Oteco Double-Acting Mud Pump Pistons

Oteco Double-Acting Mud Pump Pistons: double-acting premium piston assemblies for duplex mud pumps, 3" to 8" liners, series A, B, K and L, with API 3 to 6 or GD1 taper bores — 82 part numbers by liner size, series and rod fit. Authorised Oteco distributor, UAE stock.
Key features
- Product type: Mud pump piston, double acting
- Model: Series A, B, K, L
- Sizes: 3" to 8" liners
- Fits: Duplex mud pumps (double-acting pistons), API-design
- Material / compound: Fabric-reinforced rubber or bonded polyurethane on a steel hub
- Product type
- Mud pump piston, double acting
- Model
- Series A, B, K, L
- Fits
- Duplex mud pumps (double-acting pistons), API-design
- Material / compound
- Fabric-reinforced rubber or bonded polyurethane on a steel hub
Product description
Double-acting premium piston assemblies for duplex mud pumps, 3" to 8" liners, series A, B, K and L, with API 3 to 6 or GD1 taper bores.
Oteco makes two piston constructions for triplex and duplex mud pumps:
- Premium pistons — rubbers with a multi-ply, fabric-reinforced backing that gives positive, wear-resistant seals with high tensile strength and resistance to chemicals, hydrocarbons and abrasion. Oteco states that they are fully interchangeable with other API-design pistons.
- Bonded urethane pistons — a harder, denser polyurethane bonded to the hub in place of fabric-backed rubber. They resist abrasive fluids, chemicals and oil-based muds of varying aniline point, and give long life in triplex pumps that have ample liner cooling water.
Choose the piston by the liner size (the piston OD), the series (hub size — see the table), and the rod fit: double-acting pistons are bored with an API taper (API 3 to 6) or a GD1 taper; single-acting pistons have a 1-inch or a 1-1/2-inch or 1-5/8-inch straight bore.
Oteco piston series
| Series | Snap ring | Retainer plate bore | Liner sizes listed |
|---|---|---|---|
| A | SR20 (2") | 2" | 2-3/4" to 5" |
| K | SR24 (2-1/2") | 2-1/2" | 3-1/2" to 4-1/2" |
| B | SR30 (3") | 3" | 4-1/2" to 7-3/4" |
| L | SR36 (3-3/4") | 3-3/4" | 5" to 9" |
Liner sizes are decoded from Oteco's part codes — I44 is a 4-1/2-inch piston (inches plus eighths), B the series and the last digits the taper or bore. We confirm the exact piston against your pump and rod before shipping.
Related listings
- Oteco single-acting and bonded urethane pistons
- Oteco piston rubbers and replacement kits
- Oteco piston hubs, plates and snap rings
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number, or the pump or swivel make and model and the liner size, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Product type | Mud pump piston, double acting |
| Model | Series A, B, K, L |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Sizes | 3" to 8" liners |
Compatibility
| Parameter | Value |
|---|---|
| Fits | Duplex mud pumps (double-acting pistons), API-design |
Construction
| Parameter | Value |
|---|---|
| Material / compound | Fabric-reinforced rubber or bonded polyurethane on a steel hub |
Shipping & lead time
Sizes & part numbers
82 sizes- Indus part no.IH-OTC-640045
- Description
- Premium piston assembly, double acting, series B, API 3 taper
- Fits
- 4-1/2" liner
- Indus part no.IH-OTC-640046
- Description
- Premium piston assembly, double acting, series B, API 4 taper
- Fits
- 4-1/2" liner
- Indus part no.IH-OTC-640047
- Description
- Premium piston assembly, double acting, series B, API 5 taper
- Fits
- 4-1/2" liner
- Indus part no.IH-OTC-640048
- Description
- Premium piston assembly, double acting, series B, API 3 taper
- Fits
- 4-3/4" liner
- Indus part no.IH-OTC-640049
- Description
- Premium piston assembly, double acting, series B, API 4 taper
- Fits
- 4-3/4" liner
- Indus part no.IH-OTC-640050
- Description
- Premium piston assembly, double acting, series B, API 5 taper
- Fits
- 4-3/4" liner
- Indus part no.IH-OTC-640051
- Description
- Premium piston assembly, double acting, series B, API 3 taper
- Fits
- 5" liner
- Indus part no.IH-OTC-640052
- Description
- Premium piston assembly, double acting, series B, API 4 taper
- Fits
- 5" liner
Show all 82 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. Fits — Model, size or equipment the maker lists the part or kit for. Ask us for the dimension drawing if you need it stamped.
What are Oteco double-acting mud pump pistons?▾
How do I read Oteco piston part IH-OTC-640045 and the I44 code?▾
Which Oteco piston series do I need for my liner size?▾
What API taper does a double-acting Oteco piston use: API 3, 4, 5, 6 or GD1?▾
Which Oteco series L piston fits a 7" or 8" liner?▾
What are Oteco premium pistons made of, and when is bonded urethane used?▾
What spares go with an Oteco double-acting piston?▾
How do I order the right Oteco piston for my pump and rod?▾
Which pumps use Oteco double-acting premium pistons?▾
What is the difference between double-acting and single-acting Oteco pistons?▾
Who makes the Oteco double-acting mud pump pistons?▾
How do I order an Oteco double-acting piston in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Drilling rig equipment
Mud pump pistons: double or single acting, series, liner size and urethane or rubber
A mud pump piston is chosen by liner size, hub series and rod fit, then by compound. How double-acting and single-acting pistons differ, what the series letters A, B, K and L mean, how to read an Oteco piston part number, and what to send for a quote.
6 min read
Drilling rig equipment
Mud pump valves, seats and pulsation dampener diaphragms
How an Oteco wing-guided valve and full-open seat are matched to a mud pump by API 6 or API 7 series and spring, and how to choose a K-10 or K-20 dampener diaphragm in nitrile or HNBR. Includes the nitrogen-only pre-charge rule and what to send for a quote.
5 min read
Drilling rig equipment
Oteco drilling and wellsite equipment: the range, and how to order it in the Middle East
Oteco Inc. of Houston makes the consumable and wear parts of a drilling rig: mud gate valves, relief valves, gauges, pump pistons, float valves, wipers, BOP rubbers and more. A guide to the range by family, how to identify a part, and how to order it from an authorised Oteco distributor in the UAE.
6 min read





