Galvanized Plough/CQR Anchor

Galvanized Plough/CQR Anchor, in 5 sizes, 5 kg to 16 kg. Load rating on request. Indus part numbers.
Key features
- Product type: Galvanized Plough/CQR Anchor
- Size range: 5 kg to 16 kg
- Size range
- 5 kg to 16 kg
- Material
- Galvanized steel
- Finish
- Hot dipped galvanized
Product description
Marine anchors for vessels, buoys and moorings. Galvanized steel, hot dipped galvanized.
Sizes
5 sizes, 5 kg to 16 kg. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Cast.
Choosing a size
Specify the anchor by type and weight, and state any classification society certificate the vessel needs.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Galvanized Plough/CQR Anchor |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5 kg to 16 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Galvanized steel |
| Finish | Hot dipped galvanized |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-LR-AN-GPCQRA-5KG
- Size
- 5 kg
- A (mm)
- 455
- B (mm)
- 210
- C (mm)
- 320
- F (mm)
- 200
- Weight (kg)
- 5
- Indus part no.IH-LR-AN-GPCQRA-7KG
- Size
- 7 kg
- A (mm)
- 500
- B (mm)
- 235
- C (mm)
- 325
- F (mm)
- 200
- Weight (kg)
- 7
- Indus part no.IH-LR-AN-GPCQRA-9KG
- Size
- 9 kg
- A (mm)
- 605
- B (mm)
- 235
- C (mm)
- 390
- F (mm)
- 225
- Weight (kg)
- 9
- Indus part no.IH-LR-AN-GPCQRA-12KG
- Size
- 12 kg
- A (mm)
- 655
- B (mm)
- 285
- C (mm)
- 410
- F (mm)
- 315
- Weight (kg)
- 12
- Indus part no.IH-LR-AN-GPCQRA-16KG
- Size
- 16 kg
- A (mm)
- 740
- B (mm)
- 320
- C (mm)
- 450
- F (mm)
- 325
- Weight (kg)
- 16
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the galvanized plough (CQR) anchor and what sizes does it come in?▾
How do I read the Indus part number on the galvanized plough (CQR) anchor?▾
Which sizes does the galvanized plough (CQR) anchor come in?▾
How do I choose the mass of the galvanized plough (CQR) anchor?▾
What holding power or proof load does the galvanized plough (CQR) anchor have?▾
What is the galvanized plough (CQR) anchor made from?▾
Which standard or certificate applies to the galvanized plough (CQR) anchor?▾
What anchor chain and shackles go with the galvanized plough (CQR) anchor?▾
What should I check before supplying a galvanized plough (CQR) anchor?▾
Where is the galvanized plough (CQR) anchor used?▾
Galvanized plough anchor compared with the lightweight fluke anchor?▾
Do you stock the galvanized plough (CQR) anchor, and how do I request a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Types of marine anchors: stockless, Hall, Pool, HHP, Admiralty, fluke, claw and offshore drag anchors
Ship anchors, small-craft anchors and offshore mooring anchors are different families with different jobs. The anchor types we list, how each one holds, the mass ranges available and what to specify when ordering one.
7 min read
Anchor chain & mooring
Equipment number: how a ship’s anchors and anchor chain are sized
Classification rules size a ship’s anchors and chain from a single figure, the equipment number. What it represents, how to read the equipment table to find anchor mass, total chain length and chain diameter in each grade, and why a high-holding-power anchor and a higher chain grade change the answer.
5 min read
Anchor chain & mooring
Anchor proof load testing: test loads by anchor mass, and why HHP anchors are tested harder
Every ship’s anchor is proof loaded before it is certified, to a load set by its mass. The proof test load for anchors from 50 kg to 48 tonnes, how high-holding-power anchors are treated, what the test proves, and what to check on the certificate.
4 min read








