Tompkins 2501-S Male JIC 37° × Male NPTF Swivel 90° Elbow
Tompkins 2501-S male JIC 37° × male NPTF swivel 90° elbow, swivel, carbon steel: 7 sizes, 7/16-20 JIC upward.
Key features
- Fitting Configuration: 90° elbow, swivel
- Fitting Configuration
- 90° elbow, swivel
Product description
The Tompkins 2501-S is the swivel version of the 2501, with a swivel nut on one end so it can be aligned without turning the body: male JIC 37° × male NPTF swivel 90° elbow, carbon steel, in 7 sizes.
Specification
- End A: Male JIC 37°
- End B: Male NPTF Swivel
- Form: swivel, 90° elbow
- Material: carbon steel
- Sizes: 7
When to use it
Use the swivel version where the fitting has to be lined up after the other end is tight, so the line does not have to be twisted into place.
How to order
Quote the Tompkins part number, or the end types and dash sizes. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | 90° elbow, swivel |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
Shipping & lead time
Sizes & part numbers
7 sizes| Tompkins part no. | End 1 | End 2 |
|---|---|---|
| 2501-S-04-04 | 7/16-20 JIC | 1/4-18 NPTF |
| 2501-S-06-04 | 9/16-18 JIC | 1/4-18 NPTF |
| 2501-S-06-06 | 9/16-18 JIC | 3/8-18 NPTF |
| 2501-S-08-06 | 3/4-16 JIC | 3/8-18 NPTF |
| 2501-S-08-08 | 3/4-16 JIC | 1/2-14 NPTF |
| 2501-S-10-08 | 7/8-14 JIC | 1/2-14 NPTF |
| 2501-S-12-12 | 1-1/16-12 JIC | 3/4-14 NPTF |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
How is the 2501-S different from the standard 2501?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Thread & fitting identification
Fittings on American machines: the inch families, and what travels with them
JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read
Failure analysis
Why a new hose assembly weeps, and what to check before blaming the crimp
A hose fitted this morning is damp by the afternoon. The crimp is the last thing to suspect, not the first — and there are five checks ahead of it that take a minute each.
6 min read
Engineers viewing this also looked at
Tompkins 6400-L Male JIC 37° × Male O-Ring Boss Connector, Long
Tompkins 6510 Female JIC 37° Swivel × Female JIC 37° Swivel Union
Tompkins 6606 Female JIC 37° Swivel Run Tee
Tompkins 6801-L Male JIC 37° × Male O-Ring Boss Adjustable 90° Elbow, Long
Tompkins 6801-LL Male JIC 37° × Male O-Ring Boss Adjustable 90° Elbow, Extra Long
Tompkins 6801-LLL Male JIC 37° × Male O-Ring Boss Adjustable 90° Elbow, Extra-Extra Long
Tompkins 6801-S Male JIC 37° × Male O-Ring Boss Swivel Adjustable 90° Elbow
