Skip to content
SUN HYDRAULICSIH-SUN-DMTA

Sun Hydraulics 3-Way, Direct-Acting, Balanced Spool, Solenoid-Operated Directional Valve, 3600 psi (250 bar) — DMTA

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DMTA direct-acting solenoid-operated valve for common cavities, series 0C, SC-08-03 cavity — dimension drawing
VIEW 01·Sun Hydraulics DMTA direct-acting solenoid-operated valve for common cavities, series 0C, SC-08-03 cavity — dimension drawing
1 / 3

Sun Hydraulics 3-Way, Direct-Acting, Balanced Spool, Solenoid-Operated Directional Valve, 3600 psi (250 bar): DMTA, series 0C, 4 gpm (15 L/min), SC-08-03 cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Direct-Acting Solenoid-Operated Valve For Common Cavities
  • Capacity: 4 gpm (15 L/min)
  • Max operating pressure: 3600 psi (250 bar)
  • Cavity: SC-08-03
Valve function
Direct-Acting Solenoid-Operated Valve For Common Cavities
Series (frame sizes)
0C
Cavity
SC-08-03
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting solenoid cartridge built for the industry-standard SC-08 and SC-10 style cavities rather than Sun's own T-series cavities. The solenoid moves a balanced spool or poppet directly, so no minimum pressure is needed.

This version

  • At rest: 250 bar.
  • Fits an industry-standard common cavity (SC-08 / SC-10 type) rather than a Sun T-series cavity.
  • Rated to 3600 psi (250 bar).

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DMTA — series 0C, SC-08-03 cavity, 4 gpm (15 L/min), Common cavity

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series 0C and 1C parts fit industry-standard common cavities (SC-08, SC-10) instead of Sun's T-series cavities.

Ratings

  • Maximum operating pressure: 3600 psi (250 bar)
  • Typical response time: 50 ms

Configuration options

The letters after the base model code choose these options (shown for DMTA; a size may add or drop a choice):

  • Control: L — Manual Override (Push with Detent), X — No Manual Override
  • Spool / poppet configuration: A — Normally Open 1 to 2, Closed 1 to 3, H — Normally Open 1 to 2, Closed 1 to 3, N — Normally Open 2 to 3, Closed 1 to 2, P — Normally Open 1 to 3, Closed 1 to 2
  • Seal material: N — Buna-N
  • Coil: 4 coil choices, or no coil — 12 VDC, 24 VDC; connections include DIN 43650-Form A, Deutsch DT04-2P

Selection notes

  • Pressure ratings are lower than Sun's T-cavity valves — check the rating in the title.
  • Respect the installation torque in the specifications for best performance.

Where it is used

Replacing or standardising solenoid cartridges in common-cavity manifolds on mobile machines.

Installation and seal kits

Hex 24 mm; installation torque 21 - 23 lbf ft (28 - 31 Nm). Replacement seal kits — series 0C: Buna: 99C083007, Viton: 99C083006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DMTAXAN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionDirect-Acting Solenoid-Operated Valve For Common Cavities
Series (frame sizes)0C
CavitySC-08-03

Performance

ParameterValue
Capacity4 gpm (15 L/min)
Max operating pressure3600 psi (250 bar)

Configuration

ParameterValue
Control / adjustmentL — Manual Override (Push with Detent), X — No Manual Override; A — Normally Open 1 to 2, Closed 1 to 3, H — Normally Open 1 to 2, Closed 1 to 3, N — Normally Open 2 to 3, Closed 1 to 2, P — Normally Open 1 to 3, Closed 1 to 2
Seal materialN — Buna-N

Installation

ParameterValue
Valve hex size24 mm
Installation torque21 - 23 lbf ft (28 - 31 Nm)
Seal kitsseries 0C: Buna: 99C083007, Viton: 99C083006
Weight.40 lb (0,20 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at