Pressure Relief Valve, Spring-Loaded, 2 in × 1502 M×F, 15,000 psi, Sour Service

2 in × 1502 M×F spring-loaded PRV, 15,000 psi sour-service. NACE MR0175 compliant — sour-well frac iron over-pressure protection.
Key features
- Valve Type: Pressure Relief
- Nominal Size: 2 in
- Working Pressure: 15000 psi
- End Connection (Inlet): 2 in 1502 Male Weco Union
- Service Class: Sour (NACE MR0175)
- Valve Type
- Pressure Relief
- Nominal Size
- 2 in
- Working Pressure
- 15000 psi
- Pressure Class
- 15K
- End Connection (Inlet)
- 2 in 1502 Male Weco Union
- Service Class
- Sour (NACE MR0175)
Product description
The Pressure Relief Valve, Spring-Loaded, 2 in × 1502 M×F, 15,000 psi, Sour Service is a spring-loaded conventional pressure relief valve rated for 15,000 psi working pressure (15K class), 2 in 1502 Male Weco Union. NACE MR0175 / ISO 15156 sour-service compliant.
Spring-loaded conventional relief design — line pressure acts directly on the disc; the spring sets the opening (set) pressure. When line pressure exceeds set, the disc lifts off the seat and discharges to atmosphere or to the relief header until line pressure drops below the reseat (blowdown) pressure. Simple, robust, and field-serviceable.
Set pressure is made-to-order. Specify the required set pressure on the RFQ — typical setpoints range from 50% to 100% of the body pressure rating. Indus calibrates and seals the valve at the spec'd setpoint with a witness-test certificate.
Construction
- Type: Pressure Relief — Spring-Loaded
- Nominal size: 2 in
- Body material: Forged AISI 4130 — NACE MR0175 compliant
- Trim (disc + seat + nozzle): 316SS disc + nozzle, NACE-compliant Inconel X-750 spring
- Seal / soft goods: PEEK back-up + HNBR primary seals
- Inlet: 2 in 1502 Male Weco Union
- Outlet: 2 in 1502 Female Weco Union
Performance
Working pressure 15,000 psi. Set pressure factory-calibrated and bench-tested to the specified set pressure. NACE MR0175 / ISO 15156 sour-service compliant — material class EE.
Applications
- Sour-well frac iron protection
- H₂S-rated flow-back PRV
- Sour-gas pump discharge safety
- NACE-compliant pressure-pumping iron
Compliance
- Set-pressure test certificate with each valve
- NACE MR0175 / ISO 15156 (sour-service)
- Calibration and witness-test certificate at specified set pressure
- Mill test reports per EN 10204 3.1 / 3.2
How to order
Confirm (a) line operating pressure (typically 90% of set pressure), (b) required set pressure (the over-pressure protection threshold), (c) line fluid and temperature (affects orifice sizing per API 520), (d) discharge routing (atmosphere / relief header / closed flare), (e) service class (standard vs sour), (f) any required certifications (ASME UV stamp, API monogram, witness-test attendance). Indus quotes ex-works OEM with calibration and pre-shipment test certificates.
Companion products
Pair with a matched-rated isolation valve upstream (typically a manual gate or ball valve, locked-open) and a manual block valve on the discharge line for service / maintenance access. For relief headers handling H₂S, ensure the discharge piping is also NACE MR0175 compliant. Indus also supplies relief-system engineering services (orifice sizing per API 520, blowdown / over-pressure analysis) on request.
Identification
| Parameter | Value |
|---|---|
| Valve Type | Pressure Relief |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 2 in |
| End Connection (Inlet) | 2 in 1502 Male Weco Union |
| End Connection (Outlet) | 2 in 1502 Female Weco Union |
| Bore Type | Standard |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 15000 psi |
| Pressure Class | 15K |
| Service Class | Sour (NACE MR0175) |
Compliance
| Parameter | Value |
|---|---|
| API Specification | Other |
| PSL Class | N/A |
| PR Class | N/A |
| Material Class (API 6A) | EE |
Construction
| Parameter | Value |
|---|---|
| Body Material | Forged AISI 4130 — NACE MR0175 compliant |
| Trim Material | 316SS disc + nozzle, NACE-compliant Inconel X-750 spring |
| Seal / Elastomer Material | PEEK back-up + HNBR primary seals |
Shipping & lead time
What is a 2 in 15,000 psi spring-loaded pressure relief valve used for?▾
What does the Weco 1502 union end on the 2 in 15,000 psi spring-loaded pressure relief valve mean?▾
What end connections does the 2 in 15,000 psi spring-loaded pressure relief valve have?▾
Should I choose the 2 in 15,000 psi spring-loaded pressure relief valve or the 3-1/8 in 5,000 psi version?▾
What is the working pressure of the 2 in 15,000 psi spring-loaded pressure relief valve, and how is it tested?▾
What materials is the 2 in 15,000 psi spring-loaded pressure relief valve made from?▾
Is the 2 in 15,000 psi spring-loaded pressure relief valve suitable for sour (H2S) service, and which standard does it meet?▾
What set pressure can I specify for the 2 in 15,000 psi spring-loaded relief valve?▾
How is the 2 in 15,000 psi spring-loaded pressure relief valve operated and maintained?▾
How does the 2 in 15,000 psi spring-loaded pressure relief valve compare with a pilot-operated pressure relief valve?▾
Where is the 2 in 15,000 psi spring-loaded pressure relief valve made and can it be exported from Dubai?▾
Is the Pressure Relief Valve, Spring-Loaded, 2 in × 1502 M×F, 15,000 psi, Sour Service available from Indus Hydraulics in Dubai, and what is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Oilfield & pressure control
Oilfield pressure relief valves: spring-loaded or pilot-operated, union or flanged
A relief valve is the last device between an overpressure and a burst line. On a frac or well-service spread it is a spring-loaded valve with hammer-union ends on the treating iron; on a plant or a test separator it is more often a flanged valve, spring or pilot-operated. How each type opens, what set pressure tolerance means, why a union-end valve is not an API 526 valve, the limits on stainless in sour service, and how often relief valves are tested.
4 min read
Drilling rig equipment
Shear-pin or reset relief valve: protecting a mud pump with a PRV or an RRV
Oteco makes two relief valves for mud pumps and manifolds. The PRV opens when a calibrated shear pin breaks and must be re-pinned. The RRV snaps open at its set pressure, can be opened by hand and needs no pins. How each works, how the set pressure is chosen, and which to specify.
5 min read
Drilling rig equipment
Oteco drilling and wellsite equipment: the range, and how to order it in the Middle East
Oteco Inc. of Houston makes the consumable and wear parts of a drilling rig: mud gate valves, relief valves, gauges, pump pistons, float valves, wipers, BOP rubbers and more. A guide to the range by family, how to identify a part, and how to order it from an authorised Oteco distributor in the UAE.
6 min read







