Aeroquip FJ3052 Series Male O-Ring Hose Fittings

Aeroquip FJ3052 Series Male O-Ring Hose Fittings in steel, 0.31" to 0.63": 6 part numbers.
Product description
Aeroquip FJ3052 Series Male O-Ring Hose Fittings in steel, 0.31" to 0.63": 6 part numbers.
Specification
- Type: Male O-Ring Hose Fitting
- Material: Steel
- Size range: 0.31" to 0.63"
- Pressure stated by the maker: 500 psi (34 bar)
- Part numbers: 6
Sizes and part numbers
The Sizes & Part Numbers tab lists every Aeroquip part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Aeroquip part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| For Use With | Short Pilot |
| Product Type | Straight O-Ring Fitting |
| Refrigerant Type | 134A, Mp39, Mp66, R12, R22, R404A, R502 |
Shipping & lead time
Sizes & part numbers
6 sizes- Eaton Aeroquip part no.FJ3052-0606S
- Description
- O-Ring Hose Fitting O-Ring Fitting, 6 Dash Size, 0.31 Inch Hose I.D.
- Working pressure (bar)
- 34
- Eaton Aeroquip part no.FJ3052-0608S
- Description
- Male O-ring Hose Fitting 8 Dash
- Working pressure (bar)
- 34
- Eaton Aeroquip part no.FJ3052-0808S
- Description
- O-Ring Hose Fitting O-Ring Fitting, 8 Dash Size, 0.41 Inch Hose I.D., Steel
- Working pressure (bar)
- 34
- Eaton Aeroquip part no.FJ3052-1012S
- Description
- Male O-ring Hose Fitting 12 Dash
- Working pressure (bar)
- 34
- Eaton Aeroquip part no.FJ3052-1212S
- Description
- O-Ring Hose Fitting O-Ring Fitting, 12 Dash Size, 0.63 Inch Hose I.D.
- Working pressure (bar)
- 34
- Eaton Aeroquip part no.FJ3052-1010S
- Description
- O-Ring Hose Fitting O-Ring Fitting, 10 Dash Size, 0.5 Inch Hose I.D.
- Working pressure (bar)
- 34
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Aeroquip FJ3052 male O-ring hose fitting used for?▾
How do I read an Aeroquip FJ3052 part number such as FJ3052-0608S?▾
Which hose sizes does the Aeroquip FJ3052 fitting come in?▾
How do I choose the right FJ3052 part number for my refrigerant hose?▾
What pressure is the Aeroquip FJ3052 fitting rated for?▾
Which refrigerants and materials suit the Aeroquip FJ3052 fitting?▾
Does the Aeroquip FJ3052 fitting follow a standard?▾
What does the Aeroquip FJ3052 male O-ring fitting connect to?▾
How is the Aeroquip FJ3052 fitting assembled onto refrigerant hose?▾
How does the Aeroquip FJ3052 differ from the FJ3019 90° fitting?▾
Where is the Aeroquip FJ3052 fitting made, and can it be exported from Dubai?▾
Do you keep the Aeroquip FJ3052 fitting in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Assembly, crimping & certification
Braided against spiral hose fittings: why the same thread comes in two crimp series
A JIC female swivel for 2SN and a JIC female swivel for 4SP look alike and are different parts. Which hoses each series fits, the end families in each, and what happens when they are swapped.
4 min read
Assembly, crimping & certification
Crimp fittings for braided hydraulic hose: series, ferrules, skive or no-skive, and the crimp diameter
Gates puts it bluntly: a 3,000 psi coupling on a 3,000 psi hose does not always make a 3,000 psi assembly. What makes it one is a fitting series approved for that hose, the matching ferrule, the right die and a crimp diameter inside a tolerance of a few thousandths of an inch. Crimp fittings and ferrules for 1SN, 2SN, 2SC and R16 braided hose — the end forms, skive and no-skive, ratings by size, and how to check a crimp.
11 min read
Assembly, crimping & certification
Hydraulic hose assembly: specifying, cutting, crimping, testing and tagging
A hose assembly is a manufactured part, not a length of hose with ends on. The steps that make one right — from the specification to the crimp diameter, the proof test and the tag — and the mistakes that make one wrong.
6 min read








