Skip to content
SUNPOOLIH-STZ-STORZ-COUPLING-WITH-SAFETY-LATCH· MADE IN TAIWAN

Storz Coupling with Safety Latch

Storz Couplings & AdaptersEx-stock · delivery in 3 days
Storz coupling with safety latch, dark finish
VIEW 01·Storz coupling with safety latch, dark finish

Storz Coupling with Safety Latch — forged aluminium Storz coupling with a stainless auto-lock latch and a tail for a 3-segment clamp. Sizes 4", 5" and 6". Forged Aluminum: 6061 T6; Gasket: NBR; Latch: SS304. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.

Key features

  • Coupling Family: Storz Coupling / Adapter
  • Coupling Type / Variant: Storz Coupling & Adapter — Storz Coupling with Safety Latch
  • End A Configuration: 4", 5" or 6" Storz head with a stainless safety latch
  • End B Configuration: Hose tail for a 3-segment clamp
  • Size Range: 4"- Lug Distance: 115mm; 5"- Lug Distance: 148mm; 6"- Lug Distance: 160mm
Coupling Family
Storz Coupling / Adapter
Coupling Type / Variant
Storz Coupling & Adapter — Storz Coupling with Safety Latch
End A Configuration
4", 5" or 6" Storz head with a stainless safety latch
End B Configuration
Hose tail for a 3-segment clamp
Size Range
4"- Lug Distance: 115mm; 5"- Lug Distance: 148mm; 6"- Lug Distance: 160mm
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The Storz Coupling with Safety Latch is a Storz Coupling / Adapter from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.

Configuration

  • Coupling family: Storz Coupling / Adapter
  • Coupling type: Storz Coupling & Adapter — Storz Coupling with Safety Latch
  • End A: 4", 5" or 6" Storz head with a stainless safety latch
  • End B: Hose tail for a 3-segment clamp

Specifications

  • Size range: 4", 5" and 6"
  • Material: Forged Aluminum: 6061 T6; Gasket: NBR; Latch: SS304
  • Working pressure: Not published by Sunpool. Give us your working pressure and medium and we will check it with the manufacturer.
  • Seal: NBR gasket
  • Standard: Conforms to NFPA 1963, per Sunpool

Manufacturer notes

  • Hard Anodized Treatment.
  • Hose tail compatible with 3-segment clamp.
  • Conformed to NFPA 1963.
  • Brass storz is available by request.
  • Vibration finished is available by request.

About the family

Storz is a symmetrical hose coupling: every head is identical, with two hooked lugs and a ring, so there is no male or female half. Two heads of the same size are pressed face to face and turned until the lugs lock. A Storz size is identified by the distance across its lugs, which is why two heads made for nearly the same hose bore can be different sizes. Sunpool makes the range in cast aluminium (A356), forged aluminium (6061-T6), brass, bronze and stainless steel: long-shank hose couplings, thread adapters, fire department connection fittings, safety-latch couplings and adapters, gaskets and clamps.

Selection and service notes

Match the Storz size, not just the hose bore: check the lug distance or the size marking. Each joint seals on the gasket in the face of the heads, so inspect it at every make-up; Sunpool fits a discharge gasket as standard and a suction gasket to order. A safety latch stops the heads turning apart where a hose is dragged or vibrates. Storz does not connect to cam and groove, Guillemin or threaded fittings without an adapter.

How to order

Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.

Further reading: Storz coupling sizes and lug distances.

Sunpool sizes

Sunpool makes this part in three Storz sizes, identified by the lug distance across the two lugs. Order by the Indus part number in the size table or by the Sunpool part number.

SizeStorz sizeLug distance (mm)Sunpool part no.
4"100115SZ-AF-100SAFT
5"125148SZ-AF-125SAFT
6"150160SZ-AF-150SAFT

Sizes, dimensions and part numbers from Sunpool’s catalogue page for this part and its Storz part-number list, checked 7 October 2026.

Identification

ParameterValue
Coupling FamilyStorz Coupling / Adapter
Coupling Type / VariantStorz Coupling & Adapter — Storz Coupling with Safety Latch

Configuration

ParameterValue
End A Configuration4", 5" or 6" Storz head with a stainless safety latch
End B ConfigurationHose tail for a 3-segment clamp

Dimensions

ParameterValue
Size Range4"- Lug Distance: 115mm; 5"- Lug Distance: 148mm; 6"- Lug Distance: 160mm

Construction

ParameterValue
Materials AvailableForged Aluminum: 6061 T6; Gasket: NBR; Latch: SS304
Seal / GasketNBR gasket

Compliance

ParameterValue
Applicable StandardsConforms to NFPA 1963, per Sunpool

Notes

ParameterValue
NotesHard Anodized Treatment. Hose tail compatible with 3-segment clamp. Conformed to NFPA 1963. Brass storz is available by request. Vibration finished is available by request.

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in Taiwan

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Storz-Kupplung
fr
raccord Storz
es
acoplamiento Storz
it
raccordo Storz

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at