Die-Cast Single Pulley — Zinc Alloy
Die-Cast Single Pulley, in 6 sizes, 3/4″ to 2″. Load rating on request. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Die-Cast Single Pulley
- Size range: 3/4″ to 2″
- Size range
- 3/4″ to 2″
- Material
- Zinc alloy
- Finish
- Zinc plated
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull. Zinc alloy, zinc plated.
Sizes
6 sizes, 3/4″ to 2″. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Die-Cast Single Pulley |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/4″ to 2″ |
Construction
| Parameter | Value |
|---|---|
| Material | Zinc alloy |
| Finish | Zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizes| Indus part no. | Size | Rope size | Weight (kg/100 pcs) |
|---|---|---|---|
| IH-LR-BP-DCS-075-R012 | 3/4″ | 1/8″ | 2.3 |
| IH-LR-BP-DCS-075-R019 | 3/4″ | 3/16″ | 2.4 |
| IH-LR-BP-DCS-100 | 1″ | 1/4″ | 4.7 |
| IH-LR-BP-DCS-150-R031 | 1-1/2″ | 5/16″ | 10.7 |
| IH-LR-BP-DCS-150-R038 | 1-1/2″ | 3/8″ | 11 |
| IH-LR-BP-DCS-200 | 2″ | 3/8″ | 20.5 |
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the die-cast single pulley come in?▾
Can a snatch block be used for lifting?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Die-Cast Single Swivel Pulley — Zinc Alloy
Double Pulley Block with Oval Eye — Type A
Double Pulley Block with Oval Eye — Type B
Die-Cast Pulley with Nylon Sheave
