Skip to content
SUN HYDRAULICSIH-SUN-DNCA

Sun Hydraulics 4-Way, 2-Position, Solenoid-Operated Directional Spool Valve with Closed Transition — DNCA

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DNCA 4-way solenoid-operated directional spool valve, series 1, T-31A cavity — dimension drawing
VIEW 01·Sun Hydraulics DNCA 4-way solenoid-operated directional spool valve, series 1, T-31A cavity — dimension drawing
1 / 3

Sun Hydraulics 4-Way, 2-Position, Solenoid-Operated Directional Spool Valve with Closed Transition: DNCA, series 1, 8 gpm (30 L/min), T-31A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 4-Way Solenoid-Operated Directional Spool Valve
  • Capacity: 8 gpm (30 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-31A
Valve function
4-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)
1
Cavity
T-31A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting, balanced-spool 4-way valve — the cartridge equivalent of a small directional valve. Two-position versions have one coil and a choice of spools; three-position versions have a coil at each end and centre on springs. No minimum pressure is needed to shift.

This version

  • Closed transition: ports stay blocked while the spool crosses over, so little oil is lost when it shifts — useful in pilot circuits.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DNCA — series 1, T-31A cavity, 8 gpm (30 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 10 in³/min.@3000 psi (160 cc/min.@210 bar)
  • Typical response time: 50 ms
  • Switching frequency: 15,000 max. cycles/hr

Configuration options

The letters after the base model code choose these options (shown for DNCA; a size may add or drop a choice):

  • Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override
  • Spool / poppet configuration: C — Closed, Shift to Through, X — Cross, Shift to Through, A — A to T, Shift to Through, B — B to T, Shift to Through, J — Open, Shift to Through, L — Cross, Shift to P to A, B and T Blocked, S — Regen, Shift to Through, T — Tandem, Shift to Through, W — A and B Bleed to T, Shift to Through, Z — Motor, Shift to Through
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Coil: 24 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, Deutsch DT04-6P, Metri-Pack, Deutsch DT04-2P, Explosion Proof, with embedded driver

Option rules: If the coil is in this group (HN24AA, HN24AB), the control must be M or X; If the seal is E, the control must be D,L,M,T or X.

Selection notes

  • Spool options set the flow paths in each position — closed, open, through, cross; choose from the configuration letters.
  • Manual override options (push, detent twist-lock, momentary twist) are chosen in the code.

Where it is used

Double-acting cylinders and motors, and pilot control of larger directional cartridges.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990431007, EPDM: 990431014, Viton: 990431006. Coil seal and nut kit: Viton: 990770006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DNCAXXN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve function4-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)1
CavityT-31A

Performance

ParameterValue
Capacity8 gpm (30 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage10 in³/min.@3000 psi (160 cc/min.@210 bar)

Configuration

ParameterValue
Control / adjustmentD — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override; C — Closed, Shift to Through, X — Cross, Shift to Through, A — A to T, Shift to Through, B — B to T, Shift to Through, J — Open, Shift to Through, L — Cross, Shift to P to A, B and T Blocked, S — Regen, Shift to Through, T — Tandem, Shift to Through, W — A and B Bleed to T, Shift to Through, Z — Motor, Shift to Thr
Seal materialN — Buna-N, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990431007, EPDM: 990431014, Viton: 990431006
Weight.60 lb (0,30 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at