What sizes does the 90° Elbow BSP Male 60° Seat × Metric Male come in?

17 sizes are listed, covering -02 to -24. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one.

Is it available in stainless steel?

Yes. Every size is available in 316 stainless steel on request — add "-SS" to the part number when you enquire. Lead time is longer than for the zinc-plated carbon-steel stock.

Can I get it faster than the quoted lead time?

Tell us it is a plant-down job when you enquire. Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST.

What thread family does this adapter use?

BSP. ISO 228 parallel thread, ISO 6149. The seat is 60° cone seat and Metric O-ring stud end. Check the thread on each end against the size table before ordering.

What are the port specs?

Port A: BSP Male 60° Seat. Port B: Metric Male L-Series ISO 6149-3. Port A: BSP (G) G1/8-28 to G1.1/2-11. Port B: Metric M10×1 to M48×2.

What sizes are available?

17 sizes are listed, covering -02 to -24. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one. Sizes outside the table are quoted on request.

What is the maximum working pressure?

The manufacturer publishes no pressure rating for this family, so this page does not state one. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

What materials and finishes are available?

Standard: carbon steel with a zinc-plated, Cr3+ passivated, RoHS-compliant finish. 316 stainless steel is available on request for marine, chemical or food-grade service — add "-SS" to the part number when you enquire.

Is this adapter interchangeable with other thread families?

No. BSP is a thread family in its own right and does not interchange with BSP, JIC, NPT, metric or ORFS. Where you need to cross between families, use the adapter built for that pair rather than forcing a thread that nearly fits.

Do I need to crimp this onto a hose?

No. These are tube and port adapters, not hose ends — they thread into a port or join two threaded ends. For a hose assembly use Indus crimp ferrules with the matching Indus hose-end fitting.

Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST. Less-common combinations ship within 7 working days of RFQ confirmation; say if it is a plant-down job and we will prioritise it.

INDUS HYDRAULICSIH-AD-BSP-063

90° Elbow BSP Male 60° Seat × Metric Male

Name: 90° Elbow BSP Male 60° Seat × Metric Male
Brand: Indus Hydraulics
SKU: IH-AD-BSP-063

BSP AdaptersEx-stock · delivery in 3 days

VIEW 01·90° elbow adapter, BSP male 60° seat × metric male, forged zinc-plated steel

90° Elbow BSP Male 60° Seat × Metric Male — BSP adapter, 90 elbow body, 17 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.

Key features

Body Configuration: 90 elbow
Port A Thread: BSP (G) G1/8-28 to G1.1/2-11
Port A Sealing: 60° cone seat
Nominal Size Range: -02 to -24

Body Configuration: 90 elbow
Port A Thread: BSP (G) G1/8-28 to G1.1/2-11
Port A Sealing: 60° cone seat
Nominal Size Range: -02 to -24

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The 90° Elbow BSP Male 60° Seat × Metric Male is a 90 elbow hydraulic adapter in the Indus BSP range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions and the part number to quote.

Construction

Body configuration: 90 elbow
Port A: BSP Male 60° Seat
Port B: Metric Male L-Series ISO 6149-3
Material: carbon steel (stainless steel available on request)
Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant

Threads

Port A: BSP (G) G1/8-28 to G1.1/2-11
Port B: Metric M10×1 to M48×2

Sealing

60° cone seat and Metric O-ring stud end. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.

Performance

The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

Applicable standards

ISO 228 parallel thread, ISO 6149.

How to order

Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.

Companion products

These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.

