Type DW Socket Weld Specialty Cam and Groove Coupling

Sealfast Type DW socket-weld coupler — female coupler on the cam side, socket-weld bevel on the back. Permanent pipe-end coupler for refinery / chemical-plant fixed-pipe service.
Key features
- Coupling Family: Specialty Cam & Groove Coupling
- Coupling Type / Variant: Type DW (Socket-Weld variant of Type D female coupler)
- End A Configuration: Female coupler (with cam arms) — engages a male adapter
- End B Configuration: Socket weld bevel — welds directly to a Schedule 40 / 80 pipe end
- Size Range: 2", 3", 4"
- Working Pressure: Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet
- Coupling Family
- Specialty Cam & Groove Coupling
- Coupling Type / Variant
- Type DW (Socket-Weld variant of Type D female coupler)
- End A Configuration
- Female coupler (with cam arms) — engages a male adapter
- End B Configuration
- Socket weld bevel — welds directly to a Schedule 40 / 80 pipe end
- Size Range
- 2", 3", 4"
- Working Pressure
- Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet
Product description
The Type DW Socket Weld Specialty Cam and Groove Coupling is a Specialty Cam & Groove Coupling from the Sealfast US industrial coupling range. Indus Hydraulics is an authorised Sealfast distributor in the UAE.
Configuration
- Coupling family: Specialty Cam & Groove Coupling
- Coupling type: Type DW (Socket-Weld variant of Type D female coupler)
- End A: Female coupler (with cam arms) — engages a male adapter
- End B: Socket weld bevel — welds directly to a Schedule 40 / 80 pipe end
Specifications
- Size range: 1", 1-1/2", 2", 3", 4"
- Materials available: Aluminum, 316 Stainless Steel
- Working pressure: Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet
- Seal / gasket: Buna-N (nitrile) standard. Viton (FKM), EPDM, PTFE, Neoprene available on request for chemical compatibility
- Applicable standards: A-A-59326 (US, formerly MIL-C-27487), EN 14420-7 (Europe), ANSI B16.5 (flanged variants)
Family context
Sealfast specialty cam & groove couplings extend the standard Type A-F / DA-DD / DC-DP cam-and-groove range with bespoke end configurations: socket-weld for permanent pipe attachment (Type AW, DW), ANSI 150 flanged for refinery / chemical-plant standardisation (Type FA, FC), lockable dust caps for hazardous-fluid security (Type DCL), male-male spool adapters for adapter-to-adapter joining (Type SA, DD), and reducing variants for size transitions inline (AR, BR, BLN, CR, DR, DR, ER, DA reducing). Cam-and-groove geometry is industry-standard and interchangeable with Dixon, OPW, PT Coupling, Banjo of the same Type letter.
How to order
Specify (a) the size, (b) the body material from the available options, and (c) any special seal / gasket requirements. Indus engineering will confirm the exact Sealfast part number on the RFQ. For Bauer couplings, specify the Bauer-standard size code (2", 3", 4", 5", 6", 8") and end configuration. For Dry Disconnect, specify the seal compound (Viton FKM for petroleum / fuel; PTFE for aggressive chemical) — selection drives the part number.
Companion products
Pair with matching cam-and-groove halves (specialty cam-and-groove), Bauer-standard mating couplings (Bauer Type), or matching dry-disconnect adapter/coupler (Dry Disconnect). Browse the Sealfast Couplings range for the full product family.
