Steel Pulley Block, Open Shell — 7311 Series, 0.25–6 t WLL

Steel Pulley Block, Open Shell, in 54 sizes, 2″ to 12″, WLL 0.25 to 6 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Steel Pulley Block, Open Shell
- Size range: 2″ to 12″
- Working load limit: 0.25 to 6 t
- Size range
- 2″ to 12″
- Working load limit
- 0.25 to 6 t
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull.
Sizes and ratings
54 sizes, 2″ to 12″. Working load limit 0.25 to 6 t. Available as: single sheave, eye, single sheave, hook, double sheave, eye, double sheave, hook, triple sheave, eye, triple sheave, hook. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Steel Pulley Block, Open Shell |
| Sizes | 54 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 2″ to 12″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.25 to 6 t |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
54 sizes- Indus part no.IH-LR-BP-PBOS7311-200-SSE
- Size
- 2″
- Type
- Single sheave, eye
- Rope size
- 6mm
- WLL (t)
- 0.25
- A (mm)
- 58
- B (mm)
- 32
- C (mm)
- 11
- L (mm)
- 217
- Ø (mm)
- 49
- Weight (kg)
- 0.55
- Indus part no.IH-LR-BP-PBOS7311-300-SSE
- Size
- 3″
- Type
- Single sheave, eye
- Rope size
- 8mm
- WLL (t)
- 0.5
- A (mm)
- 81
- B (mm)
- 44.5
- C (mm)
- 13
- L (mm)
- 268
- Ø (mm)
- 70.5
- Weight (kg)
- 1.15
- Indus part no.IH-LR-BP-PBOS7311-400-SSE
- Size
- 4″
- Type
- Single sheave, eye
- Rope size
- 10mm
- WLL (t)
- 1
- A (mm)
- 112
- B (mm)
- 51
- C (mm)
- 16
- L (mm)
- 330
- Ø (mm)
- 97
- Weight (kg)
- 2
- Indus part no.IH-LR-BP-PBOS7311-500-SSE
- Size
- 5″
- Type
- Single sheave, eye
- Rope size
- 13mm
- WLL (t)
- 1.5
- A (mm)
- 140
- B (mm)
- 55
- C (mm)
- 17
- L (mm)
- 400
- Ø (mm)
- 125
- Weight (kg)
- 3.2
- Indus part no.IH-LR-BP-PBOS7311-600-SSE
- Size
- 6″
- Type
- Single sheave, eye
- Rope size
- 16mm
- WLL (t)
- 2
- A (mm)
- 168
- B (mm)
- 75
- C (mm)
- 22
- L (mm)
- 460
- Ø (mm)
- 146
- Weight (kg)
- 4.6
- Indus part no.IH-LR-BP-PBOS7311-700-SSE
- Size
- 7″
- Type
- Single sheave, eye
- Rope size
- 19mm
- WLL (t)
- 3
- A (mm)
- 186
- B (mm)
- 81.5
- C (mm)
- 25
- L (mm)
- 505
- Ø (mm)
- 173
- Weight (kg)
- 7.8
- Indus part no.IH-LR-BP-PBOS7311-800-SSE
- Size
- 8″
- Type
- Single sheave, eye
- Rope size
- 22mm
- WLL (t)
- 4
- A (mm)
- 212
- B (mm)
- 81.5
- C (mm)
- 26
- L (mm)
- 535
- Ø (mm)
- 200
- Weight (kg)
- 10
- Indus part no.IH-LR-BP-PBOS7311-1000-SSE
- Size
- 10″
- Type
- Single sheave, eye
- Rope size
- 25mm
- WLL (t)
- 5
- A (mm)
- 276
- B (mm)
- 85
- C (mm)
- 28
- L (mm)
- 611
- Ø (mm)
- 250
- Weight (kg)
- 15
Show all 54 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ø — Dimension Ø on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Steel Pulley Block, Open Shell — 7311 Series used for?▾
How do I read Steel Pulley Block, Open Shell — 7311 Series part numbers such as IH-LR-BP-PBOS7311-200-SSE?▾
Which sizes does the Steel Pulley Block, Open Shell — 7311 Series come in?▾
How do I choose the right size of Steel Pulley Block, Open Shell — 7311 Series?▾
What is the rated capacity of the Steel Pulley Block, Open Shell — 7311 Series?▾
What material and finish does the Steel Pulley Block, Open Shell — 7311 Series have?▾
What standard and certificate apply to the Steel Pulley Block, Open Shell — 7311 Series?▾
Which parts connect to the Steel Pulley Block, Open Shell — 7311 Series?▾
How do I install and check the Steel Pulley Block, Open Shell — 7311 Series?▾
How does the Steel Pulley Block, Open Shell — 7311 Series compare with the Steel Pulley Block, Open Shell — 7111 / 7211 Series?▾
Can you export the Steel Pulley Block, Open Shell — 7311 Series from Dubai?▾
Is the Steel Pulley Block, Open Shell — 7311 Series available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Hammerverschraubung Typ 7311
- fr
- union à marteau type 7311
- es
- unión de martillo tipo 7311
- it
- giunto a martello tipo 7311
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








