Sun Hydraulics 2-Way, Solenoid-Operated Directional Spool Valve with Position Switch — DLDAZ

Sun Hydraulics 2-Way, Solenoid-Operated Directional Spool Valve with Position Switch: DLDAZ, series 1, 12 gpm (45 L/min), T-13A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: 2-Way Direct-Acting Solenoid-Operated Spool Valve
- Capacity: 12 gpm (45 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-13A
- Valve function
- 2-Way Direct-Acting Solenoid-Operated Spool Valve
- Series (frame sizes)
- 1
- Cavity
- T-13A
Product description
A direct-acting, balanced-spool 2-way valve. The solenoid moves the spool against its spring, with no minimum pressure needed, and the balanced spool switches the same way whatever the pressure at its ports.
This version
- A position switch confirms the valve is in its spring position. The assembly is sealed and factory-set — not field-serviceable — and needs a crow's-foot wrench to torque in.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- DLDAZ — series 1, T-13A cavity, 12 gpm (45 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 5 in³/min.@3000 psi (80 cc/min.@210 bar)
- Typical response time: 50 ms
- Switching frequency: 15,000 max. cycles/hr
Configuration options
The letters after the base model code choose these options (shown for DLDAZ; a size may add or drop a choice):
- Spool / poppet configuration: C — Normally Closed, H — Normally Open
- Seal material: N — Buna-N, V — Viton
- Coil: 12 coil choices, or no coil — 12 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, Metri-Pack, Deutsch DT04-2P
Selection notes
- Normally open or normally closed, chosen in the code.
- A spool valve leaks more than a poppet; use a poppet valve for load holding.
Where it is used
On/off control of moderate flows and pilot control of larger cartridges.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990413007, Viton: 990413006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DLDAZCN224 — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | 2-Way Direct-Acting Solenoid-Operated Spool Valve |
| Series (frame sizes) | 1 |
| Cavity | T-13A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 12 gpm (45 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 5 in³/min.@3000 psi (80 cc/min.@210 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | C — Normally Closed, H — Normally Open |
| Seal material | N — Buna-N, V — Viton |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990413007, Viton: 990413006 |
| Weight | .50 lb (0,25 kg) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.DLDAZ
- Series
- 1
- Cavity
- T-13A
- Capacity
- 12 gpm / 45 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve and what does it do?▾
How do I read the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve model code and its option letters?▾
What flow, series and cavity does the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve have?▾
How is the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve configured, and what should I check before choosing it?▾
What pressure, leakage and response ratings does the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve have?▾
What seal materials and coil voltages does the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve offer?▾
Which cavity does the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve fit?▾
Does the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve come with a coil, and what do I need to run it?▾
What torque and seal kits apply to the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve?▾
Where is the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve used?▾
How does the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve differ from the Sun DMDAZ?▾
Is the Sun DLDAZ 2-way direct-acting solenoid-operated spool valve in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








