What sizes does the BSP Male 60° Seat or Bonded Seal × JIC Female 74° Seat come in?

39 sizes are listed, covering -02 to -32. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one.

Is it available in stainless steel?

Yes. Every size is available in 316 stainless steel on request — add "-SS" to the part number when you enquire. Lead time is longer than for the zinc-plated carbon-steel stock.

Can I get it faster than the quoted lead time?

Tell us it is a plant-down job when you enquire. Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST.

What thread family does this adapter use?

BSP. SAE J514, ISO 8434-2. The seat is bonded seal washer and JIC 37° cone (74° included). Check the thread on each end against the size table before ordering.

What are the port specs?

Port A: BSP Male Double Use for 60° Seat or Bonded Seal. Port B: JIC Female 74° Seat. Port A: BSP (G) G1/8-28 to G2-11. Port B: UN/UNF 7/16-20 to 2.1/2-12.

What sizes are available?

39 sizes are listed, covering -02 to -32. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one. Sizes outside the table are quoted on request.

What is the maximum working pressure?

The manufacturer publishes no pressure rating for this family, so this page does not state one. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

What materials and finishes are available?

Standard: carbon steel with a zinc-plated, Cr3+ passivated, RoHS-compliant finish. 316 stainless steel is available on request for marine, chemical or food-grade service — add "-SS" to the part number when you enquire.

Is this adapter interchangeable with other thread families?

No. BSP is a thread family in its own right and does not interchange with BSP, JIC, NPT, metric or ORFS. Where you need to cross between families, use the adapter built for that pair rather than forcing a thread that nearly fits.

Do I need to crimp this onto a hose?

No. These are tube and port adapters, not hose ends — they thread into a port or join two threaded ends. For a hose assembly use Indus crimp ferrules with the matching Indus hose-end fitting.

Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST. Less-common combinations ship within 7 working days of RFQ confirmation; say if it is a plant-down job and we will prioritise it.

INDUS HYDRAULICSIH-AD-BSP-065

BSP Male 60° Seat or Bonded Seal × JIC Female 74° Seat

Name: BSP Male 60° Seat or Bonded Seal × JIC Female 74° Seat
Brand: Indus Hydraulics
SKU: IH-AD-BSP-065

BSP AdaptersEx-stock · delivery in 3 days

VIEW 01·Straight adapter, BSP male 60° seat or bonded seal × JIC 37° female, hex body

BSP Male 60° Seat or Bonded Seal × JIC Female 74° Seat — BSP adapter, straight body, 39 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.

Key features

Body Configuration: straight
Port A Thread: BSP (G) G1/8-28 to G2-11
Port A Sealing: Bonded seal washer
Nominal Size Range: -02 to -32

Body Configuration: straight
Port A Thread: BSP (G) G1/8-28 to G2-11
Port A Sealing: Bonded seal washer
Nominal Size Range: -02 to -32

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The BSP Male 60° Seat or Bonded Seal × JIC Female 74° Seat is a straight hydraulic adapter in the Indus BSP range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions and the part number to quote.

Construction

Body configuration: straight
Port A: BSP Male Double Use for 60° Seat or Bonded Seal
Port B: JIC Female 74° Seat
Material: carbon steel (stainless steel available on request)
Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant

Threads

Port A: BSP (G) G1/8-28 to G2-11
Port B: UN/UNF 7/16-20 to 2.1/2-12

Sealing

Bonded seal washer and JIC 37° cone (74° included). Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.

Performance

The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

Applicable standards

SAE J514, ISO 8434-2.

How to order

Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.

Companion products

These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.

Identification

Parameter	Value
Body Configuration	straight

Port A

Parameter	Value
Port A Thread	BSP (G) G1/8-28 to G2-11
Port A Sealing	Bonded seal washer
Port A Gender	male

Port B

Parameter	Value
Port B Thread	UN/UNF 7/16-20 to 2.1/2-12
Port B Sealing	JIC 37° cone (74° included)
Port B Gender	female

Dimensions

Parameter	Value
Nominal Size Range	-02 to -32

Construction

Parameter	Value
Material	Carbon steel (stainless on request)
Surface Treatment	Zinc-plated, Cr3+ passivated, RoHS-compliant

