Skip to content
SUNPOOLIH-STZ-STORZ-ADAPTER-FEMALE-THREAD· MADE IN TAIWAN

AL Storz Adapter-Female Thread

Storz Couplings & AdaptersEx-stock · delivery in 3 days
Aluminium Storz adapter with female thread and seal
VIEW 01·Aluminium Storz adapter with female thread and seal

AL Storz Adapter-Female Thread — aluminium Storz adapter to a female NPT, BSP or NST thread. Sizes 1"–6". Forged Aluminum: 6061 T6; Casted Aluminum: A356. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.

Key features

  • Coupling Family: Storz Coupling / Adapter
  • Coupling Type / Variant: Storz Coupling & Adapter — Storz Adapter-Female Thread
  • End A Configuration: Storz head
  • End B Configuration: Female thread — NPT, BSP or NST
  • Size Range: 1" to 6"
Coupling Family
Storz Coupling / Adapter
Coupling Type / Variant
Storz Coupling & Adapter — Storz Adapter-Female Thread
End A Configuration
Storz head
End B Configuration
Female thread — NPT, BSP or NST
Size Range
1" to 6"
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The AL Storz Adapter-Female Thread is a Storz Coupling / Adapter from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.

Configuration

  • Coupling family: Storz Coupling / Adapter
  • Coupling type: Storz Coupling & Adapter — Storz Adapter-Female Thread
  • End A: Storz head
  • End B: Female thread — NPT, BSP or NST

Specifications

  • Size range: 1"–6"
  • Material: Forged Aluminum: 6061 T6; Casted Aluminum: A356
  • Working pressure: Not published by Sunpool. Give us your working pressure and medium and we will check it with the manufacturer.
  • Seal: Gasket in the Storz head; suction gasket to order (Sunpool code S)
  • Standard: Made to the DIN Storz pattern (Sunpool does not give the standard number)

Manufacturer notes

  • Storz adapter with NPT, BSP, or NST female thread.
  • Anodized or vibration finished is available by request.
  • Conformed to DIN Standard.

About the family

Storz is a symmetrical hose coupling: every head is identical, with two hooked lugs and a ring, so there is no male or female half. Two heads of the same size are pressed face to face and turned until the lugs lock. A Storz size is identified by the distance across its lugs, which is why two heads made for nearly the same hose bore can be different sizes. Sunpool makes the range in cast aluminium (A356), forged aluminium (6061-T6), brass, bronze and stainless steel: long-shank hose couplings, thread adapters, fire department connection fittings, safety-latch couplings and adapters, gaskets and clamps.

Selection and service notes

Match the Storz size, not just the hose bore: check the lug distance or the size marking. Each joint seals on the gasket in the face of the heads, so inspect it at every make-up; Sunpool fits a discharge gasket as standard and a suction gasket to order. A safety latch stops the heads turning apart where a hose is dragged or vibrates. Storz does not connect to cam and groove, Guillemin or threaded fittings without an adapter.

How to order

Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.

Further reading: Storz coupling sizes and lug distances.

Sunpool sizes

Each Storz size is made with the female thread sizes below, in NPT, BSP or NST. Sunpool makes this adapter in 1"–6". The size table lists every combination under its own Indus part number.

Storz sizeLug distance (mm)Female thread sizes
25D311/2", 3/4", 1", 1-1/4"
38—1", 1-1/4", 1-1/2", 2"
52C661", 1-1/4", 1-1/2", 2", 2-1/2"
65811", 1-1/4", 1-1/2", 2", 2-1/2", 3"
75B892", 2-1/2", 3"
110A1333", 4", 5"
1251485"
1501606"

Sizes and dimensions from Sunpool’s catalogue page for this part, checked 7 October 2026.

Identification

ParameterValue
Coupling FamilyStorz Coupling / Adapter
Coupling Type / VariantStorz Coupling & Adapter — Storz Adapter-Female Thread

Configuration

ParameterValue
End A ConfigurationStorz head
End B ConfigurationFemale thread — NPT, BSP or NST

Dimensions

ParameterValue
Size Range1" to 6"

Construction

ParameterValue
Materials AvailableForged Aluminum: 6061 T6; Casted Aluminum: A356
Seal / GasketGasket in the Storz head; suction gasket to order (Sunpool code S)

Compliance

ParameterValue
Applicable StandardsMade to the DIN Storz pattern (Sunpool does not give the standard number)

Notes

ParameterValue
NotesStorz adapter with NPT, BSP, or NST female thread. Anodized or vibration finished is available by request. Conformed to DIN Standard.

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in Taiwan

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Storz-Kupplung Innengewinde
fr
raccord Storz femelle
es
acoplamiento Storz hembra
it
raccordo Storz femmina

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at