Gin Block and Roofers Block — 1,000 lbs WLL

Gin Block and Roofers Block, in 3 sizes, 10″ to 14″, WLL 1,000 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Gin Block and Roofers Block
- Size range: 10″ to 14″
- Working load limit: 1,000 lbs
- Size range
- 10″ to 14″
- Working load limit
- 1,000 lbs
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull.
Sizes and ratings
3 sizes, 10″ to 14″. Working load limit 1,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Gin Block and Roofers Block |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 10″ to 14″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1,000 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-LR-BP-GBRB-1000
- Size
- 10″
- Rope size
- 1″
- WLL (lbs)
- 1,000
- Indus part no.IH-LR-BP-GBRB-1200
- Size
- 12″
- Rope size
- 1″
- WLL (lbs)
- 1,000
- Indus part no.IH-LR-BP-GBRB-1400
- Size
- 14″
- Rope size
- 1″
- WLL (lbs)
- 1,000
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Gin Block and Roofers Block and what is it used for?▾
What sizes does the Gin Block and Roofers Block come in?▾
How do I size the Gin Block and Roofers Block for a job?▾
What WLL does the Gin Block and Roofers Block carry?▾
What part number do I quote for the Gin Block and Roofers Block?▾
How does the Gin Block and Roofers Block compare with the Blue Tackle Pulley and Block?▾
What is the Gin Block and Roofers Block made of?▾
What standard and certificate come with the Gin Block and Roofers Block?▾
What can the Gin Block and Roofers Block be connected to?▾
How do I inspect the Gin Block and Roofers Block before use?▾
Where is the Gin Block and Roofers Block typically used?▾
Can I buy the Gin Block and Roofers Block from Indus ex-stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read