Compliance

Parameter	Value
Applicable Standards	SAE J514, ISO 8434-2

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

39 sizes

Indus part no.	End 1	End 2	S1 (mm)	S2 (mm)	L (mm)	L1 (mm)
IH-AD-BSP-065-0204	G1/8"X28	7/16"X20	14	14	24	10
IH-AD-BSP-065-0206	G1/8"X28	9/16"X18	14	19	24.5	10
IH-AD-BSP-065-04	G1/4"X19	7/16"X20	19	15	26	12
IH-AD-BSP-065-0405	G1/4"X19	1/2"X20	19	17	26.5	12
IH-AD-BSP-065-0406	G1/4"X19	9/16"X18	19	19	27	12
IH-AD-BSP-065-0408	G1/4"X19	3/4"X16	19	24	29	12
IH-AD-BSP-065-06	G3/8"X19	9/16"X18	22	19	30.5	13.5
IH-AD-BSP-065-0608	G3/8"X19	3/4"X16	22	24	32.5	13.5
IH-AD-BSP-065-0610	G3/8"X19	7/8"X14	22	27	33	13.5
IH-AD-BSP-065-08	G1/2"X14	3/4"X16	27	24	37	16
IH-AD-BSP-065-0806	G1/2"X14	9/16"X18	27	19	35	16
IH-AD-BSP-065-0810	G1/2"X14	7/8"X14	27	27	37.5	16
IH-AD-BSP-065-10	G5/8"X14	7/8"X14	30	27	37.5	17.5
IH-AD-BSP-065-12	G3/4"X14	1.1/16"X12	32	32	42	18.5
IH-AD-BSP-065-1208	G3/4"X14	3/4"X16	32	24	40	18.5
IH-AD-BSP-065-1210	G3/4"X14	7/8"X14	32	27	41	18.5
IH-AD-BSP-065-1216	G3/4"X14	1.5/16"X12	32	41	42	18.5
IH-AD-BSP-065-16	G1"X11	1.5/16"X12	41	41	46	20.5
IH-AD-BSP-065-1620	G1"X11	1.5/8"X12	41	50	50	20.5
IH-AD-BSP-065-20	G1.1/4"X11	1.5/8"X12	50	50	52	20.5
IH-AD-BSP-065-2024	G1.1/4"X11	1.7/8"X12	50	55	53.5	20.5
IH-AD-BSP-065-24	G1.1/2"X11	1.7/8"X12	55	55	56.5	23
IH-AD-BSP-065-32	G2"X11	2.1/2"X12	70	75	60	25.5
IH-AD-BSP-065-0204WD	G1/8"X28	7/16"X20	14	15	23.5	8
IH-AD-BSP-065-0405WD	G1/4"X19	1/2"X20	19	17	28.5	12
IH-AD-BSP-065-0406WD	G1/4"X19	9/16"X18	19	19	28.5	12
IH-AD-BSP-065-0408WD	G1/4"X19	3/4"X16	19	24	30.5	12
IH-AD-BSP-065-04WD	G1/4"X19	7/16"X20	19	15	28	12
IH-AD-BSP-065-0608WD	G3/8"X19	3/4"X16	22	24	33	12
IH-AD-BSP-065-06WD	G3/8"X19	9/16"X18	22	19	31	12
IH-AD-BSP-065-0806WD	G1/2"X14	9/16"X18	27	19	33.5	14
IH-AD-BSP-065-0810WD	G1/2"X14	7/8"X14	27	27	38	14
IH-AD-BSP-065-08WD	G1/2"X14	3/4"X16	27	24	37.5	14
IH-AD-BSP-065-1216WD	G3/4"X14	1.5/16"X12	32	41	42.5	16
IH-AD-BSP-065-12WD	G3/4"X14	1.1/16"X12	32	32	42.5	16
IH-AD-BSP-065-16WD	G1"X11	1.5/16"X12	41	41	46.5	18
IH-AD-BSP-065-2016WD	G1.1/4"X11	1.5/16"X12	50	41	50.5	20
IH-AD-BSP-065-20WD	G1.1/4"X11	1.5/8"X12	50	50	54.5	20
IH-AD-BSP-065-24WD	G1.1/2"X11	1.7/8"X12	55	55	58.5	22

End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: Usit-Ring (Bonded Seal) BSP Außengewinde 60° Konus auf JIC Innengewinde
fr: joint Bonded Seal BSP mâle cône 60° sur JIC femelle
es: junta Bonded Seal BSP macho cono 60° a JIC hembra
it: guarnizione Bonded Seal BSP maschio cono 60° a JIC femmina

From the blog

Written about this range

Thread & fitting identification

BSPP bonded seals and dowty washers: getting the size right

A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.

5 min read

Thread & fitting identification

Fittings on a used Japanese machine: the 30° seat problem

Two common families share a 30° seat and use different threads underneath it. Checking the angle alone tells you they match, and they do not — here is how to separate them.

3 min read

Thread & fitting identification

Thread size and pitch, by family: the reference table for the bench

JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.

6 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

90° elbow adapter, BSPT male × BSP female 60° cone swivel nut, zinc-plated steel

IH-AD-BSP-066

BSP Male 60° Seat or Bonded Seal × JIC Female 74° Seat

Key features

Product description

Construction

Threads

Sealing

Performance

Applicable standards

How to order

Companion products

Identification

Port A

Port B

Dimensions

Construction

Compliance

Shipping & lead time

Sizes & part numbers

Written about this range

BSPP bonded seals and dowty washers: getting the size right

Fittings on a used Japanese machine: the 30° seat problem

Thread size and pitch, by family: the reference table for the bench

Engineers viewing this also looked at

90° Elbow BSPT Male × BSP Female 60° Cone

BSPT Female

90° Elbow BSPT Female

90° Elbow BSPT Male 60° Seat × BSPT Female

BSP Male O-Ring × BSPT Female

BSPT Male 60° Seat Plug

JIS Gas Male 60° Cone × JIS Gas Male 60° Cone

JIS Gas Male 60° Cone × BSPT Male 60° Seat