Steel NPTF Male × NPTF Female Cross
Category image · Hoses & FittingsSteel NPTF Male × NPTF Female Cross, forged carbon steel, trivalent zinc plated. 4 part numbers, 1/4" to 3/4"; the size table gives the size on each end for every Indus part number.
Key features
- Body Configuration: cross
- Port A Thread: NPTF (Dryseal), 1/4" to 3/4" (1/4-18 to 3/4-14)
- Port A Sealing: Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
- Nominal Size Range: 1/4" to 3/4"
- Body Configuration
- cross
- Port A Thread
- NPTF (Dryseal), 1/4" to 3/4" (1/4-18 to 3/4-14)
- Port A Sealing
- Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Product description
The Steel NPTF Male × NPTF Female Cross is a cross, in forged carbon steel, trivalent zinc plated. Its ends are NPTF (Dryseal) male, NPTF (Dryseal) female, NPTF (Dryseal) female and NPTF (Dryseal) female. NPTF and NPSM pipe adapters join pipe-threaded ports and swivel ends on hydraulic, pneumatic and lubrication lines.
Construction
- Body: cross
- End 1: NPTF (Dryseal) male
- End 2: NPTF (Dryseal) female
- End 3: NPTF (Dryseal) female
- Ends: 4, all NPTF (Dryseal) male
- Material: forged carbon steel, trivalent zinc plated
Ends and sealing
- NPTF (Dryseal): Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread; ASME B1.20.3.
Sizes
4 part numbers, 1/4" to 3/4". The Sizes & Part Numbers tab lists the size on each end for every one.
- End 1: NPTF (Dryseal), 1/4" to 3/4" (1/4-18 to 3/4-14)
- End 2: NPTF (Dryseal), 1/4" to 3/4" (1/4-18 to 3/4-14)
- End 3: NPTF (Dryseal), 1/4" to 3/4" (1/4-18 to 3/4-14)
Pressure rating
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | cross |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | NPTF (Dryseal), 1/4" to 3/4" (1/4-18 to 3/4-14) |
| Port A Sealing | Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPTF (Dryseal), 1/4" to 3/4" (1/4-18 to 3/4-14) |
| Port B Sealing | Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread |
| Port B Gender | female |
Port C
| Parameter | Value |
|---|---|
| Additional Ports | NPTF (Dryseal) female, NPTF (Dryseal) female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/4" to 3/4" |
Construction
| Parameter | Value |
|---|---|
| Material | forged carbon steel, trivalent zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ASME B1.20.3 |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | End 1 | End 2 | End 3 |
|---|---|---|---|
| IH-ST-5655-04-04-04-04 | 1/4" NPTF (1/4-18) | 1/4" NPTF (1/4-18) | 1/4" NPTF (1/4-18) |
| IH-ST-5655-06-06-06-06 | 3/8" NPTF (3/8-18) | 3/8" NPTF (3/8-18) | 3/8" NPTF (3/8-18) |
| IH-ST-5655-08-08-08-08 | 1/2" NPTF (1/2-14) | 1/2" NPTF (1/2-14) | 1/2" NPTF (1/2-14) |
| IH-ST-5655-12-12-12-12 | 3/4" NPTF (3/4-14) | 3/4" NPTF (3/4-14) | 3/4" NPTF (3/4-14) |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Failure analysis
Using sealant on hydraulic threads: which joints want it, and which are ruined by it
Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.
3 min read
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read
Thread & fitting identification
NPT, NPSM and SAE hose fittings: taper, swivel, flare and O-ring boss
Five American hose-end families that get confused because they share inch sizes. Which seals on the thread, which on a cone, which on an O-ring — and how to tell NPT from NPSM before it leaks.
4 min read
Engineers viewing this also looked at
Steel NPTF Male × NPSM Male Swivel 90° Elbow
Steel NPTF Female × NPSM Male Swivel 90° Elbow
Tompkins 1501-LL Male NPTF × Female NPSM Swivel 90° Elbow, Extra Long
Tompkins 5406-CAP Female NPTF Cap
Tompkins 5406-FLP Male NPTF Flush Plug
Tompkins 5406-HHP Male NPTF Hollow Hex Plug
Tompkins 5500-S Male NPTF × Male NPTF Swivel 90° Elbow
