Galvanized Malleable Iron Block with Eye Single Sheave — 0.2–1.8 t WLL

Galvanized Malleable Iron Block with Eye Single Sheave, in 4 sizes, 3″ to 9″, WLL 0.2 to 1.8 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Galvanized Malleable Iron Block with Eye Single Sheave
- Size range: 3″ to 9″
- Working load limit: 0.2 to 1.8 t
- Size range
- 3″ to 9″
- Working load limit
- 0.2 to 1.8 t
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull.
Sizes and ratings
4 sizes, 3″ to 9″. Working load limit 0.2 to 1.8 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Galvanized Malleable Iron Block with Eye Single Sheave |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3″ to 9″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.2 to 1.8 t |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-LR-BP-GMIBESS-300
- Size
- 3″
- WLL (t)
- 0.2
- A (mm)
- 172
- B (mm)
- 42
- C (mm)
- 30
- D (mm)
- 12
- E (mm)
- 22.5
- F (mm)
- 58
- G (mm)
- 15.5
- Indus part no.IH-LR-BP-GMIBESS-400
- Size
- 4″
- WLL (t)
- 0.4
- A (mm)
- 230
- B (mm)
- 57.5
- C (mm)
- 35
- D (mm)
- 17.5
- E (mm)
- 35.5
- F (mm)
- 78
- G (mm)
- 21.5
- Indus part no.IH-LR-BP-GMIBESS-600
- Size
- 6″
- WLL (t)
- 1
- A (mm)
- 345
- B (mm)
- 100
- C (mm)
- 49
- D (mm)
- 27
- E (mm)
- 52.5
- F (mm)
- 116.5
- G (mm)
- 33
- Indus part no.IH-LR-BP-GMIBESS-900
- Size
- 9″
- WLL (t)
- 1.8
- A (mm)
- 485
- B (mm)
- 175
- C (mm)
- 64
- D (mm)
- 40.5
- E (mm)
- 69
- F (mm)
- 200
- G (mm)
- 36
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Galvanized Malleable Iron Block with Eye Single Sheave used for?▾
What sizes does the Galvanized Malleable Iron Block with Eye Single Sheave come in?▾
How do I size the Galvanized Malleable Iron Block with Eye Single Sheave for a job?▾
What WLL does the Galvanized Malleable Iron Block with Eye Single Sheave carry?▾
What part number do I quote for the Galvanized Malleable Iron Block with Eye Single Sheave?▾
When should I choose the Galvanized Malleable Iron Block with Eye Single Sheave instead of the Galvanized Malleable Iron Block Oval Eye with Double Sheave?▾
What material and finish does the Galvanized Malleable Iron Block with Eye Single Sheave have?▾
Which standard does the Galvanized Malleable Iron Block with Eye Single Sheave meet?▾
What can the Galvanized Malleable Iron Block with Eye Single Sheave be connected to?▾
How do I inspect the Galvanized Malleable Iron Block with Eye Single Sheave before use?▾
Where is the Galvanized Malleable Iron Block with Eye Single Sheave typically used?▾
Does Indus stock the Galvanized Malleable Iron Block with Eye Single Sheave in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read







