Die-Cast Double Pulley — Zinc Alloy, 3/4–1-1/2″

Die-Cast Double Pulley, in 5 sizes, 3/4″ to 1-1/2″. Load rating on request. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Die-Cast Double Pulley
- Size range: 3/4″ to 1-1/2″
- Size range
- 3/4″ to 1-1/2″
- Material
- Zinc alloy
- Finish
- Zinc plated
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull. Zinc alloy, zinc plated.
Sizes
5 sizes, 3/4″ to 1-1/2″. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Die-Cast Double Pulley |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/4″ to 1-1/2″ |
Construction
| Parameter | Value |
|---|---|
| Material | Zinc alloy |
| Finish | Zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-LR-BP-DCD-075-R012
- Size
- 3/4″
- Rope size
- 1/8″
- Weight (kg/100 pcs)
- 4
- Indus part no.IH-LR-BP-DCD-075-R019
- Size
- 3/4″
- Rope size
- 3/16″
- Weight (kg/100 pcs)
- 4.8
- Indus part no.IH-LR-BP-DCD-100
- Size
- 1″
- Rope size
- 1/4″
- Weight (kg/100 pcs)
- 8
- Indus part no.IH-LR-BP-DCD-150-R031
- Size
- 1-1/2″
- Rope size
- 5/16″
- Weight (kg/100 pcs)
- 17
- Indus part no.IH-LR-BP-DCD-150-R038
- Size
- 1-1/2″
- Rope size
- 3/8″
- Weight (kg/100 pcs)
- 17.5
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Die-Cast Double Pulley — Zinc Alloy and what is it used for?▾
Which sizes of Die-Cast Double Pulley — Zinc Alloy are available?▾
How do I choose the right size of Die-Cast Double Pulley — Zinc Alloy?▾
What load rating does the Die-Cast Double Pulley — Zinc Alloy have?▾
How do I order a specific size of the Die-Cast Double Pulley — Zinc Alloy?▾
When should I choose the Die-Cast Double Pulley — Zinc Alloy instead of the Die-Cast Double Pulley, Fixed Eye — Zinc Alloy?▾
What material and finish does the Die-Cast Double Pulley — Zinc Alloy have?▾
What standard and certificate come with the Die-Cast Double Pulley — Zinc Alloy?▾
What can the Die-Cast Double Pulley — Zinc Alloy be connected to?▾
How do I inspect the Die-Cast Double Pulley — Zinc Alloy before use?▾
What are the typical applications of the Die-Cast Double Pulley — Zinc Alloy?▾
Can I buy the Die-Cast Double Pulley — Zinc Alloy from Indus ex-stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








