Rexroth CDT3 Tie-Rod Cylinder 63/45 × 200 mm, Clevis Mounting MP1 (ISO 6020-2)
Category image · Hydraulic CylindersBosch Rexroth CDT3 tie-rod differential cylinder to ISO 6020-2: 63 mm piston, 45 mm rod, 200 mm stroke, MP1 clevis mounting. Rated 160 bar nominal; 210 bar maximum for static loads only.
Key features
- Bore: 63 mm
- Stroke: 200 mm
Product description
A Bosch Rexroth CDT3 tie-rod differential cylinder, 63 mm piston and 45 mm rod, 200 mm stroke. CDT3 is Rexroth's tie-rod series with installation dimensions to ISO 6020-2, so it is interchangeable with other ISO 6020-2 cylinders of the same size and mounting. Rexroth offers it in 13 mounting types, pistons from 25 to 200 mm and strokes up to 3000 mm, with an integrated guide socket for quicker maintenance, optional end cushioning and a patented safety bleed.
Rexroth rates the CDT3 160 bar nominal, and 210 bar maximum only for static loads — fewer than 10,000 load cycles; for dynamic loads the limit is 75 % of that.
This size
- Piston 63 mm; rods offered: 28, 36 or 45 mm
- Stroke 200 mm; maximum available 1400 mm, subject to a buckling check
- Mounting: MP1, clevis at the base (MP5 for a self-aligning clevis, MP3 for a swivel eye)
- Theoretical force at 160 bar: 49.9 kN push, 24.4 kN pull
- Line connections: G1/2 standard, G3/4 enlarged
- Maximum stroke velocity: 0.50 m/s with standard ports, 0.70 m/s enlarged
- Weight: about 10.2 kg at 200 mm stroke (8.0 kg at 100 mm plus 2.2 kg per 100 mm more, MP1)
- Test pressure: 240 bar (static)
The type code
Rexroth's code starts CDT3MP1/63/45/200Z3X/…: CD differential cylinder, T3 tie-rod series, the mounting, piston, rod and stroke, Z for tie-rod design and 3X for the component series. The rest specifies the line connections, rod end, cushioning, seals and rod finish. The code this page carried was not a Rexroth code; give the full code from your cylinder's nameplate, or the options you need, on the RFQ.
Seals and fluid
Rexroth offers seal system M as standard (HL, HLP and HFA fluids), T for servo quality and low friction (also HFC), and S for HFDR phosphate ester and up to +120 °C. It does not publish the elastomers. With seal system M on mineral oil the fluid may run from −20 to +80 °C. Rexroth asks for ISO 4406 20/18/15 cleanliness or better, and at least 10 bar operating pressure with no load.
Ordering
Send the full type code or the options on your RFQ. We supply new cylinders and confirm lead time on the quotation.
Dimensions
| Parameter | Value |
|---|---|
| Bore | 63 mm |
| Rod diameter | 45 mm |
| Stroke | 200 mm |
Mechanical
| Parameter | Value |
|---|---|
| Mount style | MP1, clevis at the base (MP5 for a self-aligning clevis, MP3 for a swivel eye) |
| Seal material | Seal system M (standard), T or S |
| Line connections | G1/2 standard, G3/4 enlarged |
Performance
| Parameter | Value |
|---|---|
| Push force | 49.9 kN |
| Nominal pressure | 160 bar |
| Maximum operating pressure | 210 bar, static loads only |
Identification
| Parameter | Value |
|---|---|
| Series | Rexroth CDT3, ISO 6020-2 |
Shipping & lead time
What is the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) and where is it used?▾
How do I read the Rexroth type code of the Rexroth CDT3 63/45 × 200 mm cylinder (MP1), CDT3MP1/63/45/200Z3X?▾
Which rod diameters and strokes are offered on the Rexroth CDT3 63/45 × 200 mm cylinder (MP1)?▾
How much force does the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) give?▾
What pressure is the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) rated for?▾
Which seals and fluids does the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) take?▾
What standard does the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) follow, and is it interchangeable?▾
What line connections and speed does the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) have?▾
Which mounting does the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) have and what are the alternatives?▾
How do I check the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) for buckling at full stroke?▾
How does the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) differ from the Rexroth CDT3 100/70 × 500 cylinder (MS2)?▾
Can I buy the Rexroth CDT3 63/45 × 200 mm cylinder (MP1) from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Cylinders, pumps & motors
Welded vs tie-rod hydraulic cylinders: construction, pressure, repair and which to buy
A tie-rod cylinder is bolted together and comes apart on a bench; a welded cylinder is a sealed tube that is smaller, tougher and harder to rebuild. How each is built, the standards behind them, where each one wins on mobile and industrial equipment, and how to tell which one you have.
12 min read
Cylinders, pumps & motors
Hydraulic cylinder mounting styles: clevis, cross tube, trunnion, flange and the codes that name them
The mount decides whether a cylinder pushes straight or bends itself to death. Welded mounts — clevis, cross tube, tang, pin eye, swivel eye — the NFPA and ISO codes for tie-rod mounts, what an ASAE or “ag” cylinder is, and how to measure pins, gaps and closed length so a replacement fits first time.
8 min read
