Push-Lock Hose, Nitrile, 300 psi
Push-Lock Hose, Nitrile, 300 psi: 5 part numbers, 1/4" to 3/4".
Key features
- Application Family: push-lock hose
- Inner Diameter Range: 1/4" to 3/4"
- Operating Temperature: −40 °F to 212 °F (−40 °C to 100 °C)
- Application Family
- push-lock hose
Product description
Push-on hose that needs no clamps or crimping: a special braid angle holds it on a push-lock barb. For air, water, and petroleum oils at low pressure.
Construction
- Tube: oil-resistant nitrile (Class A)
- Reinforcement: one textile braid
- Cover: oil-resistant neoprene (Class A), black, non-conductive
- Working pressure: 300 psi, as published
- Temperature: −40 °F to 212 °F (−40 °C to 100 °C)
Pressure
The manufacturer publishes 300 psi working pressure. Use push-lock barbs made for this hose; ordinary barbs need a clamp.
Sizes and supply
5 part numbers, 1/4" to 3/4". Each part number is one size in one supply form; the Sizes & Part Numbers tab lists them.
How to order
Quote the Indus part number, or send the hose bore, the length and the service. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Application Family | push-lock hose |
Dimensions
| Parameter | Value |
|---|---|
| Inner Diameter Range | 1/4" to 3/4" |
Performance
| Parameter | Value |
|---|---|
| Operating Temperature | −40 °F to 212 °F (−40 °C to 100 °C) |
Construction
| Parameter | Value |
|---|---|
| Construction | Tube: oil-resistant nitrile (Class A); Reinforcement: one textile braid; Cover: oil-resistant neoprene (Class A), black, non-conductive |
Shipping & lead time
Sizes & part numbers
5 sizes| Indus part no. | Supply | Hose bore |
|---|---|---|
| IH-HS-2112-04 | 50 ft pre-cut length | -04 · 1/4" |
| IH-HS-2112-06 | 50 ft pre-cut length | -06 · 3/8" |
| IH-HS-2112-08 | 50 ft pre-cut length | -08 · 1/2" |
| IH-HS-2112-10 | 50 ft pre-cut length | -10 · 5/8" |
| IH-HS-2112-12 | 50 ft pre-cut length | -12 · 3/4" |
Supply — Length and packaging the part number is supplied in, as published. Ask us for the dimension drawing if you need it stamped.
What pressure is it rated for?▾
What temperature range does it take?▾
Do you sell cut lengths?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Safety & HSE
Whip restraints and burst protection: what actually stops a failed hose hurting someone
A hose that lets go at a coupling becomes a moving object. Restraints, sleeves and guards each solve a different failure — and using the wrong one is the same as using none.
3 min read
Industrial hose
Compressed air hose selection: oil mist, temperature and the 40 bar exception
Most air hose on a site is rated 20 bar and looks the same. The differences that matter are the tube against compressor oil, the temperature off the discharge, and how the hose was built.
4 min read
Industrial hose
Universal air couplings explained: Chicago, claw and crowfoot, and the clip that holds them
The two-lug claw coupling on every compressor hose is called universal, Chicago and crowfoot, and it comes in American, European and Australian types. How they fit together, and what keeps one from letting go.
4 min read
Engineers viewing this also looked at
EPDM Air and Water Hose, Red, 150 psi
Low-Density Polyethylene Tubing, Translucent
Pressure Wash Hose, 1-Wire Braid, 4,000 psi
Anti-Static Air/Water Hose 20 Bar
Black Air/Water Hose 20 Bar
Yellow Air/Water Hose 20 Bar
Blue Multi Utility Hose 20 Bar
