Stainless Steel Simplex Wire Rope Clip — M4–M8

Stainless Steel Simplex Wire Rope Clip, in 6 sizes, M4 to M8. Indus part numbers.
Key features
- Product type: Stainless Steel Simplex Wire Rope Clip
- Size range: M4 to M8
- Size range
- M4 to M8
- Material
- Stainless steel type 304 or 316 (A2 or A4)
- Finish
- Polished
Product description
Wire rope clips form an eye or join two ropes without a swaging press. Stainless steel type 304 or 316 (A2 or A4), polished.
Sizes
6 sizes, M4 to M8. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamped.
Choosing a size
Drop-forged clips are the ones used on lifting terminations; malleable clips are for guy lines and non-lifting duty. Fit the saddle on the live end, use the number of clips the maker specifies for the rope size, and re-torque after the first load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Simplex Wire Rope Clip |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M4 to M8 |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel type 304 or 316 (A2 or A4) |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-LR-WC-SSSWRC-M4
- Size
- M4
- Rope size
- 2 mm
- L (mm)
- 15
- Indus part no.IH-LR-WC-SSSWRC-M4-2
- Size
- M4
- Rope size
- 3 mm
- L (mm)
- 18
- Indus part no.IH-LR-WC-SSSWRC-M5
- Size
- M5
- Rope size
- 4 mm
- L (mm)
- 20
- Indus part no.IH-LR-WC-SSSWRC-M5-2
- Size
- M5
- Rope size
- 5 mm
- L (mm)
- 24
- Indus part no.IH-LR-WC-SSSWRC-M6
- Size
- M6
- Rope size
- 6 mm
- L (mm)
- 29
- Indus part no.IH-LR-WC-SSSWRC-M8
- Size
- M8
- Rope size
- 8 mm
- L (mm)
- 35
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Simplex Wire Rope Clip and where is it used?▾
How do I read Stainless Steel Simplex Wire Rope Clip part numbers such as IH-LR-WC-SSSWRC-M4?▾
Which sizes does the Stainless Steel Simplex Wire Rope Clip come in?▾
How should I pick the size of Stainless Steel Simplex Wire Rope Clip for my job?▾
What is the rated capacity of the Stainless Steel Simplex Wire Rope Clip?▾
What material and finish does the Stainless Steel Simplex Wire Rope Clip have?▾
What standard and certificate apply to the Stainless Steel Simplex Wire Rope Clip?▾
Which parts connect to the Stainless Steel Simplex Wire Rope Clip?▾
How do I install and check the Stainless Steel Simplex Wire Rope Clip?▾
How does the Stainless Steel Simplex Wire Rope Clip compare with the Stainless Steel Duplex Wire Rope Clip?▾
Do you ship the Stainless Steel Simplex Wire Rope Clip outside the UAE?▾
Is the Stainless Steel Simplex Wire Rope Clip available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle
- fr
- collier de serrage
- es
- abrazadera de manguera
- it
- fascetta stringitubo
From the blog
Written about this range
Lifting & rigging
How to install wire rope clips: which way round, how many, and how tight
A wire rope clip termination is only as good as its installation: the saddle on the live end, the right number of clips, the right length of turnback and the right torque, re-checked after the first load. Here are the published tables for US-type and DIN 1142 clips, and the one job clips must never do.
9 min read
Lifting & rigging
Wire rope construction explained: 6x19 vs 6x36 vs 6x37, and IWRC vs fibre core
A wire rope designation such as 6x36WS-IWRC 1770 B sZ tells you almost everything about how the rope will behave. The surprise is how little the construction changes its strength: at 12 mm, the common six-strand ropes break within about 12% of each other. What changes is flexibility, abrasion resistance and crush resistance.
8 min read







