Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings

Sealfast Type DA reducing coupling — female coupler on one end, male adapter on the other, with different cam sizes. Inline size transition without an additional fitting.
Key features
- Coupling Family: Specialty Cam & Groove Coupling
- Coupling Type / Variant: Type DA reducing (Female coupler × Male adapter, different sizes)
- End A Configuration: Female coupler (with cam arms) — larger size
- End B Configuration: Male adapter (cam-grooved) — smaller size
- Size Range: 1 1/2 x 1", 1 1/2 x 2", 2 x 1 1/2", 2 x 3", 2 x 4", 3 x 1 1/2", 3 x 2", 3 x 2 1/2", 3 x 4", 3 x 6", 4 x 1 1/2", 4 X 2", 4 x 3", 4 x 5", 4 x 6", 5 x 4", 6 x 3", 6 x 4", 6 x 5", 8 x 6"
- Working Pressure: Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet (rated to the smaller of the two sizes)
- Coupling Family
- Specialty Cam & Groove Coupling
- Coupling Type / Variant
- Type DA reducing (Female coupler × Male adapter, different sizes)
- End A Configuration
- Female coupler (with cam arms) — larger size
- End B Configuration
- Male adapter (cam-grooved) — smaller size
- Size Range
- 1 1/2 x 1", 1 1/2 x 2", 2 x 1 1/2", 2 x 3", 2 x 4", 3 x 1 1/2", 3 x 2", 3 x 2 1/2", 3 x 4", 3 x 6", 4 x 1 1/2", 4 X 2", 4 x 3", 4 x 5", 4 x 6", 5 x 4", 6 x 3", 6 x 4", 6 x 5", 8 x 6"
- Working Pressure
- Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet (rated to the smaller of the two sizes)
Product description
The Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings is a Specialty Cam & Groove Coupling from the Sealfast US industrial coupling range. Indus Hydraulics is an authorised Sealfast distributor in the UAE.
Configuration
- Coupling family: Specialty Cam & Groove Coupling
- Coupling type: Type DA reducing (Female coupler × Male adapter, different sizes)
- End A: Female coupler (with cam arms) — larger size
- End B: Male adapter (cam-grooved) — smaller size
Specifications
- Size range: Reductions: 2"→1", 2"→1-1/2", 3"→2", 4"→3", 4"→2", 6"→4"
- Materials available: Aluminum, 316 Stainless Steel
- Working pressure: Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet (rated to the smaller of the two sizes)
- Seal / gasket: Buna-N (nitrile) standard. Viton (FKM), EPDM, PTFE, Neoprene available on request for chemical compatibility
- Applicable standards: A-A-59326 (US, formerly MIL-C-27487), EN 14420-7 (Europe), ANSI B16.5 (flanged variants)
Family context
Sealfast specialty cam & groove couplings extend the standard Type A-F / DA-DD / DC-DP cam-and-groove range with bespoke end configurations: socket-weld for permanent pipe attachment (Type AW, DW), ANSI 150 flanged for refinery / chemical-plant standardisation (Type FA, FC), lockable dust caps for hazardous-fluid security (Type DCL), male-male spool adapters for adapter-to-adapter joining (Type SA, DD), and reducing variants for size transitions inline (AR, BR, BLN, CR, DR, DR, ER, DA reducing). Cam-and-groove geometry is industry-standard and interchangeable with Dixon, OPW, PT Coupling, Banjo of the same Type letter.
How to order
Specify (a) the size, (b) the body material from the available options, and (c) any special seal / gasket requirements. Indus engineering will confirm the exact Sealfast part number on the RFQ. For Bauer couplings, specify the Bauer-standard size code (2", 3", 4", 5", 6", 8") and end configuration. For Dry Disconnect, specify the seal compound (Viton FKM for petroleum / fuel; PTFE for aggressive chemical) — selection drives the part number.
Companion products
Pair with matching cam-and-groove halves (specialty cam-and-groove), Bauer-standard mating couplings (Bauer Type), or matching dry-disconnect adapter/coupler (Dry Disconnect). Browse the Sealfast Couplings range for the full product family.
Sealfast part numbers
Order by the Sealfast part number for the material you need, or by the Indus part number in the size table. Dimensions in the size table are Sealfast’s, for the aluminium body, converted to millimetres and lettered as on the Sealfast datasheet linked on this page. Other materials share the coupling interface but can differ in body length and diameter — ask for the drawing of the material you are ordering. The NAE and PTK 8″ bodies do not interchange. Working pressures are for the aluminium body and fall with size.
