Skip to content
SUN HYDRAULICSIH-SUN-DMDAS

Sun Hydraulics 3-Way, Soft Shift, Solenoid-Operated Directional Spool Valve — DMDAS

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DMDAS 3-way solenoid-operated directional spool valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics DMDAS 3-way solenoid-operated directional spool valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics 3-Way, Soft Shift, Solenoid-Operated Directional Spool Valve: DMDAS, series 1, 5 gpm (20 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 3-Way Solenoid-Operated Directional Spool Valve
  • Capacity: 5 gpm (20 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A
Valve function
3-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)
1
Cavity
T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting, balanced-spool 3-way, 2-position valve. It switches a common port between two others with no minimum pressure, and its flow paths work in both directions.

This version

  • Soft shift: slower switching to cut the pressure spike, with a longer response time and lower flow limits than the standard valve, which it replaces in the same cavity.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DMDAS — series 1, T-11A cavity, 5 gpm (20 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 5 in³/min.@3000 psi (80 cc/min.@210 bar)

Configuration options

The letters after the base model code choose these options (shown for DMDAS; a size may add or drop a choice):

  • Spool / poppet configuration: A — Normally Open 1 to 2, Closed 2 to 3, N — Normally Open 2 to 3, Closed 1 to 2, B — Normally Open 1 to 2, Closed 2 to 3, Closed Transition, P — Normally Open 1 to 3, Closed 1 to 2, R — Normally Open 2 to 3, Closed 1 to 2, Closed Transition
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Material / coating: /LH — Mild Steel, Zinc-Nickel
  • Coil: 24 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, Deutsch DT04-6P, Metri-Pack, Deutsch DT04-2P, Explosion Proof, with embedded driver

Selection notes

  • The pilot-capacity versions are sized to pilot other valves and leak under 10 drops a minute at 5,000 psi.
  • The solenoid tube is fatigue-rated for 5,000 psi (350 bar) unless the title gives a lower rating.

Where it is used

Single-acting cylinders, pilot signals to logic elements and main stages, selecting between two pressures.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990411007, EPDM: 990411014, Viton: 990411006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DMDASNN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve function3-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)1
CavityT-11A

Performance

ParameterValue
Capacity5 gpm (20 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage5 in³/min.@3000 psi (80 cc/min.@210 bar)

Configuration

ParameterValue
Control / adjustmentA — Normally Open 1 to 2, Closed 2 to 3, N — Normally Open 2 to 3, Closed 1 to 2, B — Normally Open 1 to 2, Closed 2 to 3, Closed Transition, P — Normally Open 1 to 3, Closed 1 to 2, R — Normally Open 2 to 3, Closed 1 to 2, Closed Transition
Seal materialN — Buna-N, V — Viton, E — EPDM
Material / coating/LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990411007, EPDM: 990411014, Viton: 990411006
Weight.60 lb (0,30 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at