Pulley Block without Safe Shelf Iron Sheave — 500–1,000 kg WLL

Pulley Block without Safe Shelf Iron Sheave, in 2 sizes, 5″ to 6″, WLL 500 to 1,000 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Pulley Block without Safe Shelf Iron Sheave
- Size range: 5″ to 6″
- Working load limit: 500 to 1,000 kg
- Size range
- 5″ to 6″
- Working load limit
- 500 to 1,000 kg
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull.
Sizes and ratings
2 sizes, 5″ to 6″. Working load limit 500 to 1,000 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Pulley Block without Safe Shelf Iron Sheave |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5″ to 6″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 500 to 1,000 kg |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-LR-BP-PBWSSIS-500
- Size
- 5″
- Rope size
- 24 mm
- WLL (kg)
- 500
- Weight (kg)
- 1.8
- Indus part no.IH-LR-BP-PBWSSIS-600
- Size
- 6″
- Rope size
- 26 mm
- WLL (kg)
- 1,000
- Weight (kg)
- 3
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Pulley Block without Safe Shelf Iron Sheave used for?▾
Which sizes of Pulley Block without Safe Shelf Iron Sheave are available?▾
How do I choose the right size of Pulley Block without Safe Shelf Iron Sheave?▾
What is the working load limit of the Pulley Block without Safe Shelf Iron Sheave?▾
How do I order a specific size of the Pulley Block without Safe Shelf Iron Sheave?▾
When should I choose the Pulley Block without Safe Shelf Iron Sheave instead of the Double Sheave Pulley Block?▾
What is the Pulley Block without Safe Shelf Iron Sheave made of?▾
Which standard does the Pulley Block without Safe Shelf Iron Sheave meet?▾
What can the Pulley Block without Safe Shelf Iron Sheave be connected to?▾
How do I inspect the Pulley Block without Safe Shelf Iron Sheave before use?▾
Where is the Pulley Block without Safe Shelf Iron Sheave typically used?▾
Can I buy the Pulley Block without Safe Shelf Iron Sheave from Indus ex-stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