| Size | Working pressure | Aluminum | Brass | 316 Stainless Steel |
|---|---|---|---|---|
| 1-1/2" × 1" | 150 psi (10.3 bar) | DA 1510AL | — | DA 1510SS |
| 1-1/2" × 2" | 150 psi (10.3 bar) | DA 1520AL | — | DA 1520SS |
| 2" × 1" | — | — | — | DA 2010SS |
| 2" × 1-1/2" | 150 psi (10.3 bar) | DA 2015AL | — | DA 2015SS |
| 2" | — | — | — | DA 2020SS |
| 2" × 3" | 150 psi (10.3 bar) | DA 2030AL | DA 2030BR | DA 2030SS |
| 2" × 4" | 150 psi (10.3 bar) | DA 2040AL | — | DA 2040SS |
| 2-1/2" × 2" | — | — | — | DA 2520SS |
| 3" × 1-1/2" | 150 psi (10.3 bar) | DA 3015AL | — | DA 3015SS |
| 3" × 2" | 150 psi (10.3 bar) | DA 3020AL | DA 3020BR | DA 3020SS |
| 3" × 2-1/2" | 150 psi (10.3 bar) | DA 3025AL | — | — |
| 3" | — | — | — | DA 3030SS |
| 3" × 4" | 150 psi (10.3 bar) | DA 3040AL | DA 3040BR | DA 3040SS |
| 3" × 6" | 150 psi (10.3 bar) | DA 3060AL | — | — |
| 4" × 1-1/2" | 150 psi (10.3 bar) | DA 4015AL | — | — |
| 4" × 2" | 150 psi (10.3 bar) | DA 4020AL | DA 4020BR | DA 4020SS |
| 4" × 2-1/2" | 150 psi (10.3 bar) | DD 4025AL | — | DA 4025SS |
| 4" × 3" | 150 psi (10.3 bar) | DA 4030AL | DA 4030BR | DA 4030SS |
| 4" × 5" | 150 psi (10.3 bar) | DA 4050AL | — | — |
| 4" × 6" | 150 psi (10.3 bar) | DA 4060AL | — | DA 4060SS |
| 5" × 4" | 150 psi (10.3 bar) | DA 5040AL | — | — |
| 6" × 3" | 75 psi (5.2 bar) | DA 6030AL | — | — |
| 6" × 4" | 75 psi (5.2 bar) | DA 6040AL | DA 6040BR | DA 6040SS |
| 6" × 5" | 75 psi (5.2 bar) | DA 6050AL | — | — |
| 8" × 6" PTK | 75 psi (5.2 bar) | DA 8060ALPTK | — | — |
Part numbers from Seal Fast, Inc.’s catalogue at products.sealfast.com, with dimensions and pressures from its datasheet, checked 6 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Specialty Cam & Groove Coupling |
| Coupling Type / Variant | Type DA reducing (Female coupler × Male adapter, different sizes) |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Female coupler (with cam arms) — larger size |
| End B Configuration | Male adapter (cam-grooved) — smaller size |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1 1/2 x 1", 1 1/2 x 2", 2 x 1 1/2", 2 x 3", 2 x 4", 3 x 1 1/2", 3 x 2", 3 x 2 1/2", 3 x 4", 3 x 6", 4 x 1 1/2", 4 X 2", 4 x 3", 4 x 5", 4 x 6", 5 x 4", 6 x 3", 6 x 4", 6 x 5", 8 x 6" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Aluminum, 316 Stainless Steel |
| Seal / Gasket | Buna-N (nitrile) standard. Viton (FKM), EPDM, PTFE, Neoprene available on request for chemical compatibility |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | Up to 250 psi (1/2"–2"); 150 psi (3"–4"); 75 psi (5"–6") — derates with size, see datasheet (rated to the smaller of the two sizes) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | A-A-59326 (US, formerly MIL-C-27487), EN 14420-7 (Europe), ANSI B16.5 (flanged variants) |
Shipping & lead time
Sizes & part numbers
25 sizes- Indus part no.IH-SPC-DA-RED-150-100
- Nominal size
- 1-1/2" × 1"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- H (mm)
- —
- Indus part no.IH-SPC-DA-RED-150-200
- Nominal size
- 1-1/2" × 2"
- D1 (mm)
- 66
- D2 (mm)
- 53.9
- D3 (mm)
- 63.1
- H (mm)
- 133
- Indus part no.IH-SPC-DA-RED-200-100
- Nominal size
- 2" × 1"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- H (mm)
- —
- Indus part no.IH-SPC-DA-RED-200-150
- Nominal size
- 2" × 1-1/2"
- D1 (mm)
- 76
- D2 (mm)
- 63.7
- D3 (mm)
- 53.4
- H (mm)
- 130
- Indus part no.IH-SPC-DA-RED-200
- Nominal size
- 2"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- H (mm)
- —
- Indus part no.IH-SPC-DA-RED-200-300
- Nominal size
- 2" × 3"
- D1 (mm)
- 76
- D2 (mm)
- 63.7
- D3 (mm)
- 91.5
- H (mm)
- 144
- Indus part no.IH-SPC-DA-RED-200-400
- Nominal size
- 2" × 4"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- H (mm)
- —
- Indus part no.IH-SPC-DA-RED-250-200
- Nominal size
- 2-1/2" × 2"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- H (mm)
- —
Show all 25 sizesShow fewer sizes
- Indus part no.IH-SPC-DA-RED-300-150
- Nominal size
- 3" × 1-1/2"
- D1 (mm)
- 105.5
- D2 (mm)
- 92.1
- D3 (mm)
- 53.4
- H (mm)
- 145
- Indus part no.IH-SPC-DA-RED-300-200
- Nominal size
