Metric Male 24° Cone (Light Series) Hose Fitting
Straight hose fitting with male 24° cone — DIN 2353 / ISO 8434-1 light series, for direct connection to DIN tube ports. straight, Metric (24° cone — DIN 2353 light series), 24° cone (compression on tube).
Key features
- Fitting Configuration: straight
- Thread Form: Metric (24° cone — DIN 2353 light series)
- Sealing Form: 24° cone (compression on tube)
- Nominal Size Range: DN6 – DN42 (light series)
- Fitting Configuration
- straight
- Thread Form
- Metric (24° cone — DIN 2353 light series)
- Sealing Form
- 24° cone (compression on tube)
- Nominal Size Range
- DN6 – DN42 (light series)
Product description
The Metric Male 24° Cone (Light Series) Hose Fitting is a straight hydraulic hose fitting in the DIN family — male thread with 24° cone (compression on tube) sealing form. Compliant with DIN 2353, ISO 8434-1.
Construction
- Configuration: straight
- Thread form: Metric (24° cone — DIN 2353 light series)
- Sealing form: 24° cone (compression on tube)
- Gender: male
- Series: light-series
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Tested to manufacturer-recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Applicable Standards
- DIN 2353
- ISO 8434-1
How to order
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule (see the Crimp Ferrules category), and (c) the thread size you need. Indus crimps and pressure-tests the assembly before dispatch.
Companion products
Pair with Indus crimp ferrules from the matching hose grade. For other thread families see the Metric, BSP, JIC 37°, DIN, and Japanese sub-categories under Hose Fittings.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | Metric (24° cone — DIN 2353 light series) |
| Sealing Form | 24° cone (compression on tube) |
| Thread Gender | male |
| Series | light-series |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | DN6 – DN42 (light series) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 2353, ISO 8434-1 |
Shipping & lead time
Sizes & part numbers
18 sizes| Indus part no. | Hose bore | Thread | Tube O.D. (mm) | S1 (mm) | A (mm) | C (mm) |
|---|---|---|---|---|---|---|
| IH-DF-MAL-24-LS-0412 | -04 · 1/4" · DN6 | M12×1.5 | 6 | 12 | 20.5 | 10 |
| IH-DF-MAL-24-LS-0414 | -04 · 1/4" · DN6 | M14×1.5 | 8 | 14 | 20.5 | 10 |
| IH-DF-MAL-24-LS-0416 | -04 · 1/4" · DN6 | M16×1.5 | 10 | 17 | 22.5 | 11 |
| IH-DF-MAL-24-LS-0514 | -05 · 5/16" · DN8 | M14×1.5 | 8 | 14 | 21.5 | 10 |
| IH-DF-MAL-24-LS-0516 | -05 · 5/16" · DN8 | M16×1.5 | 10 | 17 | 22.5 | 11 |
| IH-DF-MAL-24-LS-0518 | -05 · 5/16" · DN8 | M18×1.5 | 12 | 19 | 23.5 | 11 |
| IH-DF-MAL-24-LS-0616 | -06 · 3/8" · DN10 | M16×1.5 | 10 | 17 | 22.5 | 11 |
| IH-DF-MAL-24-LS-0618 | -06 · 3/8" · DN10 | M18×1.5 | 12 | 19 | 21.5 | 11 |
| IH-DF-MAL-24-LS-0622 | -06 · 3/8" · DN10 | M22×1.5 | 15 | 24 | 24.5 | 12 |
| IH-DF-MAL-24-LS-0822 | -08 · 1/2" · DN12 | M22×1.5 | 15 | 24 | 26 | 12 |
| IH-DF-MAL-24-LS-0826 | -08 · 1/2" · DN12 | M26×1.5 | 18 | 27 | 26.5 | 12 |
| IH-DF-MAL-24-LS-1026 | -10 · 5/8" · DN16 | M26×1.5 | 18 | 27 | 27 | 12 |
| IH-DF-MAL-24-LS-1027 | -10 · 5/8" · DN16 | M27×1.5 | 18 | 30 | 32 | 14 |
| IH-DF-MAL-24-LS-1030 | -10 · 5/8" · DN16 | M30×2 | 22 | 32 | 29 | 14 |
| IH-DF-MAL-24-LS-1230 | -12 · 3/4" · DN20 | M30×2 | 22 | 32 | 29 | 14 |
| IH-DF-MAL-24-LS-1636 | -16 · 1" · DN25 | M36×2 | 28 | 38 | 31.5 | 14 |
| IH-DF-MAL-24-LS-2045 | -20 · 1.1/4" · DN32 | M45×2 | 35 | 46 | 36 | 16 |
| IH-DF-MAL-24-LS-2452 | -24 · 1.1/2" · DN40 | M52×2 | 42 | 55 | 38 | 16 |
Tube O.D. — Outside diameter of the tube the port is cut for. S1 — Dimension S1 on the manufacturer dimension drawing. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What thread family does this fitting use?▾
What thread sizes are available?▾
What is the sealing form?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Which crimp ferrule should I pair with this fitting?▾
Is crimping included?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- gerade metrisch Außengewinde 24° Konus Schlaucharmatur
- fr
- mâle métrique cône 24° embout de flexible – série L
- es
- macho métrica cono 24° racor de manguera – serie L
- it
- maschio metrica cono 24° raccordo per tubo flessibile – serie L
Engineers viewing this also looked at
Retaining Nut, DIN 3870 Heavy Series
Retaining Nut, DIN 3870 Light Series
Cutting Ring, DIN 3861 Heavy Series
Cutting Ring, DIN 3861 Light Series
Metric Standpipe Tube Fitting (DIN 2353)
45° Metric Standpipe Tube Fitting (DIN 2353)
90° Metric Standpipe Tube Fitting (DIN 2353)
