Enerpac CULP Series Hydraulic Cylinder

Enerpac CULP Series Hydraulic Cylinder: 5 part numbers.
Product description
Enerpac CULP Series Hydraulic Cylinder: 5 part numbers.
Specification
- Type: Hydraulic Cylinder
- Material: Steel
- Single Acting/double Acting: Single Acting
- Part numbers: 5
Sizes and part numbers
The Sizes & Part Numbers tab lists every Enerpac part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing a cylinder
Choose capacity with margin over the working load, and stroke for the full travel needed. High-pressure tooling cylinders run at up to 700 bar (10,000 psi) and need a matching pump, hose and gauge rated for that pressure.
How to order
Quote the Enerpac part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Body Material | Steel |
| Cylinder Type | Low Profile |
| Finish | Nitride |
| Material | Steel |
| Plunger Type | Solid |
| Return Type | Single-Acting, Load Return |
| Single Acting/double Acting | Single Acting |
| Surface Treatment | Nitride |
Shipping & lead time
Sizes & part numbers
5 sizes- Enerpac part no.CULP20
- Description
- Ultra Flat Hydraulic Cylinder With Stop Ring, 20 Ton
- Retracted (in)
- 1.26
- Extended (in)
- 1.5
- Action
- Single Acting
- Enerpac part no.CULP30
- Description
- Ultra Flat Hydraulic Cylinder With Stop Ring, 30 Ton
- Retracted (in)
- 1.38
- Extended (in)
- 1.6
- Action
- Single Acting
- Enerpac part no.CULP100
- Description
- Ultra Flat Hydraulic Cylinder With Stop Ring, 100 Ton
- Retracted (in)
- 2.55
- Extended (in)
- 2.8
- Action
- Single Acting
- Enerpac part no.CULP50
- Description
- Ultra Flat Hydraulic Cylinder With Stop Ring, 50 Ton
- Retracted (in)
- 1.75
- Extended (in)
- 2
- Action
- Single Acting
- Enerpac part no.CULP10
- Description
- Ultra Flat Hydraulic Cylinder With Stop Ring, 10 Ton
- Retracted (in)
- 1.08
- Extended (in)
- 1.3
- Action
- Single Acting
Description — What this part number is, as the manufacturer lists it. Retracted — Length with the rod retracted, as published. Extended — Length with the rod extended, as published. Action — Single- or double-acting, as published. Ask us for the dimension drawing if you need it stamped.
Where and how is the Enerpac CULP series hydraulic cylinder used?▾
Which models is listed for the Enerpac CULP series hydraulic cylinder?▾
How do I choose the right size or model of the Enerpac CULP series hydraulic cylinder?▾
What working pressure applies to the Enerpac CULP series hydraulic cylinder?▾
Which materials is the Enerpac CULP series hydraulic cylinder offered in?▾
Which standards apply to the Enerpac CULP series hydraulic cylinder?▾
What does the Enerpac CULP series hydraulic cylinder connect to?▾
How should the Enerpac CULP series hydraulic cylinder be installed and maintained?▾
Where is the Enerpac CULP series hydraulic cylinder used?▾
How does the Enerpac CULP series hydraulic cylinder differ from the Enerpac CUSP series hydraulic cylinder?▾
Where are the Enerpac CULP series hydraulic cylinder shipped from, and what origin and HS code apply?▾
Is the Enerpac CULP series hydraulic cylinder available from stock in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Cylinders, pumps & motors
10,000 psi hydraulic cylinders and pumps: choosing, matching and using a 700 bar system safely
Jacking, pressing, pulling and bolting tools run at 10,000 psi, where a small cylinder lifts tens of tonnes and a mistake is measured in crushed hands. Single and double-acting, hollow plunger, low-height, lock-nut and aluminium cylinders; hand, air and electric pumps; matching oil volume; and the rules that keep a 700 bar lift safe.
10 min read
Instrumentation & gauges
10,000 psi hydraulic gauges: pressure, force and digital gauges for jacking, pressing and bolting
On a 700 bar jacking or bolting system the gauge is the only way to know the load, and the only warning before something gives. 10,000 psi analogue gauges, force gauges that read tonnes directly for a given cylinder, digital gauges, gauge adaptors and snubber valves — and how to fit and read them safely.
6 min read
Cylinders, pumps & motors
Why a hydraulic cylinder drifts: piston seal, valve or oil — and how to test which
A boom that sinks overnight is blamed on the cylinder far more often than the cylinder deserves. Why piston-seal bypass alone rarely drops a load, the valve leakage and thermal contraction that usually do, a safe step-by-step test, and how to read external leaks, scored rods and blown seals.
10 min read




