Oteco Single-Acting Mud Pump Pistons — Premium & Bonded Urethane

Oteco Single-Acting Mud Pump Pistons — Premium & Bonded Urethane: single-acting premium and bonded urethane piston assemblies for triplex mud pumps, 2-3/4" to 9" liners, with 1" or 1-1/2"/1-5/8" straight bores — 46 part numbers by liner size, series and rod fit. Authorised Oteco distributor, UAE stock.
Key features
- Product type: Mud pump piston, single acting
- Model: Series A, B, K, L
- Sizes: 2-3/4" to 9" liners
- Fits: Triplex mud pumps (single-acting pistons), API-design
- Material / compound: Fabric-reinforced rubber or bonded polyurethane on a steel hub
- Product type
- Mud pump piston, single acting
- Model
- Series A, B, K, L
- Fits
- Triplex mud pumps (single-acting pistons), API-design
- Material / compound
- Fabric-reinforced rubber or bonded polyurethane on a steel hub
Product description
Single-acting premium and bonded urethane piston assemblies for triplex mud pumps, 2-3/4" to 9" liners, with 1" or 1-1/2"/1-5/8" straight bores.
Oteco makes two piston constructions for triplex and duplex mud pumps:
- Premium pistons — rubbers with a multi-ply, fabric-reinforced backing that gives positive, wear-resistant seals with high tensile strength and resistance to chemicals, hydrocarbons and abrasion. Oteco states that they are fully interchangeable with other API-design pistons.
- Bonded urethane pistons — a harder, denser polyurethane bonded to the hub in place of fabric-backed rubber. They resist abrasive fluids, chemicals and oil-based muds of varying aniline point, and give long life in triplex pumps that have ample liner cooling water.
Choose the piston by the liner size (the piston OD), the series (hub size — see the table), and the rod fit: double-acting pistons are bored with an API taper (API 3 to 6) or a GD1 taper; single-acting pistons have a 1-inch or a 1-1/2-inch or 1-5/8-inch straight bore.
Oteco piston series
| Series | Snap ring | Retainer plate bore | Liner sizes listed |
|---|---|---|---|
| A | SR20 (2") | 2" | 2-3/4" to 5" |
| K | SR24 (2-1/2") | 2-1/2" | 3-1/2" to 4-1/2" |
| B | SR30 (3") | 3" | 4-1/2" to 7-3/4" |
| L | SR36 (3-3/4") | 3-3/4" | 5" to 9" |
Liner sizes are decoded from Oteco's part codes — I44 is a 4-1/2-inch piston (inches plus eighths), B the series and the last digits the taper or bore. We confirm the exact piston against your pump and rod before shipping.
Related listings
- Oteco double-acting premium pistons
- Oteco piston rubbers and replacement kits
- Oteco piston hubs, plates and snap rings
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number, or the pump or swivel make and model and the liner size, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Product type | Mud pump piston, single acting |
| Model | Series A, B, K, L |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Sizes | 2-3/4" to 9" liners |
Compatibility
| Parameter | Value |
|---|---|
| Fits | Triplex mud pumps (single-acting pistons), API-design |
Construction
| Parameter | Value |
|---|---|
| Material / compound | Fabric-reinforced rubber or bonded polyurethane on a steel hub |
Shipping & lead time
Sizes & part numbers
46 sizes- Indus part no.IH-OTC-640000
- Description
- Premium piston assembly, single acting, series A, 1" straight bore
- Fits
- 3" liner
- Indus part no.IH-OTC-640001
- Description
- Premium piston assembly, single acting, series A, 1-5/8" straight bore
- Fits
- 3" liner
- Indus part no.IH-OTC-640002
- Description
- Premium piston assembly, single acting, series K, 1" straight bore
- Fits
- 3-1/2" liner
- Indus part no.IH-OTC-640004
- Description
- Premium piston assembly, single acting, series K, 1-1/2" or 1-5/8" straight bore
- Fits
- 3-1/2" liner
- Indus part no.IH-OTC-640005
- Description
- Premium piston assembly, single acting, series K, 1" straight bore
- Fits
- 4" liner
- Indus part no.IH-OTC-640007
- Description
- Premium piston assembly, single acting, series K, 1-1/2" or 1-5/8" straight bore
- Fits
- 4" liner
- Indus part no.IH-OTC-640008
- Description
- Premium piston assembly, single acting, series K, 1" straight bore
- Fits
- 4-1/4" liner
- Indus part no.IH-OTC-640009
- Description
- Premium piston assembly, single acting, series L, 1-1/2" or 1-5/8" straight bore
- Fits
- 6-1/2" liner
Show all 46 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. Fits — Model, size or equipment the maker lists the part or kit for. Ask us for the dimension drawing if you need it stamped.
What are Oteco single-acting mud pump pistons?▾
How do I read Oteco piston part IH-OTC-640038 and series codes A, B, K and L?▾
What liner sizes does each single-acting Oteco piston series cover?▾
Which Oteco single-acting piston has a 1" bore and which has a 1-1/2" or 1-5/8" bore?▾
Which Oteco piston do I need for a large 8" or 9" triplex liner?▾
When should I choose a bonded urethane Oteco piston over a premium piston?▾
Does Oteco publish a standard for its mud pump pistons?▾
What replacement parts fit an Oteco single-acting piston?▾
How do I confirm the right single-acting Oteco piston for my pump?▾
Which pumps use Oteco single-acting pistons?▾
Who makes the Oteco single-acting mud pump pistons?▾
How do I order an Oteco single-acting piston in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Drilling rig equipment
Mud pump pistons: double or single acting, series, liner size and urethane or rubber
A mud pump piston is chosen by liner size, hub series and rod fit, then by compound. How double-acting and single-acting pistons differ, what the series letters A, B, K and L mean, how to read an Oteco piston part number, and what to send for a quote.
6 min read
Drilling rig equipment
Mud pump valves, seats and pulsation dampener diaphragms
How an Oteco wing-guided valve and full-open seat are matched to a mud pump by API 6 or API 7 series and spring, and how to choose a K-10 or K-20 dampener diaphragm in nitrile or HNBR. Includes the nitrogen-only pre-charge rule and what to send for a quote.
5 min read





