Skip to content
SUN HYDRAULICSIH-SUN-FP-K

Sun Hydraulics Pilot-Operated, Normally Closed, Electro-Proportional Throttle with Reverse Flow Check — FPFK, FPHK, Series 2 to 3

Flow Control CartridgesEx-stock · delivery in 3 days
Sun Hydraulics FPHK pilot-operated electro-proportional throttle, series 3, T-16A cavity — dimension drawing
VIEW 01·Sun Hydraulics FPHK pilot-operated electro-proportional throttle, series 3, T-16A cavity — dimension drawing
1 / 3

Sun Hydraulics pilot-operated electro-proportional throttle: FPFK, FPHK, series 2 to 3, 20 gpm to 60 gpm (80 L/min to 240 L/min), T-5A, T-16A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Pilot-Operated Electro-Proportional Throttle
  • Capacity: 20 gpm to 60 gpm (80 L/min to 240 L/min)
  • Cavity: T-5A, T-16A
Valve function
Pilot-Operated Electro-Proportional Throttle
Series (frame sizes)
2 to 3
Cavity
T-5A, T-16A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-operated proportional throttle with a poppet main stage: the coil acts on a small pilot that opens or closes the main poppet in proportion to current. Normally closed and normally open versions exist, with or without a free-flow reverse check; FLeX Series models are built for XMD drivers.

Sizes and cavities

Sun Hydraulics builds this valve in 2 sizes. The series sets the cavity it screws into and its flow capacity:

  • FPFK — series 2, T-5A cavity, 20 gpm (80 L/min)
  • FPHK — series 3, T-16A cavity, 60 gpm (240 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum leakage: 20 drops/min.@5000 psi

Configuration options

The letters after the base model code choose these options (shown for FPHK; a size may add or drop a choice):

  • Control: X — No Manual Override, E — Twist (Extended) Manual Override, M — Manual Override
  • Seal material: N — Buna-N, L — Extended Temp. Buna, V — Viton, E — EPDM

Option rules: If the coil is in this group (HN24AA, HN24AB), the control must be M or X; If the seal is E, the control must be E,M or X.

Selection notes

  • Very low leakage in the closed position.
  • Without the check, reverse flow closes the valve and only pilot flow passes.
  • FLeX Series versions are cycle-tested to 10 million operations.

Where it is used

Leak-tight proportional control of mobile functions — lowering, slewing and lift circuits.

Installation and seal kits

Valve hex 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm). Replacement seal kits — series 2: Buna: 990203007, EPDM: 990203014, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FPHKXCN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionPilot-Operated Electro-Proportional Throttle
Series (frame sizes)2 to 3
CavityT-5A, T-16A

Performance

ParameterValue
Capacity20 gpm to 60 gpm (80 L/min to 240 L/min)
Max leakage20 drops/min.@5000 psi

Configuration

ParameterValue
Control / adjustmentX — No Manual Override, E — Twist (Extended) Manual Override, M — Manual Override
Seal materialN — Buna-N, L — Extended Temp. Buna, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm)
Installation torque45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm)
Seal kitsseries 2: Buna: 990203007, EPDM: 990203014, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006
Weight.70 lb (0,30 kg) to 1.50 lb (0,70 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at