SS Storz Coupling-Long Shank

SS Storz Coupling-Long Shank — stainless steel Storz head with a long hose shank for banding or crimping. Sizes 1-1/2"–5". SS304 or 316. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Storz Coupling / Adapter
- Coupling Type / Variant: Storz Coupling & Adapter — Storz Coupling-Long Shank
- End A Configuration: Storz head
- End B Configuration: Long hose shank, for banding or crimping
- Size Range: 1-1/2" to 5"
- Coupling Family
- Storz Coupling / Adapter
- Coupling Type / Variant
- Storz Coupling & Adapter — Storz Coupling-Long Shank
- End A Configuration
- Storz head
- End B Configuration
- Long hose shank, for banding or crimping
- Size Range
- 1-1/2" to 5"
Product description
The SS Storz Coupling-Long Shank is a Storz Coupling / Adapter from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Storz Coupling / Adapter
- Coupling type: Storz Coupling & Adapter — Storz Coupling-Long Shank
- End A: Storz head
- End B: Long hose shank, for banding or crimping
Specifications
- Size range: 1-1/2"–5"
- Material: SS304 or 316
- Working pressure: Not published by Sunpool. Give us your working pressure and medium and we will check it with the manufacturer.
- Seal: Discharge gasket in the head as standard; suction gasket to order (Sunpool code S)
Manufacturer notes
- Stainless Steel Storz Coupling with long shank for binding or crimping.
About the family
Storz is a symmetrical hose coupling: every head is identical, with two hooked lugs and a ring, so there is no male or female half. Two heads of the same size are pressed face to face and turned until the lugs lock. A Storz size is identified by the distance across its lugs, which is why two heads made for nearly the same hose bore can be different sizes. Sunpool makes the range in cast aluminium (A356), forged aluminium (6061-T6), brass, bronze and stainless steel: long-shank hose couplings, thread adapters, fire department connection fittings, safety-latch couplings and adapters, gaskets and clamps.
Selection and service notes
Match the Storz size, not just the hose bore: check the lug distance or the size marking. Each joint seals on the gasket in the face of the heads, so inspect it at every make-up; Sunpool fits a discharge gasket as standard and a suction gasket to order. A safety latch stops the heads turning apart where a hose is dragged or vibrates. Storz does not connect to cam and groove, Guillemin or threaded fittings without an adapter.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: Storz coupling sizes and lug distances.
Sunpool sizes
Sunpool makes this coupling in 304 or 316 stainless steel, 1-1/2"–5"; its part-number list gives the 316 version. A Storz size is identified by its lug distance, the measurement across the two lugs, which is what tells sizes with the same hose bore apart. Order by the Indus part number in the size table or by the Sunpool part number for the material you need.
| Hose size | Storz size | Lug distance (mm) | Sunpool part no., 316 stainless steel |
|---|---|---|---|
| 1-1/2" | 38 | — | SZ-S6-40-L |
| 2" | 52C | 66 | SZ-S6-50-L |
| 2-1/2" | 65 | 81 | SZ-S6-65-L |
| 3" | 75B | 89 | SZ-S6-75-L |
| 4" | 100 | 115 | SZ-S6-100-L |
| — | 110A | 133 | SZ-S6-110-L |
| 5" | 125 | 148 | SZ-S6-125-L |
Sizes, dimensions and part numbers from Sunpool’s catalogue page for this part and its Storz part-number list, checked 7 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Storz Coupling / Adapter |
| Coupling Type / Variant | Storz Coupling & Adapter — Storz Coupling-Long Shank |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Storz head |
| End B Configuration | Long hose shank, for banding or crimping |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1-1/2" to 5" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | SS304 or 316 |
| Seal / Gasket | Discharge gasket in the head as standard; suction gasket to order (Sunpool code S) |
Notes
| Parameter | Value |
|---|---|
| Notes | Stainless Steel Storz Coupling with long shank for binding or crimping. |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-3-38
- Nominal size
- 1-1/2" (Storz 38)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-3-52
- Nominal size
- 2" (Storz 52C)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-3-65
- Nominal size
- 2-1/2" (Storz 65)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-3-75
- Nominal size
- 3" (Storz 75B)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-3-100
- Nominal size
- 4" (Storz 100)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-3-110
- Nominal size
- Storz 110A
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-3-125
- Nominal size
- 5" (Storz 125)
What is the SS Storz Coupling-Long Shank and what is it used for?▾
How do I read the part numbers of the SS Storz Coupling-Long Shank, such as IH-STZ-STORZ-COUPLING-LONG-SHANK-3-38?▾
What sizes does the SS Storz Coupling-Long Shank come in?▾
How do I choose the right size of the SS Storz Coupling-Long Shank?▾
What is the working pressure of the SS Storz Coupling-Long Shank?▾
What is the SS Storz Coupling-Long Shank made of?▾
What does the SS Storz Coupling-Long Shank connect to?▾
How should the SS Storz Coupling-Long Shank be inspected and maintained?▾
How does the SS Storz Coupling-Long Shank compare with the AL Storz Coupling-Long Shank?▾
Where is the SS Storz Coupling-Long Shank made?▾
Is the SS Storz Coupling-Long Shank available in another finish or material?▾
Is the SS Storz Coupling-Long Shank in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Storz-Kupplung Schlauchtülle
- fr
- raccord Storz douille cannelée
- es
- acoplamiento Storz espiga portamanguera
- it
- raccordo Storz portagomma
From the blog
Written about this range
Industrial hose
Storz coupling sizes: lug distance, gaskets and the parts that make a connection
A Storz coupling has no male or female, and its size is the distance between the lugs, not the bore. How to identify one, which gasket goes in it, and what the fire-connection versions add.
5 min read
Industrial hose
Guillemin couplings explained: the French symmetrical coupling and its lock ring
Guillemin is the symmetrical half-turn coupling of French fire and industrial water service. How it connects, what the lock ring is for, and how to order the right tail.
4 min read
Industrial hose
Industrial hose couplings: how to identify and choose every common family
Cam and groove, Storz, Bauer, Guillemin, GOST, claw, ground joint, EN 14420, KC and flanges. How to tell them apart in thirty seconds, which duty each one suits, and how the coupling sets the rating.
7 min read







