Thread Adaptor BSP ED Seal
Thread Adaptor BSP ED Seal — BSP family straight for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: straight
- Port A Thread: BSPP G1/8 to G2 with ED seal
- Port A Sealing: ed-seal
- Nominal Size Range: G1/8 to G2
- Max Working Pressure: up to 400 bar at smaller sizes; derates with size
- Body Configuration
- straight
- Port A Thread
- BSPP G1/8 to G2 with ED seal
- Port A Sealing
- ed-seal
- Nominal Size Range
- G1/8 to G2
- Max Working Pressure
- up to 400 bar at smaller sizes; derates with size
Product description
The Thread Adaptor BSP ED Seal is a Straight hydraulic adapter in the BSP family. Thread Adaptor BSP ED Seal — BSP family straight for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Straight
- Port A: Male — BSPP G1/8 to G2 with ED seal (Elastomeric ED seal)
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
up to 400 bar at smaller sizes; derates with size. BSP family — British Standard Pipe — ISO 228-1 (BSPP, parallel) and ISO 7-1 (BSPT, taper). BSPP requires a separate seal (bonded-seal washer, ED seal, 60° cone, or flat-face); BSPT is taper-on-taper self-sealing.
Applicable Standards
- ISO 228-1 (BSPP)
- ISO 7-1 (BSPT)
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | straight |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | BSPP G1/8 to G2 with ED seal |
| Port A Sealing | ed-seal |
| Port A Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | G1/8 to G2 |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 400 bar at smaller sizes; derates with size |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228-1 (BSPP), ISO 7-1 (BSPT) |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | End 1 | End 2 | S1 (mm) | L (mm) | L1 (mm) | L2 (mm) |
|---|---|---|---|---|---|---|
| IH-AD-BSP-020-02WD | G1/8"X28 | G1/8"X28 | 14 | 25.5 | 10 | 8 |
| IH-AD-BSP-020-04WD | G1/4"X19 | G1/4"X19 | 19 | 32 | 12 | 12 |
| IH-AD-BSP-020-06WD | G3/8"X19 | G3/8"X19 | 22 | 34 | 13.5 | 12 |
| IH-AD-BSP-020-08WD | G1/2"X14 | G1/2"X14 | 27 | 43 | 16 | 14 |
| IH-AD-BSP-020-12WD | G3/4"X14 | G3/4"X14 | 32 | 46.5 | 18.5 | 16 |
| IH-AD-BSP-020-16WD | G1"X11 | G1"X11 | 41 | 54.5 | 20.5 | 18 |
| IH-AD-BSP-020-20WD | G1.1/4"X11 | G1.1/4"X11 | 50 | 58.5 | 20.5 | 20 |
| IH-AD-BSP-020-24WD | G1.1/2"X11 | G1.1/2"X11 | 55 | 63 | 23 | 22 |
| IH-AD-BSP-020-32WD | G2"X11 | G2"X11 | 75 | 66.5 | 25.5 | 22 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What thread family does this adapter use?▾
What are the port specs?▾
What sizes are available?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Is this adapter interchangeable with other thread families?▾
Do I need to crimp this onto a hose?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Failure analysis
Cross-threaded or stripped port: repair it, insert it, or replace the block
What is recoverable depends on something most people never think about: whether that port seals on the thread or somewhere else. Get that question right and the decision makes itself.
5 min read
Thread & fitting identification
BSPP bonded seals and dowty washers: getting the size right
A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.
5 min read
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read
Engineers viewing this also looked at
Male Female Thread Elbow
Swivel Nut Union
Swivel Male Stud BSPT
Swivel Male Elbow NPT
Swivel Male Stud NPT
Swivel Male 45° Elbow
Bulkhead Union
