BOTH ends. Joins two male adapters (Type A / E / F) adapter-to-adapter. Note: distinct from the DD elbow — this is a straight spool.
Key features
- Coupling Family: Specialty Cam & Groove Coupling
- Coupling Type / Variant: Type DD spool adapter (Female × Female cam coupler)
- End A Configuration: Female coupler (with cam arms)
- End B Configuration: Female coupler (with cam arms) — opposite end
- Size Range: 1 1/2", 2", 3", 3 x 2", 3 x 2 1/2", 3 x 4", 4", 4 x 1 1/2", 6 x 6"
- Working Pressure: Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet
- Coupling Family
- Specialty Cam & Groove Coupling
- Coupling Type / Variant
- Type DD spool adapter (Female × Female cam coupler)
- End A Configuration
- Female coupler (with cam arms)
- End B Configuration
- Female coupler (with cam arms) — opposite end
- Size Range
- 1 1/2", 2", 3", 3 x 2", 3 x 2 1/2", 3 x 4", 4", 4 x 1 1/2", 6 x 6"
- Working Pressure
- Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet
Product description
The Spool Adapters: Type DD Female × Female Coupler Spool is a Specialty Cam & Groove Coupling from the Sealfast US industrial coupling range. Indus Hydraulics is an authorised Sealfast distributor in the UAE.
Configuration
- Coupling family: Specialty Cam & Groove Coupling
- Coupling type: Type DD spool adapter (Female × Female cam coupler)
- End A: Female coupler (with cam arms)
- End B: Female coupler (with cam arms) — opposite end
Specifications
- Size range: 1", 1-1/2", 2", 3", 4"
- Materials available: Aluminum, 316 Stainless Steel, Polypropylene
- Working pressure: Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet
- Seal / gasket: Buna-N (nitrile) standard. Viton (FKM), EPDM, PTFE, Neoprene available on request for chemical compatibility
- Applicable standards: MIL-A-A-59326 (US), EN 14420-7 (Europe), ANSI B16.5 (flanged variants)
Family context
Sealfast specialty cam & groove couplings extend the standard Type A-F / DA-DD / DC-DP cam-and-groove range with bespoke end configurations: socket-weld for permanent pipe attachment (Type AW, DW), ANSI 150 flanged for refinery / chemical-plant standardisation (Type FA, FC), lockable dust caps for hazardous-fluid security (Type DCL), male-male spool adapters for adapter-to-adapter joining (Type SA, DD), and reducing variants for size transitions inline (AR, BR, BLN, CR, DR, DR, ER, DA reducing). Cam-and-groove geometry is industry-standard and interchangeable with Dixon, OPW, PT Coupling, Banjo of the same Type letter.
How to order
Specify (a) the size, (b) the body material from the available options, and (c) any special seal / gasket requirements. Indus engineering will confirm the exact Sealfast part number on the RFQ. For Bauer couplings, specify the Bauer-standard size code (2", 3", 4", 5", 6", 8") and end configuration. For Dry Disconnect, specify the seal compound (Viton FKM for petroleum / fuel; PTFE for aggressive chemical) — selection drives the part number.
Companion products
Pair with matching cam-and-groove halves (specialty cam-and-groove), Bauer-standard mating couplings (Bauer Type), or matching dry-disconnect adapter/coupler (Dry Disconnect). Browse the Sealfast Couplings range for the full product family.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Specialty Cam & Groove Coupling |
| Coupling Type / Variant | Type DD spool adapter (Female × Female cam coupler) |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Female coupler (with cam arms) |
| End B Configuration | Female coupler (with cam arms) — opposite end |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1 1/2", 2", 3", 3 x 2", 3 x 2 1/2", 3 x 4", 4", 4 x 1 1/2", 6 x 6" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Aluminum, 316 Stainless Steel, Polypropylene |
| Seal / Gasket | Buna-N (nitrile) standard. Viton (FKM), EPDM, PTFE, Neoprene available on request for chemical compatibility |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | MIL-A-A-59326 (US), EN 14420-7 (Europe), ANSI B16.5 (flanged variants) |
Shipping & lead time
What is a Specialty Cam & Groove Coupling?▾
What are the end configurations?▾
What sizes are available?▾
What materials does this coupling come in?▾
What is the working pressure?▾
What seal / gasket is supplied?▾
Is this product compliant with industry standards?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Reducer / Increaser: Type DR Female Coupler × Female NPT Reducing D Cam and Groove Couplings
Type DW Socket Weld Specialty Cam and Groove Coupling
Reducer / Increaser: Type ER Male Adapter × Shank Reducing E Cam and Groove Couplings
150# Flanged Type FA: Type FA ANSI Class 150 Flanged Specialty Adapter Fittings
150# Flanged Type FC: Type FC ANSI Class 150 Flanged Couplers Stainless Steel
Type SA Male × Male Spool Adapter Cam and Groove Couplings
Reducer / Increaser: 316SS Female BSP × Male NPT Thread Reducer Fittings
