Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings

Sealfast 316 SS thread reducer — female NPSM straight on one end, male NPT taper on the other. Converts between NPSM swivel-style and NPT taper-thread standards on instrument or sample lines.
Key features
- Coupling Family: Thread Reducer Fitting
- Coupling Type / Variant: Thread reducer (Female NPSM × Male NPT)
- End A Configuration: Female NPSM straight pipe thread (parallel)
- End B Configuration: Male NPT taper thread
- Size Range: 1/4", 3/8", 1/2", 3/4", 1"
- Working Pressure: Up to 1500 psi at room temperature (refer to host pipe / fitting rating)
- Coupling Family
- Thread Reducer Fitting
- Coupling Type / Variant
- Thread reducer (Female NPSM × Male NPT)
- End A Configuration
- Female NPSM straight pipe thread (parallel)
- End B Configuration
- Male NPT taper thread
- Size Range
- 1/4", 3/8", 1/2", 3/4", 1"
- Working Pressure
- Up to 1500 psi at room temperature (refer to host pipe / fitting rating)
Product description
The Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings is a Thread Reducer Fitting from the Sealfast US industrial coupling range. Indus Hydraulics is an authorised Sealfast distributor in the UAE.
Configuration
- Coupling family: Thread Reducer Fitting
- Coupling type: Thread reducer (Female NPSM × Male NPT)
- End A: Female NPSM straight pipe thread (parallel)
- End B: Male NPT taper thread
Specifications
- Size range: 1/4", 3/8", 1/2", 3/4", 1"
- Materials available: 316 Stainless Steel only
- Working pressure: Up to 1500 psi at room temperature (refer to host pipe / fitting rating)
- Seal / gasket: PTFE tape or anaerobic thread sealant required on NPT thread
- Applicable standards: ANSI/ASME B1.20.1 (NPT), ANSI/ASME B1.20.1 (NPSM), ASTM A276 (316 SS)
Family context
Stainless-steel and brass thread reducers convert between BSP, NPT, and NPSM thread standards on instrument lines, sample lines, and low-pressure transfer assemblies. Used as inline adapters where the pipe-thread standard differs from the host-equipment standard.
How to order
Specify (a) the size, (b) the body material from the available options, and (c) any special seal / gasket requirements. Indus engineering will confirm the exact Sealfast part number on the RFQ. For Bauer couplings, specify the Bauer-standard size code (2", 3", 4", 5", 6", 8") and end configuration. For Dry Disconnect, specify the seal compound (Viton FKM for petroleum / fuel; PTFE for aggressive chemical) — selection drives the part number.
Companion products
Pair with matching cam-and-groove halves (specialty cam-and-groove), Bauer-standard mating couplings (Bauer Type), or matching dry-disconnect adapter/coupler (Dry Disconnect). Browse the Sealfast Couplings range for the full product family.
Sealfast part numbers
Order by the Sealfast part number for the material you need, or by the Indus part number in the size table.
| Size | 316 Stainless Steel |
|---|---|
| 3" × 2" | 3020N |
Part numbers from Seal Fast, Inc.’s catalogue at products.sealfast.com, checked 6 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Thread Reducer Fitting |
| Coupling Type / Variant | Thread reducer (Female NPSM × Male NPT) |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Female NPSM straight pipe thread (parallel) |
| End B Configuration | Male NPT taper thread |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1/4", 3/8", 1/2", 3/4", 1" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | 316 Stainless Steel only |
| Seal / Gasket | PTFE tape or anaerobic thread sealant required on NPT thread |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | Up to 1500 psi at room temperature (refer to host pipe / fitting rating) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ANSI/ASME B1.20.1 (NPT), ANSI/ASME B1.20.1 (NPSM), ASTM A276 (316 SS) |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-SPC-TR-NPSM-300-200
- Nominal size
- 3" × 2"
What are the Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings and what are they used for?▾
How do the part numbers for the Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings read?▾
What sizes do the Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings come in?▾
Which size of female NPSM x male NPT reducer should I order?▾
What is the working pressure of the Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings?▾
What are the Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings made from?▾
Which standards do the Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings follow?▾
What does the 316SS Female NPSM x Male NPT reducer connect?▾
How do I install and look after the Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings?▾
How does the NPSM x NPT reducer differ from the male NPT x female NPT reducer?▾
Where are the Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings made, and can you ship them from Dubai?▾
Are the Reducer / Increaser: 316SS Female NPSM × Male NPT Thread Reducer Fittings in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Reduzierung NPSM Innengewinde auf NPT Außengewinde
- fr
- réducteur NPSM femelle sur NPT mâle
- es
- reductor NPSM hembra a NPT macho
- it
- riduzione NPSM femmina a NPT maschio
From the blog
Written about this range
Industrial hose
Cam and groove coupling types: A, B, C, D, E, F, DC and DP explained
Eight letters cover almost every cam and groove fitting: which half has the cam arms, what is on the other end, and the pressure derate nobody prints on the box.
8 min read
Industrial hose
Flanged hose connections: ASME B16.5 flange types, classes and faces on industrial hose
Where a hose meets fixed pipework, it usually meets a flange. The flange types we stock, what Class 150 and 300 mean, RF against FF against RTJ, and the stub-end trick that lets the bolt holes line up.
5 min read








