3 Segment Clamp for Storz

The 3 Segment Clamp for Storz is a Storz Coupling / Adapter from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.

Configuration

• Coupling family: Storz Coupling / Adapter
• Coupling type: Storz Coupling & Adapter — 3 Segment Clamp for Storz
• End A: Coupling face — standard
• End B: Threaded / barbed back per variant

Specifications

• Size range: 1-1/2", 2-1/2", 3", 4", 5", 6" (Storz pattern sizes 25-150)
• Material: Aluminum (painted / hard-anodized), Brass, or 316 Stainless Steel
• Working pressure: Up to 16 bar (232 psi) — typical fire-service Storz rating
• Seal / clamp: Suction (gray) or pressure (black) gasket per service
• Applicable standards: DIN 14301 (German Storz fire-hose connection standard); UL listed (FDC variants)

Family context

Storz couplings are the German / European fire-service standard (DIN 14301) — the most widely used fire-hose connector outside the US. Single-piece coupling with two interlocking lugs that engage 90°. Aluminum (painted / hard-anodized), brass, or 316 SS construction. UL-listed FDC (Fire Department Connection) variants for US fire-protection service. Sizes Storz 25–150 (1-1/2"–6"). Suction (gray) or pressure (black) gaskets per service.

How to order

Specify (a) the size, (b) the body material if multiple options are listed, and (c) any thread / seal / gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.

Companion products

Pair with the appropriate matching coupling half from the same family, plus the host hose / pipe / equipment. Browse the Sealfast and Sunpool industrial coupling ranges via the Indus Hydraulics catalogue.