Stainless Steel NPT 45° Street Elbow
Stainless Steel NPT 45° Street Elbow in 316L stainless steel, forged. 9 part numbers, 1/8" to 2"; the size table gives the size on each end, dimensions in millimetres and the Parker equivalent for every Indus part number.
Key features
- Body Configuration: 45° street elbow
- Port A Thread: NPT, 1/8" to 2" (1/8-27 to 2-11.5)
- Port A Sealing: taper pipe thread that seals on the thread flanks, with sealant or tape
- Nominal Size Range: 1/8" to 2"
- Max Working Pressure: Up to 11,000 psi, falling with size (ASME B31.3 (NPT), manufacturer); see the table
- Body Configuration
- 45° street elbow
- Port A Thread
- NPT, 1/8" to 2" (1/8-27 to 2-11.5)
- Port A Sealing
- taper pipe thread that seals on the thread flanks, with sealant or tape
Product description
The Stainless Steel NPT 45° Street Elbow is a 45° street elbow in 316L stainless steel, forged from one piece. It carries an NPT male end and an NPT female end. Stainless steel is chosen where corrosion rules out zinc-plated carbon steel: offshore and marine lines, chemical, fertiliser and petroleum plant, and food, beverage and pharmaceutical process equipment.
Construction
- Body: 45° street elbow
- End 1: NPT male
- End 2: NPT female
- Material: 316L stainless steel, forged
Ends and sealing
- NPT: taper pipe thread that seals on the thread flanks, with sealant or tape; ASME B1.20.1.
Sizes
9 part numbers, 1/8" to 2". The Sizes & Part Numbers tab lists the size on each end, dimensions in millimetres and the Parker equivalent for every one.
- End 1: 1/8" NPT (1/8-27) to 2" NPT (2-11.5)
- End 2: 1/8" NPT (1/8-27) to 2" NPT (2-11.5)
Pressure rating
Manufacturer's published ratings (ASME B31.3 (NPT)), from 3,900 to 11,000 psi depending on size and end:
| Size designator | NPT size | Male (psig) | Male (bar) | Female (psig) | Female (bar) |
|---|---|---|---|---|---|
| 1 | 1/16 | 11000 | 757 | 6700 | 461 |
| 2 | 1/8 | 10000 | 689 | 6500 | 447 |
| 4 | 1/4 | 8000 | 551 | 6600 | 454 |
| 6 | 3/8 | 7800 | 537 | 5300 | 365 |
| 8 | 1/2 | 7700 | 530 | 4900 | 337 |
| 12 | 3/4 | 7300 | 502 | 4600 | 316 |
| 16 | 1 | 5300 | 365 | 4400 | 303 |
| 20 | 1 1/4 | 6000 | 413 | 5000 | 344 |
| 24 | 1 1/2 | 5000 | 344 | 4600 | 316 |
| 32 | 2 | 3900 | 268 | 3900 | 268 |
Parker equivalents
For 9 of the 9 sizes the size table gives the Parker part number the manufacturer cross-references, so a part number taken off existing equipment can be matched to the Indus part number.
Carbon-steel version
The same configuration in zinc-plated carbon steel: Steel NPTF 45° Street Elbow.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end and the material, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 45° street elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | NPT, 1/8" to 2" (1/8-27 to 2-11.5) |
| Port A Sealing | taper pipe thread that seals on the thread flanks, with sealant or tape |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPT, 1/8" to 2" (1/8-27 to 2-11.5) |
| Port B Sealing | taper pipe thread that seals on the thread flanks, with sealant or tape |
| Port B Gender | female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/8" to 2" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | Up to 11,000 psi, falling with size (ASME B31.3 (NPT), manufacturer); see the table |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel, forged |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ASME B1.20.1 |
Shipping & lead time
Sizes & part numbers
9 sizesEquivalent to Parker 1/2 CD45-SS / 1/4 CD45-SS, Aeroquip 259-2088 and SSP 1/#MF / #MF (SAE 140339). Every size below prints its equivalent part number beside ours — quote either.
