Transair Fitting Wall Bracket

Transair Fitting Wall Bracket in brass: 4 part numbers.
Product description
Transair Fitting Wall Bracket in brass: 4 part numbers.
Specification
- Type: Fitting
- Material: Brass
- Pressure stated by the maker: 232 psi (16 bar)
- Temperature: 140°F
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Transair part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Transair part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Application | Air, Inert Gases, Vacuum |
| Compatible Tube Material | Aluminum |
| Fitting Material | Brass |
| Fitting Side A Connection Type | Push-To-Connect |
| Fitting Side B Connection Type | NPT |
| Included Pre-applied Thread Sealant | No |
| Release Ring Material | Stainless Steel |
| Release Type | Ring |
| Resistance Properties | Chemical Resistant, Corrosion Resistant |
| Specific Fitting Shape | 45° Wall Bracket |
| System Of Measurement | Imperial |
| Type | Wall Bracket |
| Vacuum | 0.03 in. hg |
Shipping & lead time
Sizes & part numbers
4 sizes- Transair part no.6640 17 22GR
- Description
- Fitting Wall Bracket For 12.70mm
- Working pressure (bar)
- 16
- Transair part no.6640 25 22GR
- Description
- Fitting Wall Bracket For 22.22mm
- Working pressure (bar)
- 16
- Transair part no.6689 17 22GR
- Description
- Fitting Wall Bracket For 12.70mm
- Working pressure (bar)
- 16
- Transair part no.6689 25 22GR
- Description
- Fitting Wall Bracket For 22.22mm
- Working pressure (bar)
- 16
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Transair wall bracket used for?▾
How do I read Transair part numbers such as 6640 17 22GR and 6689 25 22GR?▾
Which tube sizes does the Transair wall bracket fit?▾
What is the difference between the 6640 and 6689 Transair brackets?▾
What pressure and temperature does the Transair wall bracket have?▾
What is the Transair wall bracket made from?▾
Which documents are available for the Transair wall bracket?▾
What does the Transair wall bracket connect to?▾
How do I install the Transair wall bracket?▾
How does the Transair wall bracket differ from the Transair ball valve?▾
Where is the Transair wall bracket made and how is it exported?▾
Do you stock Transair wall bracket fittings in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
Sizing pneumatic valves: Cv, Kv, sonic conductance and matching a valve to a cylinder
What Cv, Kv and the ISO 6358 sonic conductance C and critical pressure ratio b each tell you, why Cv alone can mislead on air, how to work out the flow a cylinder needs and the valve Cv to deliver it using Parker’s published method, and how ISO 5599-1 plug-in valves differ from maker manifolds — including common vs individual exhaust.
13 min read
Pneumatics & compressed air
Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder
A push-in fitting grips the tube with a toothed collet and seals on its outside diameter with an O-ring — so the tube cut, the tube size and the thread end decide whether it holds. How push-in fittings work, fitting and releasing tube, pressure and temperature limits by maker, NPT vs BSPT vs BSPP, and how sintered bronze, plastic and speed-control mufflers affect exhaust back-pressure and cylinder speed.
12 min read








