Transair Fitting Ball Valve

Transair Fitting Ball Valve in brass: 6 part numbers.
Product description
Transair Fitting Ball Valve in brass: 6 part numbers.
Specification
- Type: Fitting
- Material: Brass
- Pressure stated by the maker: 232 psi (16 bar)
- Temperature: 140°F
- Part numbers: 6
Sizes and part numbers
The Sizes & Part Numbers tab lists every Transair part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Transair part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Compatible Tube Material | Aluminum |
| Fitting Material | Brass |
| Fitting Side A Connection Type | Push-To-Connect |
| Fitting Side B Connection Type | NPT |
| Included Pre-applied Thread Sealant | No |
| Release Ring Material | Stainless Steel |
| Release Type | Ring |
| Resistance Properties | Chemical Resistant, Corrosion Resistant |
| Specific Fitting Shape | 45° Wall Bracket With Ball Valve |
| System Of Measurement | Imperial |
| Type | Ball Valve |
| Vacuum | 0.03 in. hg |
Shipping & lead time
Sizes & part numbers
6 sizes- Transair part no.6679 17 22GR
- Description
- Fitting Ball Valve For 12.70mm
- Working pressure (bar)
- 16
- Transair part no.6679 25 22GR
- Description
- Fitting Ball Valve For 22.22mm
- Working pressure (bar)
- 16
- Transair part no.6694 17 22GR
- Description
- Fitting Ball Valve For 12.70mm
- Working pressure (bar)
- 16
- Transair part no.6694 25 22GR
- Description
- Fitting Ball Valve For 22.22mm
- Working pressure (bar)
- 16
- Transair part no.6668 25 22GR
- Description
- Fitting Ball Valve For 25mm
- Working pressure (bar)
- 16
- Transair part no.6668 40 22GR
- Description
- Fitting Ball Valve For 38.10mm
- Working pressure (bar)
- 16
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Transair fitting ball valve used for?▾
How do I read Transair part numbers such as 6679 25 22GR and 6668 25 22GR?▾
Which tube sizes does the Transair ball valve fit?▾
What are the different Transair ball valve part numbers 6679, 6694 and 6668?▾
What pressure and temperature does the Transair ball valve have?▾
What is the Transair ball valve made from?▾
Which documents are available for the Transair ball valve?▾
What does the Transair ball valve connect to?▾
How do I install the Transair ball valve?▾
How does the Transair ball valve differ from the Transair elbow?▾
Where is the Transair ball valve made and how is it exported?▾
Do you stock Transair ball valve fittings in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
Sizing pneumatic valves: Cv, Kv, sonic conductance and matching a valve to a cylinder
What Cv, Kv and the ISO 6358 sonic conductance C and critical pressure ratio b each tell you, why Cv alone can mislead on air, how to work out the flow a cylinder needs and the valve Cv to deliver it using Parker’s published method, and how ISO 5599-1 plug-in valves differ from maker manifolds — including common vs individual exhaust.
13 min read
Pneumatics & compressed air
Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder
A push-in fitting grips the tube with a toothed collet and seals on its outside diameter with an O-ring — so the tube cut, the tube size and the thread end decide whether it holds. How push-in fittings work, fitting and releasing tube, pressure and temperature limits by maker, NPT vs BSPT vs BSPP, and how sintered bronze, plastic and speed-control mufflers affect exhaust back-pressure and cylinder speed.
12 min read








