Run Tee, Female NPT × Female NPT × Male NPT

Run Tee, Female NPT × Female NPT × Male NPT — NPT family run tee for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: run-tee
- Port A Thread: NPT taper 1/8" to 2"
- Port A Sealing: npt-taper
- Nominal Size Range: NPT 1/8" to 2"
- Max Working Pressure: up to 350 bar (5000 psi)
- Body Configuration
- run-tee
- Port A Thread
- NPT taper 1/8" to 2"
- Port A Sealing
- npt-taper
- Nominal Size Range
- NPT 1/8" to 2"
- Max Working Pressure
- up to 350 bar (5000 psi)
Product description
The Run Tee Connector f NPT X f NPT X m NPT is a Run tee hydraulic adapter in the NPT family. Run Tee Connector f NPT X f NPT X m NPT — NPT family run tee for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Run tee
- Port A: Female — NPT taper 1/8" to 2" (NPT taper thread (self-sealing))
- Port B: Female — NPT taper 1/8" to 2" (NPT taper thread (self-sealing))
- Additional ports: Third port: male NPT — NPT taper 1/8" to 2"
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
up to 350 bar (5000 psi). NPT family — ASME B1.20.1 — National Pipe Taper. 60° thread angle (NOT interchangeable with BSPT 55°). PTFE tape or anaerobic sealant required for hydraulic service.
Applicable Standards
- ASME B1.20.1
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | run-tee |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | NPT taper 1/8" to 2" |
| Port A Sealing | npt-taper |
| Port A Gender | female |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPT taper 1/8" to 2" |
| Port B Sealing | npt-taper |
| Port B Gender | female |
Port C
| Parameter | Value |
|---|---|
| Additional Ports | Third port: male NPT — NPT taper 1/8" to 2" |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | NPT 1/8" to 2" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 350 bar (5000 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ASME B1.20.1 |
Shipping & lead time
What is the Run Tee Connector f NPT X f NPT X m NPT used for and which ports does it connect?▾
What do I need to send to get a part number quote for the Run Tee Connector f NPT X f NPT X m NPT (SKU IH-AD-NPT-004)?▾
What sizes does the Run Tee Connector f NPT X f NPT X m NPT come in?▾
How do I choose the right Run Tee Connector f NPT X f NPT X m NPT for my port threads?▾
What is the working pressure of the Run Tee Connector f NPT X f NPT X m NPT?▾
What is the Run Tee Connector f NPT X f NPT X m NPT made from, and is it suitable for my fluid?▾
Which standards does the Run Tee Connector f NPT X f NPT X m NPT conform to, and can I get test certificates?▾
What mates with the Run Tee Connector f NPT X f NPT X m NPT, and which fittings do I pair it with?▾
How does the Run Tee Connector f NPT X f NPT X m NPT seal, and what should I check when fitting it?▾
How does the Run Tee Connector f NPT X f NPT X m NPT differ from the Branch Tee Connector f NPT X m NPT X f NPT?▾
Where is the Run Tee Connector f NPT X f NPT X m NPT made, and can you export it from Dubai?▾
Do you stock the Run Tee Connector f NPT X f NPT X m NPT in Dubai, and how do I get a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Buying fittings & adapters
NPT and NPSM hydraulic adapters: NPTF Dryseal, the 30° swivel seat, ratings — and weld-on adapters
NPT is the one hydraulic thread that seals on the thread, and Parker lists its limits plainly: poor dynamic sealing, ports that can crack, limited remakeability. Yet every pump, filter and gauge on an American machine has one. The steel NPT and NPSM range — nipples, elbows, tees, swivels, plugs and caps — with ratings by size (male and female differ), why an NPSM swivel needs a 30° seat, and the weld-on adapters that put a port on plate.
6 min read
Failure analysis
Using sealant on hydraulic threads: which joints want it, and which are ruined by it
Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.
3 min read
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read








