Galvanized Malleable Iron Block — 0.2–3.5 t WLL

Galvanized Malleable Iron Block, in 12 sizes, 3″ to 10″, WLL 0.2 to 3.5 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Galvanized Malleable Iron Block
- Size range: 3″ to 10″
- Working load limit: 0.2 to 3.5 t
- Size range
- 3″ to 10″
- Working load limit
- 0.2 to 3.5 t
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull.
Sizes and ratings
12 sizes, 3″ to 10″. Working load limit 0.2 to 3.5 t. Available as: single sheave, swivel hook, double sheave, swivel. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Galvanized Malleable Iron Block |
| Sizes | 12 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3″ to 10″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.2 to 3.5 t |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
12 sizes- Indus part no.IH-LR-BP-GMIB-300-SSSH
- Size
- 3″
- Type
- Single sheave, swivel hook
- Rope size
- 12 mm
- WLL (t)
- 0.2
- A (mm)
- 194
- B (mm)
- 45
- C (mm)
- 29
- F (mm)
- 16
- Weight (kg)
- 0.931
- Indus part no.IH-LR-BP-GMIB-400-SSSH
- Size
- 4″
- Type
- Single sheave, swivel hook
- Rope size
- 16 mm
- WLL (t)
- 0.4
- A (mm)
- 248
- B (mm)
- 60
- C (mm)
- 32
- F (mm)
- 27
- Weight (kg)
- 1.747
- Indus part no.IH-LR-BP-GMIB-500-SSSH
- Size
- 5″
- Type
- Single sheave, swivel hook
- Rope size
- 18 mm
- WLL (t)
- 0.5
- A (mm)
- 305
- B (mm)
- 83
- C (mm)
- 38
- F (mm)
- 32
- Weight (kg)
- 2.692
- Indus part no.IH-LR-BP-GMIB-600-SSSH
- Size
- 6″
- Type
- Single sheave, swivel hook
- Rope size
- 24 mm
- WLL (t)
- 1
- A (mm)
- 356
- B (mm)
- 92
- C (mm)
- 51
- F (mm)
- 32
- Weight (kg)
- 4
- Indus part no.IH-LR-BP-GMIB-800-SSSH
- Size
- 8″
- Type
- Single sheave, swivel hook
- Rope size
- 28 mm
- WLL (t)
- 1.2
- A (mm)
- 400
- B (mm)
- 137
- C (mm)
- 56
- F (mm)
- 32
- Weight (kg)
- 6
- Indus part no.IH-LR-BP-GMIB-1000-SSSH
- Size
- 10″
- Type
- Single sheave, swivel hook
- Rope size
- 32 mm
- WLL (t)
- 1.8
- A (mm)
- 486
- B (mm)
- 178
- C (mm)
- 60
- F (mm)
- 48
- Weight (kg)
- 13
- Indus part no.IH-LR-BP-GMIB-300-DSS
- Size
- 3″
- Type
- Double sheave, swivel
- Rope size
- 12mm
- WLL (t)
- 0.4
- A (mm)
- 194
- B (mm)
- 45
- C (mm)
- 49
- F (mm)
- 16
- Weight (kg)
- 1.165
- Indus part no.IH-LR-BP-GMIB-400-DSS
- Size
- 4″
- Type
- Double sheave, swivel
- Rope size
- 16mm
- WLL (t)
- 0.9
- A (mm)
- 248
- B (mm)
- 60
- C (mm)
- 56
- F (mm)
- 27
- Weight (kg)
- 2.416
Show all 12 sizesShow fewer sizes
- Indus part no.IH-LR-BP-GMIB-500-DSS
- Size
- 5″
- Type
- Double sheave, swivel
- Rope size
- 18mm
- WLL (t)
- 1.1
- A (mm)
- 305
- B (mm)
- 83
- C (mm)
- 67
- F (mm)
- 32
- Weight (kg)
- 3.3
- Indus part no.IH-LR-BP-GMIB-600-DSS
- Size
- 6″
- Type
- Double sheave, swivel
- Rope size
- 24mm
- WLL (t)
- 2
- A (mm)
- 356
- B (mm)
- 92
- C (mm)
- 89
- F (mm)
- 32
- Weight (kg)
- 5.8
- Indus part no.IH-LR-BP-GMIB-800-DSS
- Size
- 8″
- Type
- Double sheave, swivel
- Rope size
- 28mm
- WLL (t)
- 2.6
- A (mm)
- 400
- B (mm)
- 137
- C (mm)
- 100
- F (mm)
- 32
- Weight (kg)
- 9
- Indus part no.IH-LR-BP-GMIB-1000-DSS
- Size
- 10″
- Type
- Double sheave, swivel
- Rope size
- 32mm
- WLL (t)
- 3.5
- A (mm)
- 486
- B (mm)
- 178
- C (mm)
- 108
- F (mm)
- 48
- Weight (kg)
- 23
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Galvanized Malleable Iron Block and what is it used for?▾
Which sizes of Galvanized Malleable Iron Block are available?▾
How do I size the Galvanized Malleable Iron Block for a job?▾
What WLL does the Galvanized Malleable Iron Block carry?▾
How do I order a specific size of the Galvanized Malleable Iron Block?▾
When should I choose the Galvanized Malleable Iron Block instead of the Malleable Iron Shell Block?▾
What is the Galvanized Malleable Iron Block made of?▾
Which standard does the Galvanized Malleable Iron Block meet?▾
What can the Galvanized Malleable Iron Block be connected to?▾
How should the Galvanized Malleable Iron Block be inspected and used?▾
What are the typical applications of the Galvanized Malleable Iron Block?▾
Can I buy the Galvanized Malleable Iron Block from Indus ex-stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read







