Gast Pneumatic Mufflers

Gast Pneumatic Mufflers: 4 part numbers.
Product description
Gast Pneumatic Mufflers: 4 part numbers.
Specification
- Type: Muffler
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Gast part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing air preparation
Size filters, regulators and lubricators on port size and the air flow the downstream tools and cylinders need, not on line size alone; an undersized unit drops pressure at full flow. Quote the maker part number and we will confirm bowl, drain and gauge options before supply.
How to order
Quote the Gast part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Accessory Type | Filter |
| For Use With | Gast Air Compressor, Check Technical Sheet |
Shipping & lead time
Sizes & part numbers
4 sizes- Gast part no.AJ121D
- Description
- Muffler, 1-1/2 Npt
- Gast part no.AA900E
- Description
- Muffler, 32 Oz Glass
- Gast part no.AA900F
- Description
- Muffler, 32 Oz Glass
- Gast part no.AC995
- Description
- Muffler, 4Am
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What are the Gast pneumatic mufflers used for?▾
What do Gast part numbers like AJ121D and AA900E mean?▾
Which Gast muffler fits my compressor?▾
What is the difference between AA900E and AA900F?▾
What ratings do the Gast mufflers have?▾
What are the Gast mufflers made of?▾
Which documents are available for the Gast mufflers?▾
What do the Gast mufflers connect to?▾
How do I install and clean a Gast muffler?▾
How do Gast mufflers differ from the Texas Pneumatic Tools silencers?▾
Where are Gast mufflers made and how are they exported?▾
Do you stock Gast pneumatic mufflers in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
Sizing pneumatic valves: Cv, Kv, sonic conductance and matching a valve to a cylinder
What Cv, Kv and the ISO 6358 sonic conductance C and critical pressure ratio b each tell you, why Cv alone can mislead on air, how to work out the flow a cylinder needs and the valve Cv to deliver it using Parker’s published method, and how ISO 5599-1 plug-in valves differ from maker manifolds — including common vs individual exhaust.
13 min read
Pneumatics & compressed air
Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder
A push-in fitting grips the tube with a toothed collet and seals on its outside diameter with an O-ring — so the tube cut, the tube size and the thread end decide whether it holds. How push-in fittings work, fitting and releasing tube, pressure and temperature limits by maker, NPT vs BSPT vs BSPP, and how sintered bronze, plastic and speed-control mufflers affect exhaust back-pressure and cylinder speed.
12 min read