Sealfast part numbers
Order by the Sealfast part number for the material you need, or by the Indus part number in the size table. Dimensions in the size table are Sealfast’s, for the 316 stainless steel body, converted to millimetres and lettered as on the Sealfast datasheet linked on this page. Other materials share the coupling interface but can differ in body length and diameter — ask for the drawing of the material you are ordering. Working pressures are for the 316 stainless steel body and fall with size.
| Size | Working pressure | Aluminum | 316 Stainless Steel |
|---|---|---|---|
| 2" | 150 psi (10.3 bar) | DW200AL | DW200SSI |
| 3" | 150 psi (10.3 bar) | DW300AL | DW300SSI |
| 4" | 150 psi (10.3 bar) | DW400AL | DW400SSI |
| 6" | 75 psi (5.2 bar) | DW600AL | DW 600SSI |
Part numbers from Seal Fast, Inc.’s catalogue at products.sealfast.com, with dimensions and pressures from its datasheet, checked 6 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Specialty Cam & Groove Coupling |
| Coupling Type / Variant | Type DW (Socket-Weld variant of Type D female coupler) |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Female coupler (with cam arms) — engages a male adapter |
| End B Configuration | Socket weld bevel — welds directly to a Schedule 40 / 80 pipe end |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 2", 3", 4" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Aluminum, 316 Stainless Steel |
| Seal / Gasket | Buna-N (nitrile) standard. Viton (FKM), EPDM, PTFE, Neoprene available on request for chemical compatibility |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | A-A-59326 (US, formerly MIL-C-27487), EN 14420-7 (Europe), ANSI B16.5 (flanged variants) |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-SPC-DW-200
- Nominal size
- 2"
- D1 (mm)
- 73.5
- D2 (mm)
- 63.7
- D3 (mm)
- 60.7
- D4 (mm)
- 65.7
- H (mm)
- 60
- Indus part no.IH-SPC-DW-300
- Nominal size
- 3"
- D1 (mm)
- 106.5
- D2 (mm)
- 92.1
- D3 (mm)
- 89.7
- D4 (mm)
- 95.8
- H (mm)
- 67
- Indus part no.IH-SPC-DW-400
- Nominal size
- 4"
- D1 (mm)
- 132
- D2 (mm)
- 120.2
- D3 (mm)
- 115.1
- D4 (mm)
- 122
- H (mm)
- 67
- Indus part no.IH-SPC-DW-600
- Nominal size
- 6"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- D4 (mm)
- —
- H (mm)
- —
D1 — Dimension D1 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. D3 — Dimension D3 on the manufacturer dimension drawing. D4 — Dimension D4 on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
What is the Type DW Socket Weld Specialty Cam and Groove Coupling and what is it used for?▾
How do the part numbers for the Type DW Socket Weld Specialty Cam and Groove Coupling read?▾
What sizes does the Type DW Socket Weld Specialty Cam and Groove Coupling come in?▾
Which Type DW socket weld coupler size do I need for my pipe?▾
What is the working pressure of the Type DW Socket Weld Specialty Cam and Groove Coupling?▾
What is the Type DW Socket Weld Specialty Cam and Groove Coupling made from?▾
Which standards does the Type DW Socket Weld Specialty Cam and Groove Coupling follow?▾
What does the Type DW coupler connect to?▾
How do I install and look after the Type DW Socket Weld Specialty Cam and Groove Coupling?▾
How does the Type DW differ from the Type AW socket weld adapter?▾
Where is the Type DW Socket Weld Specialty Cam and Groove Coupling made, and can you ship it from Dubai?▾
Do you stock the Type DW Socket Weld Specialty Cam and Groove Coupling in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Kamlok-Kupplung
- fr
- raccord Camlock
- es
- acoplamiento Camlock
- it
- raccordo Camlock
From the blog
Written about this range
Industrial hose
Cam and groove coupling types: A, B, C, D, E, F, DC and DP explained
Eight letters cover almost every cam and groove fitting: which half has the cam arms, what is on the other end, and the pressure derate nobody prints on the box.
8 min read
Industrial hose
Flanged hose connections: ASME B16.5 flange types, classes and faces on industrial hose
Where a hose meets fixed pipework, it usually meets a flange. The flange types we stock, what Class 150 and 300 mean, RF against FF against RTJ, and the stub-end trick that lets the bolt holes line up.
5 min read