| Indus part no. | Parker equivalent | Aeroquip equivalent | SSP equivalent | SAE no. | End 1 | End 2 | Y (mm) | D1 (mm) | D2 (mm) | M1 (mm) | M2 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-SS-5503-02-02 | 1/8 CD45-SS | 259-2088-2-2 | 1/8MF-45 | 140339 | 1/8" NPT (1/8-27) | 1/8" NPT (1/8-27) | 14.3 | 4.8 | 8.4 | 18.3 | 11.9 |
| IH-SS-5503-04-04 | 1/4 CD45-SS | 259-2088-4-4 | 1/4MF-45 | 140339 | 1/4" NPT (1/4-18) | 1/4" NPT (1/4-18) | 19 | 7.1 | 11.1 | 26.7 | 15.7 |
| IH-SS-5503-06-06 | 3/8 CD45-SS | 259-2088-6-6 | 3/8MF-45 | 140339 | 3/8" NPT (3/8-18) | 3/8" NPT (3/8-18) | 22.2 | 10.3 | 14.3 | 26.9 | 18.3 |
| IH-SS-5503-08-08 | 1/2 CD45-SS | 259-2088-8-8 | 1/2MF-45 | 140339 | 1/2" NPT (1/2-14) | 1/2" NPT (1/2-14) | 27 | 13.5 | 17.9 | 34 | 23.1 |
| IH-SS-5503-12-12 | 3/4 CD45-SS | 259-2088-12-12 | 3/4MF-45 | 140339 | 3/4" NPT (3/4-14) | 3/4" NPT (3/4-14) | 33.4 | 18.3 | 23 | 35.1 | 24.6 |
| IH-SS-5503-16-16 | 1 CD45-SS | 259-2088-16-16 | 1MF-45 | 140339 | 1" NPT (1-11.5) | 1" NPT (1-11.5) | 41.3 | 23.8 | 29 | 43.7 | 28.4 |
| IH-SS-5503-20-20 | 1 1/4 CD45-SS | 259-2088-20-20 | 1-1/4MF-45 | 140339 | 1-1/4" NPT (1-1/4-11.5) | 1-1/4" NPT (1-1/4-11.5) | 47.6 | 31.8 | 37.7 | 45.7 | 41.4 |
| IH-SS-5503-24-24 | 1 1/2 CD45-SS | 259-2088-24-24 | 1-1/2MF-45 | 140339 | 1-1/2" NPT (1-1/2-11.5) | 1-1/2" NPT (1-1/2-11.5) | 65.1 | 38.1 | 44.3 | 52.3 | 42.9 |
| IH-SS-5503-32-32 | 2 CD45-SS | 259-2088-32-32 | 2MF-45 | 140339 | 2" NPT (2-11.5) | 2" NPT (2-11.5) | 71.4 | 49.2 | 56.2 | 54.6 | 55.6 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Y — Hex across flats — printed "Y HEX" on the manufacturer drawing. D1 — Dimension D1 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. M1 — Dimension M1 on the manufacturer dimension drawing. M2 — Dimension M2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Aeroquip, Parker or SSP. Aeroquip, Parker or SSP part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
This listing is matched size by size to the series below. The size table gives the exact equivalent part number for every Indus part number.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
Can I match a Parker part number?▾
Is there a carbon-steel version?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- 45° Bogen NPT Außengewinde
- fr
- mâle coude 45° NPT
- es
- macho NPT codo 45°
- it
- maschio gomito 45° NPT
Engineers viewing this also looked at
Stainless Steel NPT Female 90° Elbow
Stainless Steel NPT Female 45° Elbow
Stainless Steel NPT Male Tee
Stainless Steel NPT Female Branch Tee
Stainless Steel NPT Street Tee
Stainless Steel NPT Female Run Tee
Stainless Steel NPT Male Branch Tee