- 3" × 2"
- D1 (mm)
- 105.5
- D2 (mm)
- 92.1
- D3 (mm)
- 63.1
- H (mm)
- 152
- Indus part no.IH-SPC-DA-RED-300-250
- Nominal size
- 3" × 2-1/2"
- D1 (mm)
- 105.5
- D2 (mm)
- 92.1
- D3 (mm)
- 75.8
- H (mm)
- 152
- Indus part no.IH-SPC-DA-RED-300
- Nominal size
- 3"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- H (mm)
- —
- Indus part no.IH-SPC-DA-RED-300-400
- Nominal size
- 3" × 4"
- D1 (mm)
- 105
- D2 (mm)
- 92.1
- D3 (mm)
- 119.5
- H (mm)
- 162
- Indus part no.IH-SPC-DA-RED-300-600
- Nominal size
- 3" × 6"
- D1 (mm)
- 105.5
- D2 (mm)
- 92.1
- D3 (mm)
- 176
- H (mm)
- 185
- Indus part no.IH-SPC-DA-RED-400-150
- Nominal size
- 4" × 1-1/2"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- H (mm)
- —
- Indus part no.IH-SPC-DA-RED-400-200
- Nominal size
- 4" × 2"
- D1 (mm)
- 136
- D2 (mm)
- 120.2
- D3 (mm)
- 63.1
- H (mm)
- 155
- Indus part no.IH-SPC-DA-RED-400-250
- Nominal size
- 4" × 2-1/2"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- H (mm)
- —
- Indus part no.IH-SPC-DA-RED-400-300
- Nominal size
- 4" × 3"
- D1 (mm)
- 136
- D2 (mm)
- 120.2
- D3 (mm)
- 91.5
- H (mm)
- 163
- Indus part no.IH-SPC-DA-RED-400-500
- Nominal size
- 4" × 5"
- D1 (mm)
- —
- D2 (mm)
- —
- D3 (mm)
- —
- H (mm)
- —
- Indus part no.IH-SPC-DA-RED-400-600
- Nominal size
- 4" × 6"
- D1 (mm)
- 136
- D2 (mm)
- 120.2
- D3 (mm)
- 176
- H (mm)
- 176
- Indus part no.IH-SPC-DA-RED-500-400
- Nominal size
- 5" × 4"
- D1 (mm)
- 162
- D2 (mm)
- 146.1
- D3 (mm)
- 119.5
- H (mm)
- 170
- Indus part no.IH-SPC-DA-RED-600-300
- Nominal size
- 6" × 3"
- D1 (mm)
- 192.5
- D2 (mm)
- 176.5
- D3 (mm)
- 91.5
- H (mm)
- 139
- Indus part no.IH-SPC-DA-RED-600-400
- Nominal size
- 6" × 4"
- D1 (mm)
- 192.5
- D2 (mm)
- 176.5
- D3 (mm)
- 119.5
- H (mm)
- 139
- Indus part no.IH-SPC-DA-RED-600-500
- Nominal size
- 6" × 5"
- D1 (mm)
- 192.5
- D2 (mm)
- 176.5
- D3 (mm)
- 145.5
- H (mm)
- 163.5
- Indus part no.IH-SPC-DA-RED-800-600-PTK
- Nominal size
- 8" × 6" PTK
- D1 (mm)
- 258
- D2 (mm)
- 227.5
- D3 (mm)
- 176
- H (mm)
- 235
D1 — Dimension D1 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. D3 — Dimension D3 on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
What are the Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings and what are they used for?▾
How do the part numbers for the Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings read?▾
What sizes do the Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings come in?▾
Which Type DA reduction do I need to join two cam and groove sizes?▾
What is the working pressure of the Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings?▾
What are the Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings made from?▾
Which standards do the Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings follow?▾
What does the Type DA reducer connect?▾
How do I install and look after the Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings?▾
How does the Type DA reducer differ from the Type CR and Type ER reducers?▾
Where are the Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings made, and can you ship them from Dubai?▾
Are the Reducer / Increaser: Type DA Female Coupler × Male Adapter Reducing Cam and Groove Couplings in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Kamlok-Kupplung Typ DA Reduzierung Innengewinde
- fr
- raccord Camlock type DA réducteur femelle
- es
- acoplamiento Camlock tipo DA reductor hembra
- it
- raccordo Camlock tipo DA riduzione femmina
From the blog
Written about this range
Industrial hose
Cam and groove coupling types: A, B, C, D, E, F, DC and DP explained
Eight letters cover almost every cam and groove fitting: which half has the cam arms, what is on the other end, and the pressure derate nobody prints on the box.
8 min read
Industrial hose
Flanged hose connections: ASME B16.5 flange types, classes and faces on industrial hose
Where a hose meets fixed pipework, it usually meets a flange. The flange types we stock, what Class 150 and 300 mean, RF against FF against RTJ, and the stub-end trick that lets the bolt holes line up.
5 min read








