Tompkins 5406-FLP Male NPTF Flush Plug
Category image · Hoses & FittingsTompkins 5406-FLP male NPTF flush plug, carbon steel: 4 sizes, 1/8-27 NPTF to 1/2-14 NPTF.
Key features
- Fitting Configuration: Plug
- Nominal Size Range: 1/8-27 NPTF to 1/2-14 NPTF
- Fitting Configuration
- Plug
Product description
The Tompkins 5406-FLP is a carbon steel male NPTF flush plug from Tompkins Industries' hydraulic adapter range, in 4 sizes from 1/8-27 NPTF to 1/2-14 NPTF.
Specification
- Configuration: Male NPTF Flush Plug (plug)
- Material: Carbon steel
- End A: Male NPTF
- Sizes: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists each Tompkins number with its thread. Tompkins numbers give the style code, then the dash size of each end in the order the ends are named.
Choosing and fitting
Match each end to the port or tube it meets: JIC 37° and SAE O-ring boss share UNF threads at the same dash size but seal differently (37° flare vs an O-ring on the boss), and ORFS seals on an O-ring in the face. Check the thread before installing; never mix sealing types on one joint.
How to order
Quote the Tompkins part number, or the end types and dash sizes. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | Plug |
| Style | Male NPTF Flush Plug |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/8-27 NPTF to 1/2-14 NPTF |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
Shipping & lead time
Sizes & part numbers
4 sizes| Tompkins part no. | Thread |
|---|---|
| 5406-FLP-02 | 1/8-27 NPTF |
| 5406-FLP-04 | 1/4-18 NPTF |
| 5406-FLP-06 | 3/8-18 NPTF |
| 5406-FLP-08 | 1/2-14 NPTF |
What sizes is the Tompkins 5406-FLP made in?▾
Is it carbon steel or stainless?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Verschlussstopfen
- fr
- bouchon mâle
- es
- tapón macho
- it
- tappo
From the blog
Written about this range
Failure analysis
Using sealant on hydraulic threads: which joints want it, and which are ruined by it
Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.
3 min read
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read
Thread & fitting identification
NPT, NPSM and SAE hose fittings: taper, swivel, flare and O-ring boss
Five American hose-end families that get confused because they share inch sizes. Which seals on the thread, which on a cone, which on an O-ring — and how to tell NPT from NPSM before it leaks.
4 min read
Engineers viewing this also looked at
Tompkins 5406-HHP Male NPTF Hollow Hex Plug
Tompkins 5500-S Male NPTF × Male NPTF Swivel 90° Elbow
Tompkins 5502-S Male NPTF Swivel × Female NPTF 90° Elbow
Female Cross NPT
Branch Tee Connector f NPT X m NPT X f NPT
Male Tee NPT
Run Tee Connector f NPT X f NPT X m NPT
