BSP banjo eye for hose-end connection to a tapped BSP port via banjo bolt — typical of brake, fuel, and pilot lines. banjo, BSP eye (matched to banjo-bolt), Banjo washer (copper or aluminium).
The BSP Banjo Eye Fitting is a banjo hydraulic hose fitting in the BSP family — female thread with Banjo washer (copper or aluminium) sealing form. Compliant with ISO 228, BS 5200.
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Tested to manufacturer-recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule (see the Crimp Ferrules category), and (c) the thread size you need. Indus crimps and pressure-tests the assembly before dispatch.
Pair with Indus crimp ferrules from the matching hose grade. For other thread families see the Metric, BSP, JIC 37°, DIN, and Japanese sub-categories under Hose Fittings.
| Parameter | Value |
|---|---|
| Fitting Configuration | banjo |
| Thread Form | BSP eye (matched to banjo-bolt) |
| Sealing Form | Banjo washer (copper or aluminium) |
| Thread Gender | female |
| Parameter | Value |
|---|---|
| Nominal Size Range | G1/8 – G3/4 (to match banjo bolt) |
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228, BS 5200 |