Sun Hydraulics 3-Way, Direct-Acting, Fixed Setting, Directional Valve with Drain to Port 4 (1 Blocked, 2 to 3 Open) — DRBOX

Sun Hydraulics 3-Way, Direct-Acting, Fixed Setting, Directional Valve with Drain to Port 4 (1 Blocked, 2 to 3 Open): DRBOX, series 1, 7 gpm (28 L/min), T-21A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Direct-Acting Pressure-Operated Directional Valve
- Capacity: 7 gpm (28 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-21A
- Valve function
- Direct-Acting Pressure-Operated Directional Valve
- Series (frame sizes)
- 1
- Cavity
- T-21A
Product description
A directional cartridge switched by pressure rather than a solenoid: it shifts once the pressure difference between port 1 and the drain passes its spring setting. It can switch a moderate flow itself or pilot a larger directional or logic cartridge. Being direct-acting, it leaks little and uses almost no pilot flow.
This version
- At rest: 1 blocked; 2 to 3 open.
- The spring chamber drains to a separate port 4, so pressure at port 3 does not shift the setting and port 3 can work as a load port.
- Fixed setting: the shift pressure is set at the factory to the value you order.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- DRBOX — series 1, T-21A cavity, 7 gpm (28 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 2 in³/min. (30 cc/min)
Configuration options
The letters after the base model code choose these options (shown for DRBOX; a size may add or drop a choice):
- Setting range: F — 100 psi (7 bar)
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Selection notes
- It can modulate between positions; it is not a snap-acting switch.
- For series 1 valves with a panel-mount handknob, cut a 0.75 in (19 mm) hole in the panel.
Where it is used
Pressure-sequenced switching — unloading, high-low pump circuits, interlocks, piloting logic elements.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DRBOXFN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 7 gpm (28 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | F — 100 psi (7 bar) |
| Max leakage | 2 in³/min. (30 cc/min) |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006 |
| Weight | .55 lb (0,25 kg) |
Identification
| Parameter | Value |
|---|---|
| Valve function | Direct-Acting Pressure-Operated Directional Valve |
| Series (frame sizes) | 1 |
| Cavity | T-21A |
Configuration
| Parameter | Value |
|---|---|
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.DRBOX
- Series
- 1
- Cavity
- T-21A
- Capacity
- 7 gpm / 28 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics DRBOX direct-acting pressure-operated directional valve used for?▾
Which sizes and versions does the Sun Hydraulics DRBOX direct-acting pressure-operated directional valve come in?▾
How do I read the Sun Hydraulics model code DRBOXFN for the DRBOX direct-acting pressure-operated directional valve?▾
What is the maximum operating pressure of the Sun Hydraulics DRBOX direct-acting pressure-operated directional valve?▾
What flow capacity does the DRBOX direct-acting pressure-operated directional valve have?▾
Which seal materials and body finishes does the Sun Hydraulics DRBOX direct-acting pressure-operated directional valve come with?▾
Which cavity does the Sun Hydraulics DRBOX direct-acting pressure-operated directional valve fit?▾
Which seal kit fits the Sun Hydraulics DRBOX direct-acting pressure-operated directional valve?▾
How is the Sun Hydraulics DRBOX direct-acting pressure-operated directional valve installed?▾
Where is the Sun Hydraulics DRBOX direct-acting pressure-operated directional valve used?▾
Sun Hydraulics DRBOX or DRBMX: what is the difference?▾
Do you stock the Sun Hydraulics DRBOX in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








