Skip to content
SUN HYDRAULICSIH-SUN-DNBF

Sun Hydraulics FLeX Series 4-Way, 2-Position, Solenoid-Operated Directional Spool Valve — DNBF

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DNBF 4-way solenoid-operated directional spool valve, series 0, T-30A cavity — dimension drawing
VIEW 01·Sun Hydraulics DNBF 4-way solenoid-operated directional spool valve, series 0, T-30A cavity — dimension drawing
1 / 3

Sun Hydraulics FLeX Series 4-Way, 2-Position, Solenoid-Operated Directional Spool Valve: DNBF, series 0, 4 gpm (15 L/min), T-30A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 4-Way Solenoid-Operated Directional Spool Valve
  • Capacity: 4 gpm (15 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-30A
Valve function
4-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)
0
Cavity
T-30A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting, balanced-spool 4-way valve — the cartridge equivalent of a small directional valve. Two-position versions have one coil and a choice of spools; three-position versions have a coil at each end and centre on springs. No minimum pressure is needed to shift.

This version

  • FLeX Series: tested to 10 million cycles at full rated pressure and zinc-nickel plated as standard for 1,000 hours of salt-fog protection.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DNBF — series 0, T-30A cavity, 4 gpm (15 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Typical response time: 50 ms
  • Switching frequency: 15,000 max. cycles/hr

Configuration options

The letters after the base model code choose these options (shown for DNBF; a size may add or drop a choice):

  • Control: P — Manual Pull Override, X — No Manual Override
  • Spool / poppet configuration: C — Closed, Shift to Through, D — Closed, Shift to Cross, E — Cross, Shift to Closed, N — Through, Shift to Cross, T — Tandem, Shift to Through, V — Cross, Shift to Tandem
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Coil: 44 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof

Option rules: If the coil is in this group (211, 212, 212D, 214, 214D, 223, 224, 224D, 228, 228D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 912, 912D, 914, 914D, 924, 924D, 928, 928D, JM24BD, JM24CD, JN24BD, JN24CD), the range must be C, D, E, N, T or V; If the coil is in this group (612), the range must be C, D, V, E, N or T; If the coil is in this group (612D), the range must be C, E, D, N, T or V; If the seal is E, the range must be C or N.

Selection notes

  • Spool options set the flow paths in each position — closed, open, through, cross; choose from the configuration letters.
  • Manual override options (push, detent twist-lock, momentary twist) are chosen in the code.

Where it is used

Double-acting cylinders and motors, and pilot control of larger directional cartridges.

Installation and seal kits

Hex 3/4 in. (19,1 mm); installation torque 25 - 30 lbf ft (35 - 40 Nm). Replacement seal kits — series 0: Buna: 990030007, Viton: 990030006. Coil seal and nut kit: Viton: 990740006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DNBFXNN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve function4-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)0
CavityT-30A

Performance

ParameterValue
Capacity4 gpm (15 L/min)
Max operating pressure5000 psi (350 bar)

Configuration

ParameterValue
Control / adjustmentP — Manual Pull Override, X — No Manual Override; C — Closed, Shift to Through, D — Closed, Shift to Cross, E — Cross, Shift to Closed, N — Through, Shift to Cross, T — Tandem, Shift to Through, V — Cross, Shift to Tandem
Seal materialN — Buna-N, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm)
Installation torque25 - 30 lbf ft (35 - 40 Nm)
Seal kitsseries 0: Buna: 990030007, Viton: 990030006
Weight.65 lb (0,30 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at