Steel Pulley with Hook Open Type
Steel Pulley with Hook Open Type, in 3 sizes, 140 mm to 220 mm, WLL 2 to 5 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Steel Pulley with Hook Open Type
- Size range: 140 mm to 220 mm
- Working load limit: 2 to 5 t
- Size range
- 140 mm to 220 mm
- Working load limit
- 2 to 5 t
- Material
- Carbon steel
- Finish
- Red painted
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull. Carbon steel, red painted.
Sizes and ratings
3 sizes, 140 mm to 220 mm. Working load limit 2 to 5 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Forged.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Steel Pulley with Hook Open Type |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 140 mm to 220 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 2 to 5 t |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Red painted |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes| Indus part no. | Size | Rope size | WLL (t) | Weight (kg) |
|---|---|---|---|---|
| IH-LR-BP-PHO-140MM | 140 mm | 10 mm | 2 | 6.5 |
| IH-LR-BP-PHO-180MM | 180 mm | 12 mm | 3.2 | 12 |
| IH-LR-BP-PHO-220MM | 220 mm | 16 mm | 5 | 23 |
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the steel pulley with hook open type come in?▾
What is the working load limit?▾
Can a snatch block be used for lifting?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Pulley with Loose Hook, Red Painted
Plastic Nylon Pulley
Plain Pulley Block
Steel Pulley Single Sheave, ST Type
Steel Pulley with Single Sheave Red Painted Type 5
Steel Pulley — Types 03 to 08
Rigging Block with D Shackle
