Oteco Pulsation Dampener Diaphragms & Parts — K-10, K-20

Oteco replacement diaphragms and parts for Hydril and Mattco K-10 and K-20 pulsation dampeners — NBR 5,000 psi (K-10, K-20) and HNBR 7,500 psi (K-20) diaphragms, stabilizers, plates, gauge, charging valve, gaskets — plus the Continental Emsco PD-55 diaphragm. 15 part numbers. Authorised Oteco distributor, UAE stock.
Key features
- Product type: Pulsation dampener diaphragm and parts
- Model: K-10, K-20
- Sizes: 10 and 20 gallon
- Fits: Hydril and Mattco K-10 and K-20; Continental Emsco PD-55
- Material / compound: Nitrile (NBR) or hydrogenated nitrile (HNBR)
- Product type
- Pulsation dampener diaphragm and parts
- Model
- K-10, K-20
- Fits
- Hydril and Mattco K-10 and K-20; Continental Emsco PD-55
- Material / compound
- Nitrile (NBR) or hydrogenated nitrile (HNBR)
Product description
Oteco makes most replacement parts for Hydril and Mattco K-10 (10 gallon) and K-20 (20 gallon) pulsation dampeners on the mud pump discharge. Diaphragms are moulded in one piece down to the bottom flange, with a metal insert moulded into the bottom so the rubber cannot extrude into the bottom-flange connection. Oteco makes diaphragms for 1,500, 3,000, 5,000 and 7,500 psi service. The part numbers listed here are nitrile (NBR) diaphragms to 5,000 psi for the K-10 and K-20, and a hydrogenated nitrile (HNBR) diaphragm to 7,500 psi for the K-20. The stabilizer, stabilizer plate, screw and lock washer are needed only for the 1,500 psi range.
The size table also lists the 316 stainless 0–6,000 psi gauge, the brass charging valve with bull plug, the bottom plate gasket, the K-20 bottom plate (4-1/16 in 5,000 psi, R-39) and a diaphragm for the Continental Emsco PD-55 dampener.
Pre-charge the dampener with nitrogen only, to the pressure the pump maker specifies for the operating pressure; never use air or oxygen.
Pump and swivel makers' names are trademarks of their owners. Oteco parts are replacement parts made to fit that equipment; Indus Hydraulics is not affiliated with those makers.
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number, or the pump or swivel make and model and the liner size, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Product type | Pulsation dampener diaphragm and parts |
| Model | K-10, K-20 |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Sizes | 10 and 20 gallon |
Compatibility
| Parameter | Value |
|---|---|
| Fits | Hydril and Mattco K-10 and K-20; Continental Emsco PD-55 |
Construction
| Parameter | Value |
|---|---|
| Material / compound | Nitrile (NBR) or hydrogenated nitrile (HNBR) |
Performance
| Parameter | Value |
|---|---|
| Rating | 1,500 to 7,500 psi |
Shipping & lead time
Sizes & part numbers
15 sizes- Indus part no.IH-OTC-123754
- Description
- Bottom plate, 4-1/16" 5,000 psi R-39
- Fits
- K-20
- Indus part no.IH-OTC-230010
- Description
- Diaphragm, nitrile (NBR), 0–5,000 psi
- Fits
- Hydril / Mattco K-20 (20 gallon)
- Indus part no.IH-OTC-230012
- Description
- Diaphragm, hydrogenated nitrile (HNBR), 0–7,500 psi
- Fits
- Hydril / Mattco K-20 (20 gallon)
- Indus part no.IH-OTC-230020
- Description
- Diaphragm stabilizer, nitrile (NBR) — optional for 1,500 psi range
- Fits
- K-20
- Indus part no.IH-OTC-230030
- Description
- Stabilizer plate — optional for 1,500 psi range
- Fits
- K-10 and K-20
- Indus part no.IH-OTC-230040
- Description
- Screw — optional for 1,500 psi range
- Fits
- K-20
- Indus part no.IH-OTC-230050
- Description
- Lock washer — optional for 1,500 psi range
- Fits
- K-20
- Indus part no.IH-OTC-230060
- Description
- Pressure gauge, 0–6,000 psi, 316 stainless
- Fits
- K-10 and K-20
Show all 15 sizesShow fewer sizes
- Indus part no.IH-OTC-230070
- Description
- Charging valve with bull plug, brass
- Fits
- K-10 and K-20
- Indus part no.IH-OTC-230080
- Description
- Bottom plate gasket
- Fits
- K-10 and K-20
- Indus part no.IH-OTC-230085
- Description
- Diaphragm
- Fits
- Continental Emsco PD-55 pulsation dampener
- Indus part no.IH-OTC-230110
- Description
- Diaphragm, nitrile (NBR), 0–5,000 psi
- Fits
- Hydril / Mattco K-10 (10 gallon)
- Indus part no.IH-OTC-230120
- Description
- Diaphragm stabilizer, nitrile (NBR) — optional for 1,500 psi range
- Fits
- K-10
- Indus part no.IH-OTC-230140
- Description
- Screw — optional for 1,500 psi range
- Fits
- K-10
- Indus part no.IH-OTC-230150
- Description
- Lock washer — optional for 1,500 psi range
- Fits
- K-10
Description — What this part number is, as the manufacturer lists it. Fits — Model, size or equipment the maker lists the part or kit for. Ask us for the dimension drawing if you need it stamped.
What are Oteco pulsation dampener diaphragms and parts?▾
How do I read the Oteco dampener part numbers IH-OTC-230010 and IH-OTC-230110?▾
Which Oteco diaphragm fits a K-10 and which fits a K-20 dampener?▾
Which Oteco dampener diaphragm do I choose for my working pressure?▾
What pressure ratings do Oteco K-10 and K-20 diaphragms have?▾
Should I choose an NBR or HNBR Oteco dampener diaphragm?▾
What other Oteco parts go with a K-20 dampener diaphragm?▾
How should an Oteco K-20 dampener be pre-charged?▾
Where is an Oteco dampener diaphragm used?▾
What is the difference between the K-10 and K-20 parts in this Oteco listing?▾
Who makes the Oteco pulsation dampener diaphragms and parts?▾
How do I order an Oteco dampener diaphragm in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog





