AL Storz Adapter-Male Thread

AL Storz Adapter-Male Thread — aluminium Storz adapter to a male NPT, BSP or NST thread. Sizes 1"–6". Forged Aluminum: 6061 T6; Casted Aluminum: A356. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Storz Coupling / Adapter
- Coupling Type / Variant: Storz Coupling & Adapter — Storz Adapter-Male Thread
- End A Configuration: Storz head
- End B Configuration: Male thread — NPT, BSP or NST
- Size Range: 1" to 6"
- Coupling Family
- Storz Coupling / Adapter
- Coupling Type / Variant
- Storz Coupling & Adapter — Storz Adapter-Male Thread
- End A Configuration
- Storz head
- End B Configuration
- Male thread — NPT, BSP or NST
- Size Range
- 1" to 6"
Product description
The AL Storz Adapter-Male Thread is a Storz Coupling / Adapter from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Storz Coupling / Adapter
- Coupling type: Storz Coupling & Adapter — Storz Adapter-Male Thread
- End A: Storz head
- End B: Male thread — NPT, BSP or NST
Specifications
- Size range: 1"–6"
- Material: Forged Aluminum: 6061 T6; Casted Aluminum: A356
- Working pressure: Not published by Sunpool. Give us your working pressure and medium and we will check it with the manufacturer.
- Seal: Gasket in the Storz head; suction gasket to order (Sunpool code S)
- Standard: Made to the DIN Storz pattern (Sunpool does not give the standard number)
Manufacturer notes
- Storz adapter with NPT, BSP, or NST male thread.
- Anodized or vibration finished is available by request.
- Conformed to DIN Standard.
About the family
Storz is a symmetrical hose coupling: every head is identical, with two hooked lugs and a ring, so there is no male or female half. Two heads of the same size are pressed face to face and turned until the lugs lock. A Storz size is identified by the distance across its lugs, which is why two heads made for nearly the same hose bore can be different sizes. Sunpool makes the range in cast aluminium (A356), forged aluminium (6061-T6), brass, bronze and stainless steel: long-shank hose couplings, thread adapters, fire department connection fittings, safety-latch couplings and adapters, gaskets and clamps.
Selection and service notes
Match the Storz size, not just the hose bore: check the lug distance or the size marking. Each joint seals on the gasket in the face of the heads, so inspect it at every make-up; Sunpool fits a discharge gasket as standard and a suction gasket to order. A safety latch stops the heads turning apart where a hose is dragged or vibrates. Storz does not connect to cam and groove, Guillemin or threaded fittings without an adapter.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: Storz coupling sizes and lug distances.
Sunpool sizes
Each Storz size is made with the male thread sizes below, in NPT, BSP or NST. Sunpool makes this adapter in 1"–6". The size table lists every combination under its own Indus part number.
| Storz size | Lug distance (mm) | Male thread sizes |
|---|---|---|
| 25D | 31 | 1/2", 3/4", 1", 1-1/4" |
| 38 | — | 1", 1-1/4", 1-1/2", 2" |
| 52C | 66 | 1", 1-1/4", 1-1/2", 2", 2-1/2" |
| 65 | 81 | 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" |
| 75B | 89 | 2", 2-1/2", 3" |
| 110A | 133 | 3", 4", 5" |
| 125 | 148 | 5" |
| 150 | 160 | 6" |
Sizes and dimensions from Sunpool’s catalogue page for this part, checked 7 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Storz Coupling / Adapter |
| Coupling Type / Variant | Storz Coupling & Adapter — Storz Adapter-Male Thread |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Storz head |
| End B Configuration | Male thread — NPT, BSP or NST |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1" to 6" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Forged Aluminum: 6061 T6; Casted Aluminum: A356 |
| Seal / Gasket | Gasket in the Storz head; suction gasket to order (Sunpool code S) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | Made to the DIN Storz pattern (Sunpool does not give the standard number) |
Notes
| Parameter | Value |
|---|---|
| Notes | Storz adapter with NPT, BSP, or NST male thread. Anodized or vibration finished is available by request. Conformed to DIN Standard. |
Shipping & lead time
Sizes & part numbers
27 sizes- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-25-050
- End 1
- Storz 25D
- End 2
- 1/2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-25-075
- End 1
- Storz 25D
- End 2
- 3/4" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-25-100
- End 1
- Storz 25D
- End 2
- 1" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-25-125
- End 1
- Storz 25D
- End 2
- 1-1/4" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-38-100
- End 1
- Storz 38
- End 2
- 1" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-38-125
- End 1
- Storz 38
- End 2
- 1-1/4" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-38-150
- End 1
- Storz 38
- End 2
- 1-1/2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-38-200
- End 1
- Storz 38
- End 2
- 2" male thread
Show all 27 sizesShow fewer sizes
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-52-100
- End 1
- Storz 52C
- End 2
- 1" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-52-125
- End 1
- Storz 52C
- End 2
- 1-1/4" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-52-150
- End 1
- Storz 52C
- End 2
- 1-1/2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-52-200
- End 1
- Storz 52C
- End 2
- 2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-52-250
- End 1
- Storz 52C
- End 2
- 2-1/2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-65-100
- End 1
- Storz 65
- End 2
- 1" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-65-125
- End 1
- Storz 65
- End 2
- 1-1/4" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-65-150
- End 1
- Storz 65
- End 2
- 1-1/2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-65-200
- End 1
- Storz 65
- End 2
- 2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-65-250
- End 1
- Storz 65
- End 2
- 2-1/2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-65-300
- End 1
- Storz 65
- End 2
- 3" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-75-200
- End 1
- Storz 75B
- End 2
- 2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-75-250
- End 1
- Storz 75B
- End 2
- 2-1/2" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-75-300
- End 1
- Storz 75B
- End 2
- 3" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-110-300
- End 1
- Storz 110A
- End 2
- 3" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-110-400
- End 1
- Storz 110A
- End 2
- 4" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-110-500
- End 1
- Storz 110A
- End 2
- 5" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-125-500
- End 1
- Storz 125
- End 2
- 5" male thread
- Indus part no.IH-STZ-STORZ-ADAPTER-MALE-THREAD-150-600
- End 1
- Storz 150
- End 2
- 6" male thread
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
What is the AL Storz Adapter-Male Thread and what is it used for?▾
How do I read the part numbers of the AL Storz Adapter-Male Thread, such as IH-STZ-STORZ-ADAPTER-MALE-THREAD-25-050?▾
What Storz sizes and thread sizes does the AL Storz Adapter-Male Thread come in?▾
What lug distances do the Storz sizes on the AL Storz Adapter-Male Thread have?▾
What is the working pressure of the AL Storz Adapter-Male Thread?▾
What is the AL Storz Adapter-Male Thread made of?▾
What standard does the AL Storz Adapter-Male Thread conform to?▾
What does the AL Storz Adapter-Male Thread connect to?▾
How should the AL Storz Adapter-Male Thread be inspected and maintained?▾
How does the AL Storz Adapter-Male Thread compare with the AL Storz Adapter-Female Thread?▾
Where is the AL Storz Adapter-Male Thread made?▾
Is the AL Storz Adapter-Male Thread in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Storz-Kupplung Außengewinde
- fr
- raccord Storz mâle
- es
- acoplamiento Storz macho
- it
- raccordo Storz maschio
From the blog