Identification

Parameter	Value
Body Configuration	90 elbow

Port A

Parameter	Value
Port A Thread	BSP (G) G1/8-28 to G1.1/2-11
Port A Sealing	60° cone seat
Port A Gender	male

Port B

Parameter	Value
Port B Thread	Metric M10×1 to M48×2
Port B Sealing	Metric O-ring stud end
Port B Gender	male

Dimensions

Parameter	Value
Nominal Size Range	-02 to -24

Construction

Parameter	Value
Material	Carbon steel (stainless on request)
Surface Treatment	Zinc-plated, Cr3+ passivated, RoHS-compliant

Compliance

Parameter	Value
Applicable Standards	ISO 228 parallel thread, ISO 6149

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

17 sizes

Indus part no.	End 1	End 2	S1 (mm)	S2 (mm)	L1 (mm)	L2 (mm)
IH-AD-BSP-063-0210OG	G1/8"X28	M10X1	11	14	17	27
IH-AD-BSP-063-0212OG	G1/8"X28	M12X1.5	11	17	17	27
IH-AD-BSP-063-0412OG	G1/4"X19	M12X1.5	14	17	20.3	27
IH-AD-BSP-063-0414OG	G1/4"X19	M14X1.5	14	19	20.3	32
IH-AD-BSP-063-0416OG	G1/4"X19	M16X1.5	16	22	20.8	35
IH-AD-BSP-063-0614OG	G3/8"X19	M14X1.5	16	19	22.3	32
IH-AD-BSP-063-0616OG	G3/8"X19	M16X1.5	16	22	22.3	35
IH-AD-BSP-063-0618OG	G3/8"X19	M18X1.5	19	24	23	36
IH-AD-BSP-063-0818OG	G1/2"X14	M18X1.5	22	24	27.3	36
IH-AD-BSP-063-0822OG	G1/2"X14	M22X1.5	22	27	27.3	41
IH-AD-BSP-063-1022OG	G5/8"X14	M22X1.5	22	27	27.8	41
IH-AD-BSP-063-1222OG	G3/4"X14	M22X1.5	27	27	31	41
IH-AD-BSP-063-1227OG	G3/4"X14	M27X2	27	32	31	45
IH-AD-BSP-063-1627OG	G1"X11	M27X2	33	32	34.5	45
IH-AD-BSP-063-1633OG	G1"X11	M33X2	33	41	34.5	49
IH-AD-BSP-063-2042OG	G1.1/4"X11	M42X2	41	50	39	60
IH-AD-BSP-063-2448OG	G1.1/2"X11	M48X2	48	55	44	68

End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: Adapter 90° Bogen BSP Außengewinde 60° Konus auf metrisch Außengewinde
fr: adaptateur coude 90° BSP mâle cône 60° sur métrique mâle
es: adaptador codo 90° BSP macho cono 60° a métrica macho
it: adattatore gomito 90° BSP maschio cono 60° a metrica maschio

From the blog

Written about this range

Thread & fitting identification

BSPP bonded seals and dowty washers: getting the size right

A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.

5 min read

Thread & fitting identification

Fittings on a used Japanese machine: the 30° seat problem

Two common families share a 30° seat and use different threads underneath it. Checking the angle alone tells you they match, and they do not — here is how to separate them.

3 min read

Thread & fitting identification

Thread size and pitch, by family: the reference table for the bench

JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.

6 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

Straight adapter, BSP male 60° seat × metric male 60° seat or bonded seal, hex nipple

IH-AD-BSP-064

90° Elbow BSP Male 60° Seat × Metric Male

Key features

Product description

Construction

Threads

Sealing

Performance

Applicable standards

How to order

Companion products

Identification

Port A

Port B

Dimensions

Construction

Compliance

Shipping & lead time

Sizes & part numbers

Written about this range

BSPP bonded seals and dowty washers: getting the size right

Fittings on a used Japanese machine: the 30° seat problem

Thread size and pitch, by family: the reference table for the bench

Engineers viewing this also looked at

BSP Male 60° Seat or Bonded Seal × Metric Male 60° Seat or Bonded Seal

BSP Male 60° Seat or Bonded Seal × JIC Female 74° Seat

90° Elbow BSPT Male × BSP Female 60° Cone

BSPT Female

90° Elbow BSPT Female

90° Elbow BSPT Male 60° Seat × BSPT Female

BSP Male O-Ring × BSPT Female

BSPT Male 60° Seat Plug